From mboxrd@z Thu Jan 1 00:00:00 1970 From: Date: Fri, 17 Aug 2001 20:30:53 +0000 Subject: xircom cbem56g-100 support Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org hi, i'm very confused. today i decided to test the in-kernel pcmcia support. after a few hours of fiddling, i got my wavelan card to work, no problem there. then i tried to get my xircom cbem56g-100 to work. the pcmcia-cs documentation says: "Xircom CardBus cards are supported by a separate driver ('Xircom Tulip-like CardBus', xircom_tulip_cb, CONFIG_PCMCIA_XIRTULIP). Hot plug PCI drivers are not managed by cardmgr; they are managed by the "hotplug" subsystem." and i've even seen david hinds post that "cardmgr recognized that this is a hot plug PCI driver, so it is the responsibility of the Linux hotplug subsystem to load the driver." so, i download and install the latest hotplug stuff. and, here is what i find in the /etc/hotplug/blacklist: # tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices de4x5 xircom_tulip_cb dmfe so, can somebody please help me before i just give up (again) and go back to the pcmcia-cs stuff? one last question: how do the two interoperate? because now i have some cardbus cards and some not. - brett _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel