From mboxrd@z Thu Jan  1 00:00:00 1970
From: Matthias Leonhardt <i7lema@rz.uni-jena.de>
Date: Wed, 29 Aug 2001 22:10:20 +0000
Subject: D-Link 660TX with tulip - but no eth0
Message-Id: <marc-linux-hotplug-99912313017021@msgid-missing>
List-Id: <linux-hotplug.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-hotplug@vger.kernel.org

Hello hotpluggers,

after I properly set up my kernel 2.4.9 to use hotplugging and
pccard to get my networkcard running the hotplug-script loads successful
the tulip_cb - module without any error. 
PCI enables the device 15:00.0  (0000 -} 0003) and lsmod shows that 
tulip_cb is loaded. But ifconfig eth0 up fails because no eth0 exists.
What should I do to get an eth0-device from the tulib_cb - Module?

thanks for Your hints!

bye Leo

_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel