From mboxrd@z Thu Jan  1 00:00:00 1970
From: David Hinds <dhinds@sonic.net>
Date: Thu, 30 Aug 2001 02:17:37 +0000
Subject: Re: D-Link 660TX with tulip - but no eth0
Message-Id: <marc-linux-hotplug-99913811527039@msgid-missing>
List-Id: <linux-hotplug.vger.kernel.org>
References: <marc-linux-hotplug-99912313017021@msgid-missing>
In-Reply-To: <marc-linux-hotplug-99912313017021@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-hotplug@vger.kernel.org

On Thu, Aug 30, 2001 at 12:10:20AM +0200, Matthias Leonhardt wrote:
> Hello hotpluggers,
> 
> after I properly set up my kernel 2.4.9 to use hotplugging and
> pccard to get my networkcard running the hotplug-script loads successful
> the tulip_cb - module without any error. 

The hotplug script should not load tulip_cb because tulip_cb is an
old-style CardBus driver and is "owned" by cardmgr; the correct
hotplug driver would be the plain tulip module.

-- Dave

_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel