public inbox for linux-hwmon@vger.kernel.org
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.vnet.ibm.com>
To: linux@roeck-us.net
Cc: jdelvare@suse.com, linux-hwmon@vger.kernel.org,
	linux-kernel@vger.kernel.org, andrew@aj.id.au,
	eajames@linux.vnet.ibm.com,
	"Edward A. James" <eajames@us.ibm.com>
Subject: [PATCH v2] hwmon: (pmbus/core): Prevent unintentional setting of page to 0xFF
Date: Fri, 27 Oct 2017 11:55:05 -0500	[thread overview]
Message-ID: <1509123305-10050-1-git-send-email-eajames@linux.vnet.ibm.com> (raw)

From: "Edward A. James" <eajames@us.ibm.com>

The pmbus core may call read/write word data functions with a page value
of -1, intending to perform the operation without setting the page.
However, the read/write word data functions accept only unsigned 8-bit
page numbers, and therefore cannot check for negative page number to
avoid setting the page. This results in setting the page number to 0xFF.
This may result in errors or undefined behavior of some devices
(specifically the ir35221, which allows the page to be set to 0xFF,
but some subsequent operations to read registers may fail).

Switch the pmbus_set_page page parameter to an integer and perform the
check for negative page there. Make read/write functions consistent in
accepting an integer page number parameter.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
---

Changes since v1:
 * Move check for negative page to pmbus_set_page and change pmbus_set_page
   page parameter to int.

 drivers/hwmon/pmbus/pmbus.h      |  6 +++---
 drivers/hwmon/pmbus/pmbus_core.c | 25 +++++++++++--------------
 2 files changed, 14 insertions(+), 17 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 4efa2bd..fa613bd 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -404,9 +404,9 @@ struct pmbus_driver_info {
 /* Function declarations */
 
 void pmbus_clear_cache(struct i2c_client *client);
-int pmbus_set_page(struct i2c_client *client, u8 page);
-int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
-int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
+int pmbus_set_page(struct i2c_client *client, int page);
+int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg);
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg, u16 word);
 int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
 int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
 int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 302f0ae..52a58b8 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -136,13 +136,13 @@ void pmbus_clear_cache(struct i2c_client *client)
 }
 EXPORT_SYMBOL_GPL(pmbus_clear_cache);
 
-int pmbus_set_page(struct i2c_client *client, u8 page)
+int pmbus_set_page(struct i2c_client *client, int page)
 {
 	struct pmbus_data *data = i2c_get_clientdata(client);
 	int rv = 0;
 	int newpage;
 
-	if (page != data->currpage) {
+	if (page >= 0 && page != data->currpage) {
 		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
 		newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
 		if (newpage != page)
@@ -158,11 +158,9 @@ int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
 {
 	int rv;
 
-	if (page >= 0) {
-		rv = pmbus_set_page(client, page);
-		if (rv < 0)
-			return rv;
-	}
+	rv = pmbus_set_page(client, page);
+	if (rv < 0)
+		return rv;
 
 	return i2c_smbus_write_byte(client, value);
 }
@@ -186,7 +184,8 @@ static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)
 	return pmbus_write_byte(client, page, value);
 }
 
-int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word)
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
+			  u16 word)
 {
 	int rv;
 
@@ -219,7 +218,7 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
 	return pmbus_write_word_data(client, page, reg, word);
 }
 
-int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg)
+int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg)
 {
 	int rv;
 
@@ -255,11 +254,9 @@ int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
 {
 	int rv;
 
-	if (page >= 0) {
-		rv = pmbus_set_page(client, page);
-		if (rv < 0)
-			return rv;
-	}
+	rv = pmbus_set_page(client, page);
+	if (rv < 0)
+		return rv;
 
 	return i2c_smbus_read_byte_data(client, reg);
 }
-- 
1.8.3.1


             reply	other threads:[~2017-10-27 16:55 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-27 16:55 Eddie James [this message]
2017-10-28 15:43 ` [v2] hwmon: (pmbus/core): Prevent unintentional setting of page to 0xFF Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1509123305-10050-1-git-send-email-eajames@linux.vnet.ibm.com \
    --to=eajames@linux.vnet.ibm.com \
    --cc=andrew@aj.id.au \
    --cc=eajames@us.ibm.com \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox