From: Javier Martinez Canillas <javier@osg.samsung.com>
To: linux-kernel@vger.kernel.org
Cc: Javier Martinez Canillas <javier@osg.samsung.com>,
linux-hwmon@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH v2 1/2] hwmon: (lm87) Remove unused I2C devices driver_data
Date: Wed, 12 Apr 2017 21:21:38 -0300 [thread overview]
Message-ID: <20170413002139.5983-1-javier@osg.samsung.com> (raw)
The I2C device ID entries set a .driver_data but this data is never
looked up by the driver. So don't set it and also remove the enum.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes in v2:
- Use the correct driver in subject line.
drivers/hwmon/lm87.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 04a7a1ddb030..c0766e7392d3 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -75,8 +75,6 @@
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-enum chips { lm87, adm1024 };
-
/*
* The LM87 registers
*/
@@ -981,8 +979,8 @@ static int lm87_probe(struct i2c_client *client, const struct i2c_device_id *id)
*/
static const struct i2c_device_id lm87_id[] = {
- { "lm87", lm87 },
- { "adm1024", adm1024 },
+ { "lm87", 0 },
+ { "adm1024", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm87_id);
--
2.9.3
next reply other threads:[~2017-04-13 0:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-13 0:21 Javier Martinez Canillas [this message]
2017-04-13 0:21 ` [PATCH v2 2/2] hwmon: (lm87) Add OF device ID table Javier Martinez Canillas
2017-04-13 13:10 ` [v2,2/2] " Guenter Roeck
2017-04-13 13:08 ` [v2,1/2] hwmon: (lm87) Remove unused I2C devices driver_data Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170413002139.5983-1-javier@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox