From: Guenter Roeck <linux@roeck-us.net>
To: Heiko Schocher <hs@denx.de>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>,
Jean Delvare <jdelvare@suse.com>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] hwmon: tmp103: use SIMPLE_DEV_PM_OPS helper macro
Date: Mon, 24 Apr 2017 08:45:40 -0700 [thread overview]
Message-ID: <20170424154540.GB31126@roeck-us.net> (raw)
In-Reply-To: <58FD77DA.9000007@denx.de>
On Mon, Apr 24, 2017 at 05:58:18AM +0200, Heiko Schocher wrote:
> Hello Guenter, Rahul,
>
> Am 23.04.2017 um 17:43 schrieb Guenter Roeck:
> >Hi Rahul,
> >
> >On 04/23/2017 07:10 AM, Rahul Bedarkar wrote:
> >>Replace ifdefs with SIMPLE_DEV_PM_OPS helper macro.
> >>
> >>Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
> >
> >Thanks a lot for your patch.
> >
> >While I in general prefer code that avoids #ifdef, I have seen patches
> >which do the opposite when handling PM code. It appears that it is
> >unsettled if __maybe_unused or #ifdef should be used in such situations.
> >Until that is the case, I won't accept patches changing one into another
> >unless they are from the driver author or Acked by the driver author.
>
> Hmm.. I like this patch too, but have also no idea, what is preffered.
>
> Looking into drivers/hwmon
>
> pollux:linux hs [master] $ grep -lr __maybe_unused drivers/hwmon/
> drivers/hwmon/tmp108.c
> drivers/hwmon/nct6775.c
> drivers/hwmon/hwmon-vid.c
> drivers/hwmon/max31722.c
>
> Ok, there are hwmon drivers, which use this version already ...
>
> pollux:linux hs [master] $ grep -lr CONFIG_PM drivers/hwmon/
> drivers/hwmon/max6639.c
> drivers/hwmon/jc42.c
> drivers/hwmon/fam15h_power.c
> drivers/hwmon/tmp102.c
> drivers/hwmon/gpio-fan.c
> drivers/hwmon/pwm-fan.c
> drivers/hwmon/tmp103.c
> drivers/hwmon/pmbus/Makefile
> drivers/hwmon/lm75.c
> drivers/hwmon/nct6683.c
> drivers/hwmon/adt7x10.h
> drivers/hwmon/w83627hf.c
> drivers/hwmon/abituguru3.c
> drivers/hwmon/Makefile
> drivers/hwmon/acpi_power_meter.c
> drivers/hwmon/adt7x10.c
> drivers/hwmon/abituguru.c
> drivers/hwmon/w83627ehf.c
>
> May this conversion should be done in a patch, which touches more
> devices?
>
> Nevertheless, I like this approach, so:
>
> Acked-by: Heiko Schocher <hs@denx.de>
>
Thanks, applied to hwmon-next.
Guenter
> bye,
> Heiko
>
> >
> >Thanks,
> >Guenter
> >
> >>---
> >> drivers/hwmon/tmp103.c | 17 ++++-------------
> >> 1 file changed, 4 insertions(+), 13 deletions(-)
> >>
> >>diff --git a/drivers/hwmon/tmp103.c b/drivers/hwmon/tmp103.c
> >>index d0bb28b..7f85b14 100644
> >>--- a/drivers/hwmon/tmp103.c
> >>+++ b/drivers/hwmon/tmp103.c
> >>@@ -150,8 +150,7 @@ static int tmp103_probe(struct i2c_client *client,
> >> return PTR_ERR_OR_ZERO(hwmon_dev);
> >> }
> >>
> >>-#ifdef CONFIG_PM
> >>-static int tmp103_suspend(struct device *dev)
> >>+static int __maybe_unused tmp103_suspend(struct device *dev)
> >> {
> >> struct regmap *regmap = dev_get_drvdata(dev);
> >>
> >>@@ -159,7 +158,7 @@ static int tmp103_suspend(struct device *dev)
> >> TMP103_CONF_SD_MASK, 0);
> >> }
> >>
> >>-static int tmp103_resume(struct device *dev)
> >>+static int __maybe_unused tmp103_resume(struct device *dev)
> >> {
> >> struct regmap *regmap = dev_get_drvdata(dev);
> >>
> >>@@ -167,15 +166,7 @@ static int tmp103_resume(struct device *dev)
> >> TMP103_CONF_SD_MASK, TMP103_CONF_SD);
> >> }
> >>
> >>-static const struct dev_pm_ops tmp103_dev_pm_ops = {
> >>- .suspend = tmp103_suspend,
> >>- .resume = tmp103_resume,
> >>-};
> >>-
> >>-#define TMP103_DEV_PM_OPS (&tmp103_dev_pm_ops)
> >>-#else
> >>-#define TMP103_DEV_PM_OPS NULL
> >>-#endif /* CONFIG_PM */
> >>+static SIMPLE_DEV_PM_OPS(tmp103_dev_pm_ops, tmp103_suspend, tmp103_resume);
> >>
> >> static const struct i2c_device_id tmp103_id[] = {
> >> { "tmp103", 0 },
> >>@@ -193,7 +184,7 @@ static struct i2c_driver tmp103_driver = {
> >> .driver = {
> >> .name = "tmp103",
> >> .of_match_table = of_match_ptr(tmp103_of_match),
> >>- .pm = TMP103_DEV_PM_OPS,
> >>+ .pm = &tmp103_dev_pm_ops,
> >> },
> >> .probe = tmp103_probe,
> >> .id_table = tmp103_id,
> >>
> >
>
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2017-04-24 15:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-23 14:10 [PATCH] hwmon: tmp103: use SIMPLE_DEV_PM_OPS helper macro Rahul Bedarkar
2017-04-23 15:43 ` Guenter Roeck
2017-04-24 3:58 ` Heiko Schocher
2017-04-24 6:49 ` Rahul Bedarkar
2017-04-24 15:44 ` Guenter Roeck
2017-04-24 15:45 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170424154540.GB31126@roeck-us.net \
--to=linux@roeck-us.net \
--cc=hs@denx.de \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rahulbedarkar89@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox