From: Guenter Roeck <linux@roeck-us.net>
To: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
Cc: zbr@ioremap.net, linux-kernel@vger.kernel.org, jdelvare@suse.com,
linux-hwmon@vger.kernel.org
Subject: Re: [PATCH linux v3 3/3] drivers: w1: add hwmon temp support for w1_therm
Date: Thu, 13 Jul 2017 14:40:00 -0700 [thread overview]
Message-ID: <20170713214000.GA32381@roeck-us.net> (raw)
In-Reply-To: <20170713210649.16188-4-jaghu@google.com>
On Thu, Jul 13, 2017 at 02:06:49PM -0700, Jaghathiswari Rankappagounder Natarajan wrote:
> This change adds hwmon temp support for w1_therm.
>
> Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
> Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
> ---
> v2
> - make changes to support hwmon_device_register_with_info mentioned by Guenter.
>
> v3
> - used IS_REACHABLE()
> - rearranged the code to not require forward declarations
> - used family_data
> - incremented the reference count with the bus mutex locked
> - corrected indentation
> - removed dev_warn message
> - simplified returning mode
> - removed write function
>
> drivers/w1/slaves/w1_therm.c | 91 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 91 insertions(+)
>
> diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
> index 64e6a8f38410..b7d13220dd8f 100644
> --- a/drivers/w1/slaves/w1_therm.c
> +++ b/drivers/w1/slaves/w1_therm.c
> @@ -29,6 +29,7 @@
> #include <linux/types.h>
> #include <linux/slab.h>
> #include <linux/delay.h>
> +#include <linux/hwmon.h>
>
> #include "../w1.h"
> #include "../w1_int.h"
> @@ -118,19 +119,77 @@ static struct attribute *w1_ds28ea00_attrs[] = {
> &dev_attr_w1_seq.attr,
> NULL,
> };
> +
> ATTRIBUTE_GROUPS(w1_therm);
> ATTRIBUTE_GROUPS(w1_ds28ea00);
>
> +#if IS_REACHABLE(CONFIG_HWMON)
> +static int w1_read_temp(struct device *dev, u32 attr, int channel,
> + long *val);
> +
> +static umode_t w1_is_visible(const void *_data, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + return attr == hwmon_temp_input ? 0444 : 0;
> +}
> +
> +static int w1_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + switch (type) {
> + case hwmon_temp:
> + return w1_read_temp(dev, attr, channel, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static const u32 w1_temp_config[] = {
> + HWMON_T_INPUT,
> + 0
> +};
> +
> +static const struct hwmon_channel_info w1_temp = {
> + .type = hwmon_temp,
> + .config = w1_temp_config,
> +};
> +
> +static const struct hwmon_channel_info *w1_info[] = {
> + &w1_temp,
> + NULL
> +};
> +
> +static const struct hwmon_ops w1_hwmon_ops = {
> + .is_visible = w1_is_visible,
> + .read = w1_read,
> +};
> +
> +static const struct hwmon_chip_info w1_chip_info = {
> + .ops = &w1_hwmon_ops,
> + .info = w1_info,
> +};
#define W1_CHIPINFO (&w1_chip_info)
#else
#define W1_CHIPINFO NULL
[saves you a couple of ifdefs]
> +#endif
> +
> static struct w1_family_ops w1_therm_fops = {
> .add_slave = w1_therm_add_slave,
> .remove_slave = w1_therm_remove_slave,
> .groups = w1_therm_groups,
> +#if IS_REACHABLE(CONFIG_HWMON)
> + .chip_info = &w1_chip_info,
> +#else
> + .chip_info = NULL,
> +#endif
.chip_info = W1_CHIP_INFO,
> };
>
> static struct w1_family_ops w1_ds28ea00_fops = {
> .add_slave = w1_therm_add_slave,
> .remove_slave = w1_therm_remove_slave,
> .groups = w1_ds28ea00_groups,
> +#if IS_REACHABLE(CONFIG_HWMON)
> + .chip_info = &w1_chip_info,
> +#else
> + .chip_info = NULL,
> +#endif
.chip_info = W1_CHIP_INFO,
> };
>
> static struct w1_family w1_therm_family_DS18S20 = {
> @@ -559,6 +618,38 @@ static ssize_t w1_slave_show(struct device *device,
> return ret;
> }
>
> +#if IS_REACHABLE(CONFIG_HWMON)
> +static int w1_read_temp(struct device *device, u32 attr, int channel,
> + long *val)
> +{
> + struct w1_slave *sl = dev_get_drvdata(device);
> + struct therm_info info;
> + u8 fid = sl->family->fid;
> + int ret;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + ret = read_therm(device, sl, &info);
> + if (ret)
> + return ret;
> +
> + if (!info.verdict) {
> + ret = -EIO;
> + return ret;
> + }
> +
> + *val = w1_convert_temp(info.rom, fid);
> + ret = 0;
> + break;
> + default:
> + ret = -EOPNOTSUPP;
Formatting ?
> + break;
> + }
> +
> + return ret;
> +}
> +#endif
> +
> #define W1_42_CHAIN 0x99
> #define W1_42_CHAIN_OFF 0x3C
> #define W1_42_CHAIN_OFF_INV 0xC3
> --
> 2.13.2.932.g7449e964c-goog
>
prev parent reply other threads:[~2017-07-13 21:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-13 21:06 [PATCH linux v3 0/3] Export 1-wire thermal sensors as hwmon device Jaghathiswari Rankappagounder Natarajan
2017-07-13 21:06 ` [PATCH linux v3 1/3] drivers: w1: add hwmon support structures Jaghathiswari Rankappagounder Natarajan
2017-07-13 21:45 ` Guenter Roeck
2017-07-13 21:06 ` [PATCH linux v3 2/3] drivers: w1: refactor w1_slave_show to make the temp reading functionality separate Jaghathiswari Rankappagounder Natarajan
2017-07-13 21:48 ` Guenter Roeck
2017-07-13 21:06 ` [PATCH linux v3 3/3] drivers: w1: add hwmon temp support for w1_therm Jaghathiswari Rankappagounder Natarajan
2017-07-13 21:40 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170713214000.GA32381@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jaghu@google.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=zbr@ioremap.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox