From: Guenter Roeck <linux@roeck-us.net>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Jean Delvare <jdelvare@suse.com>,
linux-hwmon@vger.kernel.org, Nishanth Menon <nm@ti.com>,
Simon Guinot <simon.guinot@sequanux.org>,
Jamie Lentin <jm@lentin.co.uk>
Subject: Re: [5/9] hwmon: gpio-fan: Mandate OF_GPIO and cut pdata path
Date: Sun, 8 Oct 2017 07:29:19 -0700 [thread overview]
Message-ID: <20171008142919.GA4418@roeck-us.net> (raw)
In-Reply-To: <20170925230911.20824-6-linus.walleij@linaro.org>
On Tue, Sep 26, 2017 at 01:09:07AM +0200, Linus Walleij wrote:
> We have no users of platform data, we made platform data driver-local,
> so cut all #ifdefs for the platform data case, and depend on the
> Kconfig CONFIG_OF_GPIO symbol.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> drivers/hwmon/Kconfig | 1 +
> drivers/hwmon/gpio-fan.c | 36 ++++++++++--------------------------
> 2 files changed, 11 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index d65431417b17..9b0e1db2202d 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -552,6 +552,7 @@ config SENSORS_G762
>
> config SENSORS_GPIO_FAN
> tristate "GPIO fan"
> + depends on OF_GPIO
> depends on GPIOLIB || COMPILE_TEST
> depends on THERMAL || THERMAL=n
> help
> diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
> index ad7d8fdf4f81..55dbdb223e02 100644
> --- a/drivers/hwmon/gpio-fan.c
> +++ b/drivers/hwmon/gpio-fan.c
> @@ -453,7 +453,6 @@ static const struct thermal_cooling_device_ops gpio_fan_cool_ops = {
> .set_cur_state = gpio_fan_set_cur_state,
> };
>
> -#ifdef CONFIG_OF_GPIO
> /*
> * Translate OpenFirmware node properties into platform_data
> */
> @@ -556,7 +555,6 @@ static const struct of_device_id of_gpio_fan_match[] = {
> {},
> };
> MODULE_DEVICE_TABLE(of, of_gpio_fan_match);
> -#endif /* CONFIG_OF_GPIO */
>
> static int gpio_fan_probe(struct platform_device *pdev)
> {
> @@ -564,29 +562,22 @@ static int gpio_fan_probe(struct platform_device *pdev)
> struct gpio_fan_data *fan_data;
> struct device *dev = &pdev->dev;
> struct device_node *np = dev->of_node;
> - struct gpio_fan_platform_data *pdata = dev_get_platdata(dev);
> + struct gpio_fan_platform_data *pdata;
>
> fan_data = devm_kzalloc(dev, sizeof(struct gpio_fan_data),
> GFP_KERNEL);
> if (!fan_data)
> return -ENOMEM;
>
> -#ifdef CONFIG_OF_GPIO
> - if (!pdata) {
> - pdata = devm_kzalloc(dev,
> - sizeof(struct gpio_fan_platform_data),
> - GFP_KERNEL);
> - if (!pdata)
> - return -ENOMEM;
> -
> - err = gpio_fan_get_of_pdata(dev, pdata);
> - if (err)
> - return err;
> - }
> -#else /* CONFIG_OF_GPIO */
> + pdata = devm_kzalloc(dev,
> + sizeof(struct gpio_fan_platform_data),
> + GFP_KERNEL);
> if (!pdata)
> - return -EINVAL;
> -#endif /* CONFIG_OF_GPIO */
> + return -ENOMEM;
> +
> + err = gpio_fan_get_of_pdata(dev, pdata);
> + if (err)
> + return err;
>
> fan_data->dev = dev;
> platform_set_drvdata(pdev, fan_data);
> @@ -615,17 +606,12 @@ static int gpio_fan_probe(struct platform_device *pdev)
> gpio_fan_groups);
> if (IS_ERR(fan_data->hwmon_dev))
> return PTR_ERR(fan_data->hwmon_dev);
> -#ifdef CONFIG_OF_GPIO
> +
> /* Optional cooling device register for Device tree platforms */
> fan_data->cdev = thermal_of_cooling_device_register(np,
> "gpio-fan",
> fan_data,
> &gpio_fan_cool_ops);
> -#else /* CONFIG_OF_GPIO */
> - /* Optional cooling device register for non Device tree platforms */
> - fan_data->cdev = thermal_cooling_device_register("gpio-fan", fan_data,
> - &gpio_fan_cool_ops);
> -#endif /* CONFIG_OF_GPIO */
>
> dev_info(dev, "GPIO fan initialized\n");
>
> @@ -686,9 +672,7 @@ static struct platform_driver gpio_fan_driver = {
> .driver = {
> .name = "gpio-fan",
> .pm = GPIO_FAN_PM,
> -#ifdef CONFIG_OF_GPIO
> .of_match_table = of_match_ptr(of_gpio_fan_match),
> -#endif
> },
> };
>
next prev parent reply other threads:[~2017-10-08 14:29 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-25 23:09 [PATCH 0/9] GPIO controlled fans refactoring Linus Walleij
2017-09-25 23:09 ` [PATCH 1/9] hwmon: gpio-fan: Move DT bindings to the right place Linus Walleij
2017-10-05 20:31 ` Rob Herring
2017-10-08 14:21 ` [1/9] " Guenter Roeck
2017-09-25 23:09 ` [PATCH 2/9] hwmon: gpio-fan: Use local variable pointers Linus Walleij
2017-10-08 14:26 ` [2/9] " Guenter Roeck
2017-09-25 23:09 ` [PATCH 3/9] hwmon: gpio-fan: Localize platform data Linus Walleij
2017-09-25 23:09 ` [PATCH 4/9] hwmon: gpio-fan: Send around device pointer Linus Walleij
2017-10-08 14:28 ` [4/9] " Guenter Roeck
2017-09-25 23:09 ` [PATCH 5/9] hwmon: gpio-fan: Mandate OF_GPIO and cut pdata path Linus Walleij
2017-10-08 14:29 ` Guenter Roeck [this message]
2017-09-25 23:09 ` [PATCH 6/9] hwmon: gpio-fan: Get rid of platform data struct Linus Walleij
2017-10-08 14:32 ` [6/9] " Guenter Roeck
2017-09-25 23:09 ` [PATCH 7/9] hwmon: gpio-fan: Get rid of the gpio alarm struct Linus Walleij
2017-10-08 14:33 ` [7/9] " Guenter Roeck
2017-09-25 23:09 ` [PATCH 8/9] hwmon: gpio-fan: Rename GPIO line state variables Linus Walleij
2017-10-08 14:35 ` [8/9] " Guenter Roeck
2017-09-25 23:09 ` [PATCH 9/9] hwmon: gpio-fan: Convert to use GPIO descriptors Linus Walleij
2017-10-08 14:39 ` [9/9] " Guenter Roeck
2017-10-08 23:05 ` Linus Walleij
2017-10-08 16:20 ` Guenter Roeck
2017-10-08 23:12 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171008142919.GA4418@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.com \
--cc=jm@lentin.co.uk \
--cc=linus.walleij@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=nm@ti.com \
--cc=simon.guinot@sequanux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox