From: Guenter Roeck <linux@roeck-us.net>
To: Eddie James <eajames@linux.vnet.ibm.com>
Cc: jdelvare@suse.com, linux-hwmon@vger.kernel.org,
linux-kernel@vger.kernel.org, andrew@aj.id.au,
"Edward A. James" <eajames@us.ibm.com>
Subject: Re: [prefix=PATCH] drivers: pmbus: core: Prevent calling pmbus_set_page with negative page
Date: Wed, 25 Oct 2017 14:12:34 -0700 [thread overview]
Message-ID: <20171025211234.GA3273@roeck-us.net> (raw)
In-Reply-To: <1508961173-22686-1-git-send-email-eajames@linux.vnet.ibm.com>
On Wed, Oct 25, 2017 at 02:52:53PM -0500, Eddie James wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
>
> For devices with word data registers, the pmbus core may call read/write
> word data functions with a page value of -1, in order to perform the
> operation without setting the page. However, the read/write word data
> functions accept only unsigned 8-bit page numbers, resulting in setting
> a page of 0xFF in this situation. This may result in errors or undefined
> behavior of some devices (specifically the ir35221, which allows the
> page to be set to 0xFF, but some subsequent operations to read registers
> may fail).
>
Good catch.
Subject came off a bit odd.
[prefix=PATCH] drivers: pmbus: core: Prevent ...
Please use "[PATCH] hwmon: (pmbus/core) Prevent ..."
This me wonder if we should move the check into pmbus_set_page()
instead.
int pmbus_set_page(struct i2c_client *client, int page)
{
...
if (page >= 0 && page != data->currpage) {
...
}
What do you think ?
Thanks,
Guenter
> Signed-off-by: Edward A. James <eajames@us.ibm.com>
> ---
> drivers/hwmon/pmbus/pmbus.h | 4 ++--
> drivers/hwmon/pmbus/pmbus_core.c | 29 ++++++++++++++++++-----------
> 2 files changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
> index 4efa2bd..4a16da6 100644
> --- a/drivers/hwmon/pmbus/pmbus.h
> +++ b/drivers/hwmon/pmbus/pmbus.h
> @@ -405,8 +405,8 @@ struct pmbus_driver_info {
>
> void pmbus_clear_cache(struct i2c_client *client);
> int pmbus_set_page(struct i2c_client *client, u8 page);
> -int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
> -int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
> +int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg);
> +int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg, u16 word);
> int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
> int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
> int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 302f0ae..6d6e030 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -186,13 +186,16 @@ static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)
> return pmbus_write_byte(client, page, value);
> }
>
> -int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word)
> +int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
> + u16 word)
> {
> int rv;
>
> - rv = pmbus_set_page(client, page);
> - if (rv < 0)
> - return rv;
> + if (page >= 0) {
> + rv = pmbus_set_page(client, page);
> + if (rv < 0)
> + return rv;
> + }
>
> return i2c_smbus_write_word_data(client, reg, word);
> }
> @@ -219,13 +222,15 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
> return pmbus_write_word_data(client, page, reg, word);
> }
>
> -int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg)
> +int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg)
> {
> int rv;
>
> - rv = pmbus_set_page(client, page);
> - if (rv < 0)
> - return rv;
> + if (page >= 0) {
> + rv = pmbus_set_page(client, page);
> + if (rv < 0)
> + return rv;
> + }
>
> return i2c_smbus_read_word_data(client, reg);
> }
> @@ -269,9 +274,11 @@ int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
> {
> int rv;
>
> - rv = pmbus_set_page(client, page);
> - if (rv < 0)
> - return rv;
> + if (page >= 0) {
> + rv = pmbus_set_page(client, page);
> + if (rv < 0)
> + return rv;
> + }
>
> return i2c_smbus_write_byte_data(client, reg, value);
> }
> --
> 1.8.3.1
>
next prev parent reply other threads:[~2017-10-25 21:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 19:52 [prefix=PATCH] drivers: pmbus: core: Prevent calling pmbus_set_page with negative page Eddie James
2017-10-25 21:12 ` Guenter Roeck [this message]
2017-10-25 21:23 ` Eddie James
2017-10-25 22:08 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171025211234.GA3273@roeck-us.net \
--to=linux@roeck-us.net \
--cc=andrew@aj.id.au \
--cc=eajames@linux.vnet.ibm.com \
--cc=eajames@us.ibm.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox