From: Guenter Roeck <linux@roeck-us.net>
To: Vadim Pasternak <vadimp@mellanox.com>
Cc: linux-hwmon@vger.kernel.org, jiri@resnulli.us, michaelsh@mellanox.com
Subject: Re: [v5,1/1] hwmon: (mlxreg-fan) Add support for Mellanox FAN driver
Date: Tue, 3 Jul 2018 09:16:20 -0700 [thread overview]
Message-ID: <20180703161620.GA17299@roeck-us.net> (raw)
In-Reply-To: <1530601209-23686-1-git-send-email-vadimp@mellanox.com>
On Tue, Jul 03, 2018 at 07:00:09AM +0000, Vadim Pasternak wrote:
> Driver obtains PWM and tachometers registers location according to the
> system configuration and creates FAN/PWM hwmon objects and a cooling
> device. PWM and tachometers are controlled through the on-board
> programmable device, which exports its register map. This device could be
> attached to any bus type, for which register mapping is supported. Single
> instance is created with one PWM control, up to 12 tachometers and one
> cooling device. It could be as many instances as programmable device
> supports.
>
> Currently driver will be activated from the Mellanox platform driver:
> drivers/platform/x86/mlx-platform.c.
> For the future ARM based systems it could be activated from the ARM
> platform module.
>
> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Applied to hwmon-next.
Thanks,
Guenter
next prev parent reply other threads:[~2018-07-03 16:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-03 7:00 [PATCH v5 1/1] hwmon: (mlxreg-fan) Add support for Mellanox FAN driver Vadim Pasternak
2018-07-03 16:16 ` Guenter Roeck [this message]
2018-07-03 19:03 ` [v5,1/1] " Vadim Pasternak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180703161620.GA17299@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jiri@resnulli.us \
--cc=linux-hwmon@vger.kernel.org \
--cc=michaelsh@mellanox.com \
--cc=vadimp@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox