From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-pl1-f193.google.com ([209.85.214.193]:43854 "EHLO mail-pl1-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725730AbeLBFpj (ORCPT ); Sun, 2 Dec 2018 00:45:39 -0500 Date: Sat, 1 Dec 2018 10:32:31 -0800 From: Guenter Roeck To: Corentin Labbe Cc: jdelvare@suse.com, linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 1/2] hwmon: fix typo build -> built Message-ID: <20181201183231.GA14451@roeck-us.net> References: <1543522155-17406-1-git-send-email-clabbe@baylibre.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1543522155-17406-1-git-send-email-clabbe@baylibre.com> Sender: linux-hwmon-owner@vger.kernel.org List-Id: linux-hwmon@vger.kernel.org On Thu, Nov 29, 2018 at 08:09:14PM +0000, Corentin Labbe wrote: > This patch fix a typo where build is used instead of built. > > Signed-off-by: Corentin Labbe Applied to hwmon-next. Thanks, Guenter > --- > drivers/hwmon/Kconfig | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 532a0532d01b..100b7fce1412 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -179,7 +179,7 @@ config SENSORS_ADT7X10 > This module contains common code shared by the ADT7310/ADT7320 and > ADT7410/ADT7420 temperature monitoring chip drivers. > > - If build as a module, the module will be called adt7x10. > + If built as a module, the module will be called adt7x10. > > config SENSORS_ADT7310 > tristate "Analog Devices ADT7310/ADT7320" > @@ -242,7 +242,7 @@ config SENSORS_ADT7475 > ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring > chips. > > - This driver can also be build as a module. If so, the module > + This driver can also be built as a module. If so, the module > will be called adt7475. > > config SENSORS_ASC7621 > @@ -666,7 +666,7 @@ config SENSORS_JZ4740 > If you say yes here you get support for reading adc values from the ADCIN > pin on Ingenic JZ4740 SoC based boards. > > - This driver can also be build as a module. If so, the module will be > + This driver can also be built as a module. If so, the module will be > called jz4740-hwmon. > > config SENSORS_JC42 > @@ -1594,7 +1594,7 @@ config SENSORS_AMC6821 > If you say yes here you get support for the Texas Instruments > AMC6821 hardware monitoring chips. > > - This driver can also be build as a module. If so, the module > + This driver can also be built as a module. If so, the module > will be called amc6821. > > config SENSORS_INA209