From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga04.intel.com ([192.55.52.120]:32558 "EHLO mga04.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726773AbeLRVEY (ORCPT ); Tue, 18 Dec 2018 16:04:24 -0500 From: Jae Hyun Yoo To: Lee Jones , Rob Herring , Jean Delvare , Guenter Roeck , Mark Rutland , Joel Stanley , Andrew Jeffery , Jonathan Corbet , Greg Kroah-Hartman , Gustavo Pimentel , Kishon Vijay Abraham I , Lorenzo Pieralisi , "Darrick J . Wong" , Eric Sandeen , Arnd Bergmann , Wu Hao , Tomohiro Kusumi , "Bryant G . Ly" , Frederic Barrat , "David S . Miller" , Mauro Carvalho Chehab , Andrew Morton , Randy Dunlap , Philippe Ombredanne , Vinod Koul , Stephen Boyd , David Kershner , Uwe Kleine-Konig , Sagar Dharia , Johan Hovold , Thomas Gleixner , Juergen Gross , Cyrille Pitchen Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, openbmc@lists.ozlabs.org, Jae Hyun Yoo Subject: [PATCH v9 01/12] dt-bindings: Add a document of PECI subsystem Date: Tue, 18 Dec 2018 13:04:06 -0800 Message-Id: <20181218210417.30140-2-jae.hyun.yoo@linux.intel.com> In-Reply-To: <20181218210417.30140-1-jae.hyun.yoo@linux.intel.com> References: <20181218210417.30140-1-jae.hyun.yoo@linux.intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-hwmon-owner@vger.kernel.org List-Id: linux-hwmon@vger.kernel.org This commit adds a document of generic PECI bus, adapter and client driver. Cc: Rob Herring Cc: Mark Rutland Cc: Andrew Jeffery Cc: Joel Stanley Signed-off-by: Jae Hyun Yoo Reviewed-by: Haiyue Wang Reviewed-by: James Feist Reviewed-by: Vernon Mauery Reviewed-by: Rob Herring --- .../devicetree/bindings/peci/peci.txt | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/peci/peci.txt diff --git a/Documentation/devicetree/bindings/peci/peci.txt b/Documentation/devicetree/bindings/peci/peci.txt new file mode 100644 index 000000000000..71f26c7c6e58 --- /dev/null +++ b/Documentation/devicetree/bindings/peci/peci.txt @@ -0,0 +1,43 @@ +Generic device tree configuration for PECI adapters +=================================================== + +Required properties: +- #address-cells : Should be <1>. Read more about client addresses below. +- #size-cells : Should be <0>. Read more about client addresses below. + +The cells properties above define that an address of CPU clients of a PECI bus +are described by a single value. + +Example: + peci0: peci-bus@0 { + compatible = "vendor,soc-peci"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + +Generic device tree configuration for PECI clients +================================================== + +Required properties: +- compatible : Should contain name of PECI client. +- reg : Should contain address of a client CPU. According to the PECI + specification, client addresses start from 0x30. + +Example: + peci-bus@0 { + compatible = "vendor,soc-peci"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + peci-client@30 { + compatible = "intel,peci-client"; + reg = <0x30>; + }; + + peci-client@31 { + compatible = "intel,peci-client"; + reg = <0x31>; + }; + }; -- 2.19.1