diff for duplicates of <20190105004904.17947-2-nicoleotsuka@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 8928fcd..874df20 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -5,13 +5,12 @@ powered devices, this mode might be power consuming. This patch adds a "ti,single-shot" property to allow changing the default continuous mode to single-shot operating mode. -Signed-off-by: Nicolin Chen <nicoleots...@gmail.com> +Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> --- Documentation/devicetree/bindings/hwmon/ina3221.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) -diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt -b/Documentation/devicetree/bindings/hwmon/ina3221.txt +diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt index a7b25caa2b8e..fa63b6171407 100644 --- a/Documentation/devicetree/bindings/hwmon/ina3221.txt +++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt @@ -22,8 +21,7 @@ index a7b25caa2b8e..fa63b6171407 100644 + - ti,single-shot: This chip has two power modes: single-shot (chip takes one + measurement and then shuts itself down) and continuous ( + chip takes continuous measurements). The continuous mode is -+ more reliable and suitable for hardware monitor type -device, ++ more reliable and suitable for hardware monitor type device, + but the single-shot mode is more power-friendly and useful + for battery-powered device which cares power consumptions + while still needs some measurements occasionally. diff --git a/a/content_digest b/N1/content_digest index 3e5b8ec..7657dd6 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,14 @@ "ref\020190105004904.17947-1-nicoleotsuka@gmail.com\0" "From\0Nicolin Chen <nicoleotsuka@gmail.com>\0" "Subject\0[PATCH 1/2] dt-bindings: hwmon: ina3221: Add ti,single-shot property\0" - "Date\0Fri, 04 Jan 2019 16:50:38 -0800\0" - "To\0linux-hwmon@vger.kernel.org\0" + "Date\0Fri, 4 Jan 2019 16:49:03 -0800\0" + "To\0jdelvare@suse.com" + linux@roeck-us.net + robh+dt@kernel.org + " mark.rutland@arm.com\0" + "Cc\0linux-hwmon@vger.kernel.org" + devicetree@vger.kernel.org + " linux-kernel@vger.kernel.org\0" "\00:1\0" "b\0" "By default, ina3221, as a hardware monitor, continuously measures\n" @@ -12,13 +18,12 @@ "This patch adds a \"ti,single-shot\" property to allow changing the\n" "default continuous mode to single-shot operating mode.\n" "\n" - "Signed-off-by: Nicolin Chen <nicoleots...@gmail.com>\n" + "Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>\n" "---\n" " Documentation/devicetree/bindings/hwmon/ina3221.txt | 10 ++++++++++\n" " 1 file changed, 10 insertions(+)\n" "\n" - "diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt \n" - "b/Documentation/devicetree/bindings/hwmon/ina3221.txt\n" + "diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt\n" "index a7b25caa2b8e..fa63b6171407 100644\n" "--- a/Documentation/devicetree/bindings/hwmon/ina3221.txt\n" "+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt\n" @@ -29,8 +34,7 @@ "+ - ti,single-shot: This chip has two power modes: single-shot (chip takes one\n" "+ measurement and then shuts itself down) and continuous (\n" "+ chip takes continuous measurements). The continuous mode is\n" - "+ more reliable and suitable for hardware monitor type \n" - "device,\n" + "+ more reliable and suitable for hardware monitor type device,\n" "+ but the single-shot mode is more power-friendly and useful\n" "+ for battery-powered device which cares power consumptions\n" "+ while still needs some measurements occasionally.\n" @@ -43,4 +47,4 @@ "-- \n" 2.17.1 -e07e5097feca7ab16cda3b6d35ff674ff5b647c9c19abe22c6404d1f977ad248 +3863c8c729e2099587d5927e90f5b00b016df00330c69a217dda1ceaad7c5bf8
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox