[PATCH 1/2] dt-bindings: mfd: gateworks-gsc: add 16bit pre-scaled voltage mode

Tim Harvey
2020-06-09T14:57:41Z

add a 16-bit pre-scaled voltage mode to adc and clarify that existing
pre-scaled mode is 24bit.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index 487a844..ceec33f 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -79,11 +79,12 @@ properties:
description: |
conversion mode:
0 - temperature, in C*10
- 1 - pre-scaled voltage value
+ 1 - pre-scaled 24-bit voltage value
2 - scaled voltage based on an optional resistor divider
and optional offset
+ 3 - pre-scaled 16-bit voltage value
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
+ enum: [0, 1, 2, 3]

gw,voltage-divider-ohms:
description: Values of resistors for divider on raw ADC input
--
2.7.4