[PATCH 0/6] RFC: hwmon: few improvements to amd_energy driver

[Naveen Krishna Chatradhi <nchatrad@amd.com>]

Hi Guenter,

Would like to know your feedback on the following features
for the amd_energy driver.

1) Sysfs entry for dumping energy counters of all the cores
    - On latest CPUs there can be as many as 128 cores.
      An ABI for dumping all 128 counters using seq_printf()
      to a debugfs/sysfs file would save a lot of cycles.

2) Enable/Disable the accumulation, Disabled by default
    - The accumulator thread may introduce some noise.
      Providing a knob to enable/disable (start/stop) the
      accumulation in software.

3) Accumulator Interval change based on reported resolution
    - Frequency of the accumulator thread can be set during
      the probe based on fine grain (1.625 micro J) or course
      grain (0.125 milli J) resolutions.

Akshay Gupta (1):
  hwmon: amd_energy: Move label out of accumulation structure

Naveen Krishna Chatradhi (5):
  hwmon: amd_energy: optimize accumulation interval
  hwmon: amd_energy: Improve the accumulation logic
  hwmon: amd_energy: let user enable/disable the sw accumulation
  hwmon: amd_energy: dump energy counters via debugfs
  hwmon: (amd_energy) Update driver documentation

 Documentation/hwmon/amd_energy.rst |  19 ++
 drivers/hwmon/amd_energy.c         | 351 +++++++++++++++++++++--------
 2 files changed, 273 insertions(+), 97 deletions(-)

-- 
2.26.2