[PATCH AUTOSEL 5.4 11/11] hwmon: (pwm-fan) Fix RPM calculation

[Sasha Levin <sashal@kernel.org>]

From: Paul Barker <pbarker@konsulko.com>

[ Upstream commit fd8feec665fef840277515a5c2b9b7c3e3970fad ]

To convert the number of pulses counted into an RPM estimation, we need
to divide by the width of our measurement interval instead of
multiplying by it. If the width of the measurement interval is zero we
don't update the RPM value to avoid dividing by zero.

We also don't need to do 64-bit division, with 32-bits we can handle a
fan running at over 4 million RPM.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Link: https://lore.kernel.org/r/20201111164643.7087-1-pbarker@konsulko.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/pwm-fan.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 42ffd2e5182d5..c88ce77fe6763 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -54,16 +54,18 @@ static irqreturn_t pulse_handler(int irq, void *dev_id)
 static void sample_timer(struct timer_list *t)
 {
 	struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer);
+	unsigned int delta = ktime_ms_delta(ktime_get(), ctx->sample_start);
 	int pulses;
-	u64 tmp;
 
-	pulses = atomic_read(&ctx->pulses);
-	atomic_sub(pulses, &ctx->pulses);
-	tmp = (u64)pulses * ktime_ms_delta(ktime_get(), ctx->sample_start) * 60;
-	do_div(tmp, ctx->pulses_per_revolution * 1000);
-	ctx->rpm = tmp;
+	if (delta) {
+		pulses = atomic_read(&ctx->pulses);
+		atomic_sub(pulses, &ctx->pulses);
+		ctx->rpm = (unsigned int)(pulses * 1000 * 60) /
+			(ctx->pulses_per_revolution * delta);
+
+		ctx->sample_start = ktime_get();
+	}
 
-	ctx->sample_start = ktime_get();
 	mod_timer(&ctx->rpm_timer, jiffies + HZ);
 }
 
-- 
2.27.0