public inbox for linux-hwmon@vger.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Charles <hsu.yungteng@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	alan@redhat.com
Subject: Re: [PATCH v4] hwmon: Add driver for STMicroelectronics PM6764 Voltage Regulator
Date: Sun, 22 Nov 2020 07:36:18 -0800	[thread overview]
Message-ID: <20201122153618.GA21246@roeck-us.net> (raw)
In-Reply-To: <35937351-f5ba-f019-c173-17f42c36da54@gmail.com>

On Wed, Nov 11, 2020 at 03:10:08PM +0800, Charles wrote:
> Add the pmbus driver for the STMicroelectronics pm6764 voltage regulator.
> 
> the output voltage use the MFR_READ_VOUT 0xD4
> vout value returned is linear11
> 
> Signed-off-by: Charles Hsu <hsu.yungteng@gmail.com>

Please fix all checkpatch errors and warnings before resubmitting,
and make sure that your e-mail agent does not corrupt the patch.

Guenter

> ---
> 
> v4:
>   - Add pm6764tr to Documentation/hwmon/index.rst.
> v3:
>   - Add Documentation(Documentation/hwmon/pm6764tr.rst).
>   - Fix include order.
> v2:
>   - Fix formatting.
>   - Remove pmbus_do_remove.
>   - Change from .probe to .probe_new.
> v1:
>   - Initial patchset.
> ---
> 
>   Documentation/hwmon/index.rst    |  1 +
>   Documentation/hwmon/pm6764tr.rst | 33 ++++++++++++++
>   drivers/hwmon/pmbus/Kconfig      |  9 ++++
>   drivers/hwmon/pmbus/Makefile     |  1 +
>   drivers/hwmon/pmbus/pm6764tr.c   | 78 ++++++++++++++++++++++++++++++++
>   5 files changed, 122 insertions(+)
>   create mode 100644 Documentation/hwmon/pm6764tr.rst
>   create mode 100644 drivers/hwmon/pmbus/pm6764tr.c
> 
> +MODULE_DESCRIPTION("PMBus driver for  ST PM6764TR");
> +MODULE_LICENSE("GPL");
> 
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index b797db738225..1bbd05e41de4 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -144,6 +144,7 @@ Hardware Monitoring Kernel Drivers
>      pc87360
>      pc87427
>      pcf8591
> +   pm6764tr
>      pmbus
>      powr1220
>      pxe1610
> diff --git a/Documentation/hwmon/pm6764tr.rst 
> b/Documentation/hwmon/pm6764tr.rst
> new file mode 100644
> index 000000000000..5e8092e39297
> --- /dev/null
> +++ b/Documentation/hwmon/pm6764tr.rst
> @@ -0,0 +1,33 @@
> +.. SPDX-License-Identifier: GPL-2.0-only
> +
> +Kernel driver pm6764tr
> +======================
> +
> +Supported chips:
> +
> +  * ST PM6764TR
> +
> +    Prefix: 'pm6764tr'
> +
> +    Addresses scanned: -
> +
> +    Datasheet: http://www.st.com/resource/en/data_brief/pm6764.pdf
> +
> +Authors:
> +    <hsu.yungteng@gmail.com>
> +
> +Description:
> +------------
> +
> +This driver supports the STMicroelectronics PM6764TR chip. The PM6764TR 
> is a high
> +performance digital controller designed to power Intel’s VR12.5 
> processors and memories.
> +
> +The device utilizes digital technology to implement all control and 
> power management
> +functions to provide maximum flexibility and performance. The NVM is 
> embedded to store
> +custom configurations. The PM6764TR device features up to 4-phase 
> programmable operation.
> +
> +The PM6764TR supports power state transitions featuring VFDE, and 
> programmable DPM
> +maintaining the best efficiency over all loading conditions without 
> compromising transient
> +response. The device assures fast and independent protectionagainstload 
> overcurrent,
> +under/overvoltage and feedback disconnections.
> +
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index a25faf69fce3..9c846facce9f 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -220,6 +220,15 @@ config SENSORS_MP2975
>         This driver can also be built as a module. If so, the module will
>         be called mp2975.
> 
> +config SENSORS_PM6764TR
> +    tristate "ST PM6764TR"
> +    help
> +      If you say yes here you get hardware monitoring support for ST
> +      PM6764TR.
> +
> +      This driver can also be built as a module. If so, the module will
> +      be called pm6764tr.
> +
>   config SENSORS_PXE1610
>       tristate "Infineon PXE1610"
>       help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 4c97ad0bd791..31ebdef5d4a6 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_MAX31785)    += max31785.o
>   obj-$(CONFIG_SENSORS_MAX34440)    += max34440.o
>   obj-$(CONFIG_SENSORS_MAX8688)    += max8688.o
>   obj-$(CONFIG_SENSORS_MP2975)    += mp2975.o
> +obj-$(CONFIG_SENSORS_PM6764TR)    += pm6764tr.o
>   obj-$(CONFIG_SENSORS_PXE1610)    += pxe1610.o
>   obj-$(CONFIG_SENSORS_TPS40422)    += tps40422.o
>   obj-$(CONFIG_SENSORS_TPS53679)    += tps53679.o
> diff --git a/drivers/hwmon/pmbus/pm6764tr.c b/drivers/hwmon/pmbus/pm6764tr.c
> new file mode 100644
> index 000000000000..2ab68036bb0c
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/pm6764tr.c
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for STMicroelectronics digital controller 
> PM6764TR
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/pmbus.h>
> +#include <linux/slab.h>
> +#include "pmbus.h"
> +
> +#define PM6764TR_PMBUS_READ_VOUT    0xD4
> +
> +static int pm6764tr_read_word_data(struct i2c_client *client, int page, 
> int reg)
> +{
> +    int ret;
> +
> +    switch (reg) {
> +    case PMBUS_VIRT_READ_VMON:
> +        ret = pmbus_read_word_data(client, page, PM6764TR_PMBUS_READ_VOUT);
> +        break;
> +    default:
> +        ret = -ENODATA;
> +        break;
> +    }
> +    return ret;
> +}
> +
> +static struct pmbus_driver_info pm6764tr_info = {
> +    .pages = 1,
> +    .format[PSC_VOLTAGE_IN] = linear,
> +    .format[PSC_VOLTAGE_OUT] = vid,
> +    .format[PSC_TEMPERATURE] = linear,
> +    .format[PSC_CURRENT_OUT] = linear,
> +    .format[PSC_POWER] = linear,
> +    .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |  PMBUS_HAVE_PIN |
> +        PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | PMBUS_HAVE_VMON |
> +        PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_VOUT |
> +        PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
> +    .read_word_data = pm6764tr_read_word_data,
> +};
> +
> +static int pm6764tr_probe(struct i2c_client *client,
> +              const struct i2c_device_id *id)
> +{
> +    return pmbus_do_probe(client, id, &pm6764tr_info);
> +}
> +
> +static const struct i2c_device_id pm6764tr_id[] = {
> +    {"pm6764tr", 0},
> +    {}
> +};
> +MODULE_DEVICE_TABLE(i2c, pm6764tr_id);
> +
> +static const struct of_device_id pm6764tr_of_match[] = {
> +    {.compatible = "pm6764tr"},
> +    {}
> +};
> +
> +/* This is the driver that will be inserted */
> +static struct i2c_driver pm6764tr_driver = {
> +    .driver = {
> +           .name = "pm6764tr",
> +           .of_match_table = of_match_ptr(pm6764tr_of_match),
> +           },
> +    .probe_new = pm6764tr_probe,
> +    .id_table = pm6764tr_id,
> +};
> +
> +module_i2c_driver(pm6764tr_driver);
> +
> +MODULE_AUTHOR("Charles Hsu");

  reply	other threads:[~2020-11-22 15:36 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-11  7:10 [PATCH v4] hwmon: Add driver for STMicroelectronics PM6764 Voltage Regulator Charles
2020-11-22 15:36 ` Guenter Roeck [this message]
2020-11-26  0:50   ` Charles
2020-11-26  1:29     ` Guenter Roeck
     [not found] <859f2714-cedc-0342-4d10-789abd8d2c52@gmail.com>
2020-11-26  1:39 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201122153618.GA21246@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=alan@redhat.com \
    --cc=hsu.yungteng@gmail.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox