From: Guenter Roeck <linux@roeck-us.net>
To: David Bartley <andareed@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Subject: Re: [PATCH v2] hwmon: (nct6683) Support NCT6687D.
Date: Tue, 1 Dec 2020 19:10:25 -0800 [thread overview]
Message-ID: <20201202031025.GA19647@roeck-us.net> (raw)
In-Reply-To: <20201202025057.5492-1-andareed@gmail.com>
On Tue, Dec 01, 2020 at 06:50:57PM -0800, David Bartley wrote:
> This is found on many MSI motherboards.
>
> Signed-off-by: David Bartley <andareed@gmail.com>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> Documentation/hwmon/nct6683.rst | 3 ++-
> drivers/hwmon/nct6683.c | 14 ++++++++++++--
> 2 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/hwmon/nct6683.rst b/Documentation/hwmon/nct6683.rst
> index efbf7e9703ec..8646ad519fcd 100644
> --- a/Documentation/hwmon/nct6683.rst
> +++ b/Documentation/hwmon/nct6683.rst
> @@ -3,7 +3,7 @@ Kernel driver nct6683
>
> Supported chips:
>
> - * Nuvoton NCT6683D
> + * Nuvoton NCT6683D/NCT6687D
>
> Prefix: 'nct6683'
>
> @@ -61,4 +61,5 @@ Board Firmware version
> Intel DH87RL NCT6683D EC firmware version 1.0 build 04/03/13
> Intel DH87MC NCT6683D EC firmware version 1.0 build 04/03/13
> Intel DB85FL NCT6683D EC firmware version 1.0 build 04/03/13
> +MSI B550 NCT6687D EC firmware version 1.0 build 05/07/20
> =============== ===============================================
> diff --git a/drivers/hwmon/nct6683.c b/drivers/hwmon/nct6683.c
> index 2d299149f4d2..7f7e30f0de7b 100644
> --- a/drivers/hwmon/nct6683.c
> +++ b/drivers/hwmon/nct6683.c
> @@ -1,7 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-or-later
> /*
> * nct6683 - Driver for the hardware monitoring functionality of
> - * Nuvoton NCT6683D eSIO
> + * Nuvoton NCT6683D/NCT6687D eSIO
> *
> * Copyright (C) 2013 Guenter Roeck <linux@roeck-us.net>
> *
> @@ -12,6 +12,7 @@
> *
> * Chip #vin #fan #pwm #temp chip ID
> * nct6683d 21(1) 16 8 32(1) 0xc730
> + * nct6687d 21(1) 16 8 32(1) 0xd590
> *
> * Notes:
> * (1) Total number of vin and temp inputs is 32.
> @@ -32,7 +33,7 @@
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> -enum kinds { nct6683 };
> +enum kinds { nct6683, nct6687 };
>
> static bool force;
> module_param(force, bool, 0);
> @@ -40,10 +41,12 @@ MODULE_PARM_DESC(force, "Set to one to enable support for unknown vendors");
>
> static const char * const nct6683_device_names[] = {
> "nct6683",
> + "nct6687",
> };
>
> static const char * const nct6683_chip_names[] = {
> "NCT6683D",
> + "NCT6687D",
> };
>
> #define DRVNAME "nct6683"
> @@ -63,6 +66,7 @@ static const char * const nct6683_chip_names[] = {
>
> #define SIO_NCT6681_ID 0xb270 /* for later */
> #define SIO_NCT6683_ID 0xc730
> +#define SIO_NCT6687_ID 0xd590
> #define SIO_ID_MASK 0xFFF0
>
> static inline void
> @@ -164,6 +168,7 @@ superio_exit(int ioreg)
> #define NCT6683_REG_CUSTOMER_ID 0x602
> #define NCT6683_CUSTOMER_ID_INTEL 0x805
> #define NCT6683_CUSTOMER_ID_MITAC 0xa0e
> +#define NCT6683_CUSTOMER_ID_MSI 0x201
>
> #define NCT6683_REG_BUILD_YEAR 0x604
> #define NCT6683_REG_BUILD_MONTH 0x605
> @@ -1218,6 +1223,8 @@ static int nct6683_probe(struct platform_device *pdev)
> break;
> case NCT6683_CUSTOMER_ID_MITAC:
> break;
> + case NCT6683_CUSTOMER_ID_MSI:
> + break;
> default:
> if (!force)
> return -ENODEV;
> @@ -1352,6 +1359,9 @@ static int __init nct6683_find(int sioaddr, struct nct6683_sio_data *sio_data)
> case SIO_NCT6683_ID:
> sio_data->kind = nct6683;
> break;
> + case SIO_NCT6687_ID:
> + sio_data->kind = nct6687;
> + break;
> default:
> if (val != 0xffff)
> pr_debug("unsupported chip ID: 0x%04x\n", val);
> --
> 2.27.0
>
prev parent reply other threads:[~2020-12-02 3:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAM9zjRMsu68ZePpLJdSSdobCd8Ax51duqgG+LRKjKpsGrc+_ng@mail.gmail.com>
2020-12-02 2:50 ` [PATCH v2] hwmon: (nct6683) Support NCT6687D David Bartley
2020-12-02 3:10 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202031025.GA19647@roeck-us.net \
--to=linux@roeck-us.net \
--cc=andareed@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox