From: Guenter Roeck <linux@roeck-us.net>
To: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Cc: linux-kernel@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
Jonathan Corbet <corbet@lwn.net>,
linux-hwmon@vger.kernel.org
Subject: Re: [PATCH v2] hwmon: corsair-psu: fix suspend behavior
Date: Fri, 4 Jun 2021 04:05:14 -0700 [thread overview]
Message-ID: <20210604110514.GA1445546@roeck-us.net> (raw)
In-Reply-To: <20210604071711.78271072@monster.powergraphx.local>
On Fri, Jun 04, 2021 at 05:17:11AM +0000, Wilken Gottwalt wrote:
> On Thu, 3 Jun 2021 09:05:33 -0700
> Guenter Roeck <linux@roeck-us.net> wrote:
>
> > On Thu, Jun 03, 2021 at 11:51:02AM +0000, Wilken Gottwalt wrote:
> > > During standby some PSUs turn off the microcontroller. A re-init is
> > > required during resume or the microcontroller stays unresponsive.
> > >
> > > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
> > > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
> >
> > Applied.
>
> Thank you. Though I have an odd question. I would like to change the licensing to
> a dual license (GPL/MPL) to support the LibreHardwareMonitor project. They want
> to use my code but use a MPL license. What would be the best way to do this?
Submit a patch which would need an Acked-by: from everyone who contributed
to the driver. As far as I can see, that would be Wan Jiabing
<wanjiabing@vivo.com>, Jack Doan <me@jackdoan.com>, and Colin Ian King
<colin.king@canonical.com>. I would suggest to ask them first if the license
change is ok with them.
Guenter
>
> greetings,
> Will
>
> > Thanks,
> > Guenter
> >
> > > ---
> > > Changes in v2:
> > > - corrected fixes commit
> > > ---
> > > drivers/hwmon/corsair-psu.c | 14 ++++++++++++++
> > > 1 file changed, 14 insertions(+)
> > >
> > > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> > > index 02298b86b57b..731d5117f9f1 100644
> > > --- a/drivers/hwmon/corsair-psu.c
> > > +++ b/drivers/hwmon/corsair-psu.c
> > > @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report
> > > *repo return 0;
> > > }
> > >
> > > +#ifdef CONFIG_PM
> > > +static int corsairpsu_resume(struct hid_device *hdev)
> > > +{
> > > + struct corsairpsu_data *priv = hid_get_drvdata(hdev);
> > > +
> > > + /* some PSUs turn off the microcontroller during standby, so a reinit is required */
> > > + return corsairpsu_init(priv);
> > > +}
> > > +#endif
> > > +
> > > static const struct hid_device_id corsairpsu_idtable[] = {
> > > { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
> > > { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
> > > @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = {
> > > .probe = corsairpsu_probe,
> > > .remove = corsairpsu_remove,
> > > .raw_event = corsairpsu_raw_event,
> > > +#ifdef CONFIG_PM
> > > + .resume = corsairpsu_resume,
> > > + .reset_resume = corsairpsu_resume,
> > > +#endif
> > > };
> > > module_hid_driver(corsairpsu_driver);
> > >
>
next prev parent reply other threads:[~2021-06-04 11:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-03 11:51 [PATCH v2] hwmon: corsair-psu: fix suspend behavior Wilken Gottwalt
2021-06-03 16:05 ` Guenter Roeck
2021-06-04 5:17 ` Wilken Gottwalt
2021-06-04 11:05 ` Guenter Roeck [this message]
2021-06-13 14:06 ` Wilken Gottwalt
2021-06-13 17:42 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210604110514.GA1445546@roeck-us.net \
--to=linux@roeck-us.net \
--cc=corbet@lwn.net \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wilken.gottwalt@posteo.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox