Linux Hardware Monitor development
 help / color / mirror / Atom feed
From: "Mårten Lindahl" <marten.lindahl@axis.com>
To: Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org, kernel@axis.com,
	"Mårten Lindahl" <marten.lindahl@axis.com>
Subject: [PATCH v5 1/4] hwmon: (pmbus) Introduce and use write_byte_data callback
Date: Mon, 2 May 2022 13:13:42 +0200	[thread overview]
Message-ID: <20220502111345.3100970-2-marten.lindahl@axis.com> (raw)
In-Reply-To: <20220502111345.3100970-1-marten.lindahl@axis.com>

Some of the pmbus core functions uses pmbus_write_byte_data, which does
not support driver callbacks for chip specific write operations. This
could potentially influence some specific regulator chips that for
example need a time delay before each data access.

Lets add support for driver callback with _pmbus_write_byte_data.

Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
---
 drivers/hwmon/pmbus/pmbus.h      |  2 ++
 drivers/hwmon/pmbus/pmbus_core.c | 24 +++++++++++++++++++++---
 2 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index e74b6ef070f3..c031a9700ace 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -438,6 +438,8 @@ struct pmbus_driver_info {
 	int (*read_byte_data)(struct i2c_client *client, int page, int reg);
 	int (*read_word_data)(struct i2c_client *client, int page, int phase,
 			      int reg);
+	int (*write_byte_data)(struct i2c_client *client, int page, int reg,
+			      u8 byte);
 	int (*write_word_data)(struct i2c_client *client, int page, int reg,
 			       u16 word);
 	int (*write_byte)(struct i2c_client *client, int page, u8 value);
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index b2618b1d529e..98da2db3f831 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -276,6 +276,24 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
 	return pmbus_write_word_data(client, page, reg, word);
 }
 
+/*
+ * _pmbus_write_byte_data() is similar to pmbus_write_byte_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_write_byte_data(struct i2c_client *client, int page, int reg, u8 value)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->write_byte_data) {
+		status = info->write_byte_data(client, page, reg, value);
+		if (status != -ENODATA)
+			return status;
+	}
+	return pmbus_write_byte_data(client, page, reg, value);
+}
+
 int pmbus_update_fan(struct i2c_client *client, int page, int id,
 		     u8 config, u8 mask, u16 command)
 {
@@ -290,7 +308,7 @@ int pmbus_update_fan(struct i2c_client *client, int page, int id,
 
 	to = (from & ~mask) | (config & mask);
 	if (to != from) {
-		rv = pmbus_write_byte_data(client, page,
+		rv = _pmbus_write_byte_data(client, page,
 					   pmbus_fan_config_registers[id], to);
 		if (rv < 0)
 			return rv;
@@ -397,7 +415,7 @@ int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
 	tmp = (rv & ~mask) | (value & mask);
 
 	if (tmp != rv)
-		rv = pmbus_write_byte_data(client, page, reg, tmp);
+		rv = _pmbus_write_byte_data(client, page, reg, tmp);
 
 	return rv;
 }
@@ -912,7 +930,7 @@ static int pmbus_get_boolean(struct i2c_client *client, struct pmbus_boolean *b,
 
 	regval = status & mask;
 	if (regval) {
-		ret = pmbus_write_byte_data(client, page, reg, regval);
+		ret = _pmbus_write_byte_data(client, page, reg, regval);
 		if (ret)
 			goto unlock;
 	}
-- 
2.30.2


  reply	other threads:[~2022-05-02 11:13 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-02 11:13 [PATCH v5 0/4] hwmon: (pmbus/ltc2978) Add regulator ops Mårten Lindahl
2022-05-02 11:13 ` Mårten Lindahl [this message]
2022-05-02 11:13 ` [PATCH v5 2/4] hwmon: (pmbus) Use _pmbus_read_byte_data with callback Mårten Lindahl
2022-05-02 11:13 ` [PATCH v5 3/4] hwmon: (pmbus/ltc2978) Add chip specific write_byte_data Mårten Lindahl
2022-05-02 11:13 ` [PATCH v5 4/4] hwmon: (pmbus) Add get_voltage/set_voltage ops Mårten Lindahl
2022-05-02 16:48   ` Guenter Roeck
2022-05-03 10:14     ` Marten Lindahl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220502111345.3100970-2-marten.lindahl@axis.com \
    --to=marten.lindahl@axis.com \
    --cc=jdelvare@suse.com \
    --cc=kernel@axis.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox