From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
Slawomir Stepien <sst@poczta.fm>,
Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 00/40] hwmon: (lm90) Various improvements to lm90 driver
Date: Wed, 25 May 2022 06:56:29 -0700 [thread overview]
Message-ID: <20220525135709.2899592-1-linux@roeck-us.net> (raw)
This patch series implements various improvements to the lm90 driver.
- Generate sysfs and udev events for all alarms
- Add support for LM84, ADM1020, ADM1021, ADT7421, ADT7481, ADT7482,
ADT7483A, NCT210, NCT214, NCT218, NCT72, MAX1617, MAX1617A, MAX6642,
NE1617, NE1617A, NE1618, GL523SM, THMC10, and MC1066
- Explicit support for MAX6648
- Handle differences between ADT7461 and ADT7461A
- Individual drivers for ADM1021 and MAX6642 are now obsolete.
- Improved PEC support. Some chips support PEC only in read operations,
others support PEC for both read and write operations.
- Improved alarm handling
- Streamlined temperature conversion functions
- Reorganized and improved chip detection code
----------------------------------------------------------------
Guenter Roeck (40):
hwmon: (lm90) Generate sysfs and udev events for all alarms
hwmon: (lm90) Rework alarm/status handling
hwmon: (lm90) Reorder include files in alphabetical order
hwmon: (lm90) Reorder chip enumeration to be in alphabetical order
hwmon: (lm90) Use BIT macro
hwmon: (lm90) Move status register bit shifts to compile time
hwmon: (lm90) Stop using R_/W_ register prefix
hwmon: (lm90) Improve PEC support
hwmon: (lm90) Add partial PEC support for ADT7461
hwmon: (lm90) Enable full PEC support for ADT7461A
hwmon: (lm90) Add support for unsigned and signed temperatures
hwmon: (lm90) Only re-read registers if volatile
hwmon: (lm90) Support multiple temperature resolutions
hwmon: (lm90) Use single flag to indicate extended temperature support
hwmon: (lm90) Rework detect function
hwmon: (lm90) Add support for additional chip revision of NCT1008
hwmon: (lm90) Fix/Add detection of G781-1
hwmon: (lm90) Add flag to indicate 'alarms' attribute support
hwmon: (lm90) Add explicit support for MAX6648/MAX6692
hwmon: (lm90) Add support for ADT7481, ADT7482, and ADT7483
hwmon: (lm90) Strengthen chip detection for ADM1032, ADT7461(A), and NCT1008
hwmon: (lm90) Add support for MAX6690
hwmon: (lm90) Add flag to indicate support for minimum temperature limits
hwmon: (lm90) Add flag to indicate conversion rate support
hwmon: (lm90) Add support for MAX6642
hwmon: (lm90) Let lm90_read16() handle 8-bit read operations
hwmon: (lm90) Introduce 16-bit register write function
hwmon: (lm90) Support MAX1617 and LM84
hwmon: (lm90) Add support for ADM1021, ADM1021A, and ADM1023
hwmon: (lm90) Add remaining chips supported by adm1021 driver
hwmon: (lm90) Combine lm86 and lm90 configuration
hwmon: (lm90) Add explicit support for NCT210
hwmon: (lm90) Add support for ON Semiconductor NCT214 and NCT72
hwmon: (lm90) Add support for ON Semiconductor NCT218
hwmon: (lm90) Add support for ADT7421
hwmon: (lm90) Only disable alerts if not already disabled
hwmon: (lm90) Add explicit support for ADM1020
hwmon: (lm90) Add support and detection of Philips/NXP NE1618
hwmon: (lm90) Add table with supported Analog/ONSEMI devices
hwmon: (lm90) Support temp_samples attribute
Documentation/hwmon/lm90.rst | 233 +++-
drivers/hwmon/Kconfig | 17 +-
drivers/hwmon/lm90.c | 2415 ++++++++++++++++++++++++++++--------------
3 files changed, 1832 insertions(+), 833 deletions(-)
next reply other threads:[~2022-05-25 14:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-25 13:56 Guenter Roeck [this message]
2022-05-25 13:56 ` [PATCH 01/40] hwmon: (lm90) Generate sysfs and udev events for all alarms Guenter Roeck
2022-05-25 13:56 ` [PATCH 02/40] hwmon: (lm90) Rework alarm/status handling Guenter Roeck
2022-05-25 13:56 ` [PATCH 03/40] hwmon: (lm90) Reorder include files in alphabetical order Guenter Roeck
2022-05-25 13:56 ` [PATCH 04/40] hwmon: (lm90) Reorder chip enumeration to be " Guenter Roeck
2022-05-25 13:56 ` [PATCH 05/40] hwmon: (lm90) Use BIT macro Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2022-05-25 13:57 [PATCH 00/40] hwmon: (lm90) Various improvements to lm90 driver Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220525135709.2899592-1-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sst@poczta.fm \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox