[PATCH 1/6] hwmon: (lm95245) Use multi-byte regmap operations

Linux Hardware Monitor development
 help / color / mirror / Atom feed

From: Guenter Roeck <linux@roeck-us.net>
To: Hardware Monitoring <linux-hwmon@vger.kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 1/6] hwmon: (lm95245) Use multi-byte regmap operations
Date: Tue, 16 Jul 2024 16:00:45 -0700	[thread overview]
Message-ID: <20240716230050.2049534-2-linux@roeck-us.net> (raw)
In-Reply-To: <20240716230050.2049534-1-linux@roeck-us.net>

Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.

No functional change.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/lm95245.c | 110 ++++++++++++++++------------------------
 1 file changed, 45 insertions(+), 65 deletions(-)

diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c
index d293b4f15dc1..3bdc30530847 100644
--- a/drivers/hwmon/lm95245.c
+++ b/drivers/hwmon/lm95245.c
@@ -161,18 +161,18 @@ static int lm95245_read_temp(struct device *dev, u32 attr, int channel,
 {
 	struct lm95245_data *data = dev_get_drvdata(dev);
 	struct regmap *regmap = data->regmap;
-	int ret, regl, regh, regvall, regvalh;
+	unsigned int regs[2];
+	unsigned int regval;
+	u8 regvals[2];
+	int ret;
 
 	switch (attr) {
 	case hwmon_temp_input:
-		regl = channel ? LM95245_REG_R_REMOTE_TEMPL_S :
-				 LM95245_REG_R_LOCAL_TEMPL_S;
-		regh = channel ? LM95245_REG_R_REMOTE_TEMPH_S :
-				 LM95245_REG_R_LOCAL_TEMPH_S;
-		ret = regmap_read(regmap, regl, &regvall);
-		if (ret < 0)
-			return ret;
-		ret = regmap_read(regmap, regh, &regvalh);
+		regs[0] = channel ? LM95245_REG_R_REMOTE_TEMPL_S :
+				    LM95245_REG_R_LOCAL_TEMPL_S;
+		regs[1] = channel ? LM95245_REG_R_REMOTE_TEMPH_S :
+				    LM95245_REG_R_LOCAL_TEMPH_S;
+		ret = regmap_multi_reg_read(regmap, regs, regvals, 2);
 		if (ret < 0)
 			return ret;
 		/*
@@ -181,92 +181,77 @@ static int lm95245_read_temp(struct device *dev, u32 attr, int channel,
 		 * Use signed calculation for remote if signed bit is set
 		 * or if reported temperature is below signed limit.
 		 */
-		if (!channel || (regvalh & 0x80) || regvalh < 0x7f) {
-			*val = temp_from_reg_signed(regvalh, regvall);
+		if (!channel || (regvals[1] & 0x80) || regvals[1] < 0x7f) {
+			*val = temp_from_reg_signed(regvals[1], regvals[0]);
 			return 0;
 		}
-		ret = regmap_read(regmap, LM95245_REG_R_REMOTE_TEMPL_U,
-				  &regvall);
-		if (ret < 0)
+		ret = regmap_bulk_read(regmap, LM95245_REG_R_REMOTE_TEMPH_U, regvals, 2);
+		if (ret)
 			return ret;
-		ret = regmap_read(regmap, LM95245_REG_R_REMOTE_TEMPH_U,
-				  &regvalh);
-		if (ret < 0)
-			return ret;
-		*val = temp_from_reg_unsigned(regvalh, regvall);
+		*val = temp_from_reg_unsigned(regvals[0], regvals[1]);
 		return 0;
 	case hwmon_temp_max:
 		ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT,
-				  &regvalh);
+				  &regval);
 		if (ret < 0)
 			return ret;
-		*val = regvalh * 1000;
+		*val = regval * 1000;
 		return 0;
 	case hwmon_temp_crit:
-		regh = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
-				 LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
-		ret = regmap_read(regmap, regh, &regvalh);
+		regs[0] = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
+				    LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
+		ret = regmap_read(regmap, regs[0], &regval);
 		if (ret < 0)
 			return ret;
-		*val = regvalh * 1000;
+		*val = regval * 1000;
 		return 0;
 	case hwmon_temp_max_hyst:
-		ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT,
-				  &regvalh);
+		regs[0] = LM95245_REG_RW_REMOTE_OS_LIMIT;
+		regs[1] = LM95245_REG_RW_COMMON_HYSTERESIS;
+		ret = regmap_multi_reg_read(regmap, regs, regvals, 2);
 		if (ret < 0)
 			return ret;
-		ret = regmap_read(regmap, LM95245_REG_RW_COMMON_HYSTERESIS,
-				  &regvall);
-		if (ret < 0)
-			return ret;
-		*val = (regvalh - regvall) * 1000;
+		*val = (regvals[0] - regvals[1]) * 1000;
 		return 0;
 	case hwmon_temp_crit_hyst:
-		regh = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
-				 LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
-		ret = regmap_read(regmap, regh, &regvalh);
+		regs[0] = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
+				    LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
+		regs[1] = LM95245_REG_RW_COMMON_HYSTERESIS;
+
+		ret = regmap_multi_reg_read(regmap, regs, regvals, 2);
 		if (ret < 0)
 			return ret;
-		ret = regmap_read(regmap, LM95245_REG_RW_COMMON_HYSTERESIS,
-				  &regvall);
-		if (ret < 0)
-			return ret;
-		*val = (regvalh - regvall) * 1000;
+		*val = (regvals[0] - regvals[1]) * 1000;
 		return 0;
 	case hwmon_temp_type:
-		ret = regmap_read(regmap, LM95245_REG_RW_CONFIG2, &regvalh);
+		ret = regmap_read(regmap, LM95245_REG_RW_CONFIG2, &regval);
 		if (ret < 0)
 			return ret;
-		*val = (regvalh & CFG2_REMOTE_TT) ? 1 : 2;
+		*val = (regval & CFG2_REMOTE_TT) ? 1 : 2;
 		return 0;
 	case hwmon_temp_offset:
-		ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OFFL,
-				  &regvall);
+		ret = regmap_bulk_read(regmap, LM95245_REG_RW_REMOTE_OFFH, regvals, 2);
 		if (ret < 0)
 			return ret;
-		ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OFFH,
-				  &regvalh);
-		if (ret < 0)
-			return ret;
-		*val = temp_from_reg_signed(regvalh, regvall);
+		*val = temp_from_reg_signed(regvals[0], regvals[1]);
 		return 0;
 	case hwmon_temp_max_alarm:
-		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regvalh);
+		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regval);
 		if (ret < 0)
 			return ret;
-		*val = !!(regvalh & STATUS1_ROS);
+		*val = !!(regval & STATUS1_ROS);
 		return 0;
 	case hwmon_temp_crit_alarm:
-		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regvalh);
+		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regval);
 		if (ret < 0)
 			return ret;
-		*val = !!(regvalh & (channel ? STATUS1_RTCRIT : STATUS1_LOC));
+		*val = !!(regval & (channel ? STATUS1_RTCRIT : STATUS1_LOC));
 		return 0;
 	case hwmon_temp_fault:
-		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regvalh);
+		ret = regmap_read(regmap, LM95245_REG_R_STATUS1, &regval);
 		if (ret < 0)
 			return ret;
-		*val = !!(regvalh & STATUS1_DIODE_FAULT);
+		*val = !!(regval & STATUS1_DIODE_FAULT);
 		return 0;
 	default:
 		return -EOPNOTSUPP;
@@ -279,6 +264,7 @@ static int lm95245_write_temp(struct device *dev, u32 attr, int channel,
 	struct lm95245_data *data = dev_get_drvdata(dev);
 	struct regmap *regmap = data->regmap;
 	unsigned int regval;
+	u8 regvals[2];
 	int ret, reg;
 
 	switch (attr) {
@@ -311,16 +297,10 @@ static int lm95245_write_temp(struct device *dev, u32 attr, int channel,
 	case hwmon_temp_offset:
 		val = clamp_val(val, -128000, 127875);
 		val = val * 256 / 1000;
-		mutex_lock(&data->update_lock);
-		ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OFFL,
-				   val & 0xe0);
-		if (ret < 0) {
-			mutex_unlock(&data->update_lock);
-			return ret;
-		}
-		ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OFFH,
-				   (val >> 8) & 0xff);
-		mutex_unlock(&data->update_lock);
+		regvals[0] = val >> 8;
+		regvals[1] = val & 0xe0;
+
+		ret = regmap_bulk_write(regmap, LM95245_REG_RW_REMOTE_OFFH, regvals, 2);
 		return ret;
 	case hwmon_temp_type:
 		if (val != 1 && val != 2)
-- 
2.39.2

next prev parent reply	other threads:[~2024-07-16 23:00 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-16 23:00 [PATCH 0/6] hwmon: Use multi-byte regmap operations Guenter Roeck
2024-07-16 23:00 ` Guenter Roeck [this message]
2024-07-17 13:33   ` [PATCH 1/6] hwmon: (lm95245) " Tzung-Bi Shih
2024-07-16 23:00 ` [PATCH 2/6] hwmon: (nct7802) " Guenter Roeck
2024-07-17 13:35   ` Tzung-Bi Shih
2024-07-16 23:00 ` [PATCH 3/6] hwmon: (adt7x10) " Guenter Roeck
2024-07-17 13:35   ` Tzung-Bi Shih
2024-07-16 23:00 ` [PATCH 4/6] hwmon: (tmp464) " Guenter Roeck
2024-07-17 13:35   ` Tzung-Bi Shih
2024-07-17 14:37     ` Guenter Roeck
2024-07-18  1:29       ` Tzung-Bi Shih
2024-07-16 23:00 ` [PATCH 5/6] hwmon: (max6639) " Guenter Roeck
2024-07-17 13:36   ` Tzung-Bi Shih
2024-07-17 17:14     ` Guenter Roeck
2024-07-18  1:28       ` Tzung-Bi Shih
2024-07-18  2:27         ` Guenter Roeck
2024-07-16 23:00 ` [PATCH 6/6] hwmon: (amc6821) " Guenter Roeck
2024-07-17 13:36   ` Tzung-Bi Shih

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:d293b4f15dc dfblob:3bdc3053084 )
 OR (
bs:"[PATCH 1/6] hwmon: (lm95245) Use multi-byte regmap operations" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240716230050.2049534-2-linux@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=linux-hwmon@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox