Linux Hardware Monitor development
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Jerome Brunet <jbrunet@baylibre.com>,
	 Jonathan Corbet <corbet@lwn.net>,
	 Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	 linux-i2c@vger.kernel.org
Subject: [PATCH 0/3] hwmon: pmbus: add tps25990 efuse support
Date: Mon, 09 Sep 2024 17:39:02 +0200	[thread overview]
Message-ID: <20240909-tps25990-v1-0-39b37e43e795@baylibre.com> (raw)

This patchset adds initial support for the Texas Instruments TPS25990
eFuse. The TPS25990 is an integrated, high-current circuit protection and
power management device. TPS25895 may be stacked on the TPS25990 for
higher currents.

This patchset provides basic telemetry support for the device.
On boot, the device is write protected. Limits can be changed in sysfs
after removing the write protection, through debugfs. Limits will be
restored to the default value device on startup, unless saved to NVM.
Writing the NVM is not supported by the driver at the moment.

---
Jerome Brunet (3):
      dt-bindings: hwmon: pmbus: add ti tps25990 documentation
      hwmon: (pmbus/core) add POWER_GOOD signal limits support
      hwmon: (pmbus/tps25990): add initial support

 .../bindings/hwmon/pmbus/ti,tps25990.yaml          |  73 ++++
 Documentation/hwmon/tps25990.rst                   | 141 ++++++
 drivers/hwmon/pmbus/Kconfig                        |  17 +
 drivers/hwmon/pmbus/Makefile                       |   1 +
 drivers/hwmon/pmbus/pmbus.h                        |   3 +
 drivers/hwmon/pmbus/pmbus_core.c                   |   6 +
 drivers/hwmon/pmbus/tps25990.c                     | 474 +++++++++++++++++++++
 7 files changed, 715 insertions(+)
---
base-commit: d22bd451d5606411895ef55cb105277e4f4f6e54
change-id: 20240909-tps25990-34c0cff2be06

Best regards,
-- 
Jerome


             reply	other threads:[~2024-09-09 15:39 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-09 15:39 Jerome Brunet [this message]
2024-09-09 15:39 ` [PATCH 1/3] dt-bindings: hwmon: pmbus: add ti tps25990 documentation Jerome Brunet
2024-09-10  7:48   ` Krzysztof Kozlowski
2024-09-10  9:31     ` Jerome Brunet
2024-09-11 14:45       ` Rob Herring
2024-09-11 17:26         ` Jerome Brunet
2024-09-16  8:45       ` Krzysztof Kozlowski
2024-09-09 15:39 ` [PATCH 2/3] hwmon: (pmbus/core) add POWER_GOOD signal limits support Jerome Brunet
2024-09-09 18:16   ` Guenter Roeck
2024-09-10  6:43     ` Jerome Brunet
2024-09-10 14:37       ` Guenter Roeck
2024-09-10 15:00         ` Jerome Brunet
2024-09-10 16:22           ` Guenter Roeck
2024-09-09 15:39 ` [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support Jerome Brunet
2024-09-09 22:52   ` Guenter Roeck
2024-09-10  9:07     ` Jerome Brunet
2024-09-10 17:07       ` Guenter Roeck
2024-09-11  9:37         ` Jerome Brunet
2024-09-10  8:08   ` kernel test robot
2024-09-10 10:32   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240909-tps25990-v1-0-39b37e43e795@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=Delphine_CC_Chiu@Wiwynn.com \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox