From: Marek Vasut <marex@denx.de>
To: linux-hwmon@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>, Conor Dooley <conor+dt@kernel.org>,
Guenter Roeck <linux@roeck-us.net>,
Jean Delvare <jdelvare@suse.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org
Subject: [PATCH 1/2] dt-bindings: hwmon: pwm-fan: Document start from dead stop properties
Date: Tue, 5 Nov 2024 14:52:15 +0100 [thread overview]
Message-ID: <20241105135259.101126-1-marex@denx.de> (raw)
Delta AFC0612DB-F00 fan has to be set to at least 30% PWM duty cycle
to spin up from a dead stop, and can be afterward throttled down to
lower PWM duty cycle. Introduce support for operating such fans which
need to start at higher PWM duty cycle first and can slow down next.
Document two new DT properties, "fan-dead-stop-start-percent" and
"fan-dead-stop-start-usec". The former describes the minimum percent
of fan RPM at which it will surely spin up from dead stop. This value
can be found in the fan datasheet and can be converted to PWM duty
cycle easily. The "fan-dead-stop-start-usec" describes the minimum
time in microseconds for which the fan has to be set to dead stop
start RPM for the fan to surely spin up.
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
---
Documentation/devicetree/bindings/hwmon/pwm-fan.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
index 4e5abf7580cc6..f1042471b5176 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
@@ -31,6 +31,17 @@ properties:
it must be self resetting edge interrupts.
maxItems: 1
+ fan-dead-stop-start-percent:
+ description:
+ Minimum fan RPM in percent to start from dead stop.
+ minimum: 0
+ maximum: 100
+
+ fan-dead-stop-start-usec:
+ description:
+ Time to wait in microseconds after start from dead stop.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
pulses-per-revolution:
description:
Define the number of pulses per fan revolution for each tachometer
--
2.45.2
next reply other threads:[~2024-11-05 13:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-05 13:52 Marek Vasut [this message]
2024-11-05 13:52 ` [PATCH 2/2] hwmon: (pwm-fan) Introduce start from dead stop handling Marek Vasut
2024-11-05 14:12 ` Guenter Roeck
2024-11-06 3:18 ` kernel test robot
2024-11-06 18:56 ` kernel test robot
2024-11-05 14:11 ` [PATCH 1/2] dt-bindings: hwmon: pwm-fan: Document start from dead stop properties Guenter Roeck
2024-11-05 18:53 ` Marek Vasut
2024-11-06 0:34 ` Guenter Roeck
2024-11-06 1:28 ` Marek Vasut
2024-11-06 1:55 ` Guenter Roeck
2024-11-06 2:17 ` Marek Vasut
2024-11-05 18:18 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241105135259.101126-1-marex@denx.de \
--to=marex@denx.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzk+dt@kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox