[PATCH v2 10/12] hwmon: (oxp-sensors) Adhere to sysfs-class-hwmon and enable pwm on 2

[Antheas Kapenekakis <lkml@antheas.dev>]

Currently, the driver does not adhere to the sysfs-class-hwmon
specification: 0 is used for auto fan control and 1 is used for manual
control. However, it is expected that 0 sets the fan to full speed,
1 sets the fan to manual, and then 2 is used for automatic control.

Therefore, change the sysfs API to reflect this and enable pwm on 2.

As we are breaking the ABI for this driver, rename oxpec to oxp_ec,
reflecting the naming convention used by other drivers, to allow for
a smooth migration in current userspace programs.

Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
---
 drivers/hwmon/oxp-sensors.c | 37 +++++++++++++++++++++++++++++++++----
 1 file changed, 33 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/oxp-sensors.c b/drivers/hwmon/oxp-sensors.c
index a9332312b2b1..b5ba863a762a 100644
--- a/drivers/hwmon/oxp-sensors.c
+++ b/drivers/hwmon/oxp-sensors.c
@@ -934,7 +934,27 @@ static int oxp_platform_read(struct device *dev, enum hwmon_sensor_types type,
 		case hwmon_pwm_input:
 			return oxp_pwm_input_read(val);
 		case hwmon_pwm_enable:
-			return oxp_pwm_read(val);
+			ret = oxp_pwm_read(val);
+			if (ret)
+				return ret;
+
+			/* Check for auto and return 2 */
+			if (!*val) {
+				*val = 2;
+				return 0;
+			}
+
+			/* Return 0 if at full fan speed, 1 otherwise */
+			ret = oxp_pwm_fan_speed(val);
+			if (ret)
+				return ret;
+
+			if (*val == 255)
+				*val = 0;
+			else
+				*val = 1;
+
+			return 0;
 		default:
 			break;
 		}
@@ -948,15 +968,24 @@ static int oxp_platform_read(struct device *dev, enum hwmon_sensor_types type,
 static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type,
 			      u32 attr, int channel, long val)
 {
+	int ret;
+
 	switch (type) {
 	case hwmon_pwm:
 		switch (attr) {
 		case hwmon_pwm_enable:
 			if (val == 1)
 				return oxp_pwm_enable();
-			else if (val == 0)
+			else if (val == 2)
 				return oxp_pwm_disable();
-			return -EINVAL;
+			else if (val != 0)
+				return -EINVAL;
+
+			/* Enable PWM and set to max speed */
+			ret = oxp_pwm_enable();
+			if (ret)
+				return ret;
+			return oxp_pwm_input_write(255);
 		case hwmon_pwm_input:
 			return oxp_pwm_input_write(val);
 		default:
@@ -1021,7 +1050,7 @@ static int oxp_platform_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device *hwdev;
 
-	hwdev = devm_hwmon_device_register_with_info(dev, "oxpec", NULL,
+	hwdev = devm_hwmon_device_register_with_info(dev, "oxp_ec", NULL,
 						     &oxp_ec_chip_info, NULL);
 
 	return PTR_ERR_OR_ZERO(hwdev);
-- 
2.48.1