From: Antheas Kapenekakis <lkml@antheas.dev>
To: platform-driver-x86@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
linux-pm@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>,
Jean Delvare <jdelvare@suse.com>,
Jonathan Corbet <corbet@lwn.net>,
Joaquin Ignacio Aramendia <samsagax@gmail.com>,
Derek J Clark <derekjohn.clark@gmail.com>,
Kevin Greenberg <kdgreenberg234@protonmail.com>,
Joshua Tam <csinaction@pm.me>,
Parth Menon <parthasarathymenon@gmail.com>,
Eileen <eileen@one-netbook.com>,
linux-kernel@vger.kernel.org, sre@kernel.org,
linux@weissschuh.net, ilpo.jarvinen@linux.intel.com,
hdegoede@redhat.com, mario.limonciello@amd.com,
Antheas Kapenekakis <lkml@antheas.dev>
Subject: [PATCH v8 14/14] platform/x86: oxpec: Add charge threshold and behaviour to OneXPlayer
Date: Sat, 22 Mar 2025 11:36:06 +0100 [thread overview]
Message-ID: <20250322103606.680401-15-lkml@antheas.dev> (raw)
In-Reply-To: <20250322103606.680401-1-lkml@antheas.dev>
With the X1 (AMD), OneXPlayer added a charge limit and charge inhibit
feature to their devices. Charge limit allows for choosing an arbitrary
battery charge setpoint in percentages. Charge ihibit allows to instruct
the device to stop charging either when it is awake or always.
This feature was then extended for the F1Pro as well. OneXPlayer also
released BIOS updates for the X1 Mini, X1 (Intel), and F1 devices that
add support for this feature. Therefore, enable it for all F1 and
X1 devices.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
---
drivers/platform/x86/Kconfig | 1 +
drivers/platform/x86/oxpec.c | 160 ++++++++++++++++++++++++++++++++++-
2 files changed, 157 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 82cfc76bc5c9f..f4d993658c01f 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1189,6 +1189,7 @@ config SEL3350_PLATFORM
config OXP_EC
tristate "OneXPlayer EC platform control"
depends on ACPI_EC
+ depends on ACPI_BATTERY
depends on HWMON
depends on X86
help
diff --git a/drivers/platform/x86/oxpec.c b/drivers/platform/x86/oxpec.c
index 0a5b33a842b24..e6ea702006ec5 100644
--- a/drivers/platform/x86/oxpec.c
+++ b/drivers/platform/x86/oxpec.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/processor.h>
+#include <acpi/battery.h>
/* Handle ACPI lock mechanism */
static u32 oxp_mutex;
@@ -60,6 +61,7 @@ enum oxp_board {
};
static enum oxp_board board;
+static struct device *oxp_dev;
/* Fan reading and PWM */
#define OXP_SENSOR_FAN_REG 0x76 /* Fan reading is 2 registers long */
@@ -93,6 +95,23 @@ static enum oxp_board board;
#define OXP_X1_TURBO_LED_OFF 0x01
#define OXP_X1_TURBO_LED_ON 0x02
+/* Battery extension settings */
+#define EC_CHARGE_CONTROL_BEHAVIOURS (BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO) | \
+ BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE) | \
+ BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE_AWAKE))
+
+#define OXP_X1_CHARGE_LIMIT_REG 0xA3 /* X1 charge limit (%) */
+#define OXP_X1_CHARGE_INHIBIT_REG 0xA4 /* X1 bypass charging */
+
+#define OXP_X1_CHARGE_INHIBIT_MASK_AWAKE 0x01
+/*
+ * X1 Mask is 0x0A, OneXFly F1Pro is just 0x02
+ * but the extra bit on the X1 does nothing.
+ */
+#define OXP_X1_CHARGE_INHIBIT_MASK_OFF 0x02
+#define OXP_X1_CHARGE_INHIBIT_MASK_ALWAYS (OXP_X1_CHARGE_INHIBIT_MASK_AWAKE | \
+ OXP_X1_CHARGE_INHIBIT_MASK_OFF)
+
static const struct dmi_system_id dmi_table[] = {
{
.matches = {
@@ -507,6 +526,129 @@ static ssize_t tt_led_show(struct device *dev,
static DEVICE_ATTR_RW(tt_led);
+/* Callbacks for charge behaviour attributes */
+static bool oxp_psy_ext_supported(void)
+{
+ switch (board) {
+ case oxp_x1:
+ case oxp_fly:
+ return true;
+ default:
+ break;
+ }
+ return false;
+}
+
+static int oxp_psy_ext_get_prop(struct power_supply *psy,
+ const struct power_supply_ext *ext,
+ void *data,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ long raw_val;
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+ ret = read_from_ec(OXP_X1_CHARGE_LIMIT_REG, 1, &raw_val);
+ if (ret)
+ return ret;
+ if (raw_val >= 0 && raw_val > 100)
+ return -EINVAL;
+ val->intval = raw_val;
+ return 0;
+ case POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR:
+ ret = read_from_ec(OXP_X1_CHARGE_INHIBIT_REG, 1, &raw_val);
+ if (ret)
+ return ret;
+ if ((raw_val & OXP_X1_CHARGE_INHIBIT_MASK_ALWAYS) ==
+ OXP_X1_CHARGE_INHIBIT_MASK_ALWAYS)
+ val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE;
+ else if ((raw_val & OXP_X1_CHARGE_INHIBIT_MASK_AWAKE) ==
+ OXP_X1_CHARGE_INHIBIT_MASK_AWAKE)
+ val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE_AWAKE;
+ else
+ val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int oxp_psy_ext_set_prop(struct power_supply *psy,
+ const struct power_supply_ext *ext,
+ void *data,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ long raw_val;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+ if (val->intval > 100)
+ return -EINVAL;
+ return write_to_ec(OXP_X1_CHARGE_LIMIT_REG, val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR:
+ switch (val->intval) {
+ case POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO:
+ raw_val = 0;
+ break;
+ case POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE_AWAKE:
+ raw_val = OXP_X1_CHARGE_INHIBIT_MASK_AWAKE;
+ break;
+ case POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE:
+ raw_val = OXP_X1_CHARGE_INHIBIT_MASK_ALWAYS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return write_to_ec(OXP_X1_CHARGE_INHIBIT_REG, raw_val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int oxp_psy_prop_is_writeable(struct power_supply *psy,
+ const struct power_supply_ext *ext,
+ void *data,
+ enum power_supply_property psp)
+{
+ return true;
+}
+
+static const enum power_supply_property oxp_psy_ext_props[] = {
+ POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD,
+};
+
+static const struct power_supply_ext oxp_psy_ext = {
+ .name = "oxp-charge-control",
+ .properties = oxp_psy_ext_props,
+ .num_properties = ARRAY_SIZE(oxp_psy_ext_props),
+ .charge_behaviours = EC_CHARGE_CONTROL_BEHAVIOURS,
+ .get_property = oxp_psy_ext_get_prop,
+ .set_property = oxp_psy_ext_set_prop,
+ .property_is_writeable = oxp_psy_prop_is_writeable,
+};
+
+static int oxp_add_battery(struct power_supply *battery, struct acpi_battery_hook *hook)
+{
+ return power_supply_register_extension(battery, &oxp_psy_ext, oxp_dev, NULL);
+}
+
+static int oxp_remove_battery(struct power_supply *battery, struct acpi_battery_hook *hook)
+{
+ power_supply_unregister_extension(battery, &oxp_psy_ext);
+ return 0;
+}
+
+static struct acpi_battery_hook battery_hook = {
+ .add_battery = oxp_add_battery,
+ .remove_battery = oxp_remove_battery,
+ .name = "OneXPlayer Battery",
+};
+
/* PWM enable/disable functions */
static int oxp_pwm_enable(void)
{
@@ -845,12 +987,22 @@ static const struct hwmon_chip_info oxp_ec_chip_info = {
static int oxp_platform_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device *hwdev;
+ int ret;
+
+ oxp_dev = dev;
+ ret = PTR_ERR_OR_ZERO(devm_hwmon_device_register_with_info(
+ dev, "oxp_ec", NULL, &oxp_ec_chip_info, NULL));
- hwdev = devm_hwmon_device_register_with_info(dev, "oxp_ec", NULL,
- &oxp_ec_chip_info, NULL);
+ if (ret)
+ return ret;
- return PTR_ERR_OR_ZERO(hwdev);
+ if (oxp_psy_ext_supported()) {
+ ret = devm_battery_hook_register(dev, &battery_hook);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static struct platform_driver oxp_platform_driver = {
--
2.48.1
next prev parent reply other threads:[~2025-03-22 10:36 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-22 10:35 [PATCH v8 00/14] hwmon: (oxpsensors) Add devices, features, fix ABI and move to platform/x86 Antheas Kapenekakis
2025-03-22 10:35 ` [PATCH v8 01/14] hwmon: (oxp-sensors) Distinguish the X1 variants Antheas Kapenekakis
2025-04-11 15:30 ` Ilpo Järvinen
2025-03-22 10:35 ` [PATCH v8 02/14] hwmon: (oxp-sensors) Add all OneXFly variants Antheas Kapenekakis
2025-04-11 15:29 ` Ilpo Järvinen
2025-03-22 10:35 ` [PATCH v8 03/14] platform/x86: oxpec: Move hwmon/oxp-sensors to platform/x86 Antheas Kapenekakis
2025-04-11 15:28 ` Ilpo Järvinen
2025-04-12 8:03 ` Antheas Kapenekakis
2025-03-22 10:35 ` [PATCH v8 04/14] ABI: testing: sysfs-class-oxp: add missing documentation Antheas Kapenekakis
2025-03-22 10:35 ` [PATCH v8 05/14] ABI: testing: sysfs-class-oxp: add tt_led attribute documentation Antheas Kapenekakis
2025-04-11 15:23 ` Ilpo Järvinen
2025-03-22 10:35 ` [PATCH v8 06/14] platform/x86: oxpec: Rename ec group to tt_toggle Antheas Kapenekakis
2025-04-11 15:22 ` Ilpo Järvinen
2025-03-22 10:35 ` [PATCH v8 07/14] platform/x86: oxpec: Add turbo led support to X1 devices Antheas Kapenekakis
2025-04-11 15:21 ` Ilpo Järvinen
2025-03-22 10:36 ` [PATCH v8 08/14] platform/x86: oxpec: Move pwm_enable read to its own function Antheas Kapenekakis
2025-04-11 15:16 ` Ilpo Järvinen
2025-03-22 10:36 ` [PATCH v8 09/14] platform/x86: oxpec: Move pwm value read/write to separate functions Antheas Kapenekakis
2025-04-11 15:15 ` Ilpo Järvinen
2025-03-22 10:36 ` [PATCH v8 10/14] platform/x86: oxpec: Move fan speed read to separate function Antheas Kapenekakis
2025-04-11 15:13 ` Ilpo Järvinen
2025-03-22 10:36 ` [PATCH v8 11/14] platform/x86: oxpec: Adhere to sysfs-class-hwmon and enable pwm on 2 Antheas Kapenekakis
2025-04-11 15:13 ` Ilpo Järvinen
2025-04-12 7:59 ` Antheas Kapenekakis
2025-03-22 10:36 ` [PATCH v8 12/14] platform/x86: oxpec: Follow reverse xmas convention for tt_toggle Antheas Kapenekakis
2025-04-11 15:09 ` Ilpo Järvinen
2025-03-22 10:36 ` [PATCH v8 13/14] power: supply: add inhibit-charge-awake to charge_behaviour Antheas Kapenekakis
2025-03-22 10:36 ` Antheas Kapenekakis [this message]
2025-04-11 15:08 ` [PATCH v8 14/14] platform/x86: oxpec: Add charge threshold and behaviour to OneXPlayer Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250322103606.680401-15-lkml@antheas.dev \
--to=lkml@antheas.dev \
--cc=corbet@lwn.net \
--cc=csinaction@pm.me \
--cc=derekjohn.clark@gmail.com \
--cc=eileen@one-netbook.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=kdgreenberg234@protonmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=linux@weissschuh.net \
--cc=mario.limonciello@amd.com \
--cc=parthasarathymenon@gmail.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=samsagax@gmail.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox