From: Eugene Shalygin <eugene.shalygin@gmail.com>
To: eugene.shalygin@gmail.com
Cc: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] hwmon: (asus-ec-sensors) sort sensor definition arrays
Date: Tue, 8 Apr 2025 22:44:57 +0200 [thread overview]
Message-ID: <20250408204505.11412-1-eugene.shalygin@gmail.com> (raw)
The arrays have to be sorted by the sensor register bank and index
because this is what the sensor reading function expects. So sort them
and leave a comment for future contributors.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
---
drivers/hwmon/asus-ec-sensors.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
index 006ced5ab6e6..ec428c5e97d4 100644
--- a/drivers/hwmon/asus-ec-sensors.c
+++ b/drivers/hwmon/asus-ec-sensors.c
@@ -169,7 +169,10 @@ enum board_family {
family_intel_600_series
};
-/* All the known sensors for ASUS EC controllers */
+/* All the known sensors for ASUS EC controllers. These arrays have to be sorted
+ * by the full ((bank << 8) + index) register index (see asus_ec_block_read() as
+ * to why).
+*/
static const struct ec_sensor_info sensors_family_amd_400[] = {
[ec_sensor_temp_chipset] =
EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
@@ -183,10 +186,10 @@ static const struct ec_sensor_info sensors_family_amd_400[] = {
EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
[ec_sensor_in_cpu_core] =
EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2),
- [ec_sensor_fan_cpu_opt] =
- EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc),
[ec_sensor_fan_vrm_hs] =
EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+ [ec_sensor_fan_cpu_opt] =
+ EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc),
[ec_sensor_fan_chipset] =
/* no chipset fans in this generation */
EC_SENSOR("Chipset", hwmon_fan, 0, 0x00, 0x00),
@@ -194,10 +197,10 @@ static const struct ec_sensor_info sensors_family_amd_400[] = {
EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xb4),
[ec_sensor_curr_cpu] =
EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4),
- [ec_sensor_temp_water_in] =
- EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d),
[ec_sensor_temp_water_out] =
EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x0b),
+ [ec_sensor_temp_water_in] =
+ EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d),
};
static const struct ec_sensor_info sensors_family_amd_500[] = {
@@ -239,19 +242,20 @@ static const struct ec_sensor_info sensors_family_amd_500[] = {
static const struct ec_sensor_info sensors_family_amd_600[] = {
[ec_sensor_temp_cpu] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x30),
- [ec_sensor_temp_cpu_package] = EC_SENSOR("CPU Package", hwmon_temp, 1, 0x00, 0x31),
+ [ec_sensor_temp_cpu_package] =
+ EC_SENSOR("CPU Package", hwmon_temp, 1, 0x00, 0x31),
[ec_sensor_temp_mb] =
EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x32),
[ec_sensor_temp_vrm] =
EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x33),
[ec_sensor_temp_t_sensor] =
EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x36),
+ [ec_sensor_fan_cpu_opt] =
+ EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
[ec_sensor_temp_water_in] =
EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
[ec_sensor_temp_water_out] =
EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
- [ec_sensor_fan_cpu_opt] =
- EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
};
static const struct ec_sensor_info sensors_family_intel_300[] = {
--
2.49.0
next reply other threads:[~2025-04-08 20:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-08 20:44 Eugene Shalygin [this message]
2025-04-09 2:14 ` [PATCH] hwmon: (asus-ec-sensors) sort sensor definition arrays Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250408204505.11412-1-eugene.shalygin@gmail.com \
--to=eugene.shalygin@gmail.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox