From: Akshay Gupta <akshay.gupta@amd.com>
To: <linux-hwmon@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <linux@roeck-us.net>, <gregkh@linuxfoundation.org>,
<arnd@arndb.de>, <shyam-sundar.s-k@amd.com>,
<gautham.shenoy@amd.com>, <mario.limonciello@amd.com>,
<naveenkrishna.chatradhi@amd.com>, <anand.umarji@amd.com>,
Akshay Gupta <akshay.gupta@amd.com>
Subject: [PATCH v8 01/10] hwmon/misc: amd-sbi: Move core sbrmi from hwmon to misc
Date: Fri, 11 Apr 2025 13:31:13 +0000 [thread overview]
Message-ID: <20250411133122.1806991-2-akshay.gupta@amd.com> (raw)
In-Reply-To: <20250411133122.1806991-1-akshay.gupta@amd.com>
This is done to support other functionality provided by the SBRMI, which
does not fit in the hwmon subsystem.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
Changes since v4:
- Split in 3 new patches as per review comments
1. Bring drivers/hwmon to drivers/misc/amd-sbi
2. Move out the core functionality
3. Move out the hwmon functionality.
Changes since v3:
Rebase the patch
Added Acked-by
Changes since v2:
Rebase the patch
Changes since v1:
- File name update
- Add hwmon sensor registration in this patch
- Update Copyright year
drivers/hwmon/Kconfig | 10 ----------
drivers/misc/Kconfig | 1 +
drivers/misc/Makefile | 1 +
drivers/misc/amd-sbi/Kconfig | 9 +++++++++
drivers/misc/amd-sbi/Makefile | 2 ++
drivers/{hwmon => misc/amd-sbi}/sbrmi.c | 0
6 files changed, 13 insertions(+), 10 deletions(-)
create mode 100644 drivers/misc/amd-sbi/Kconfig
create mode 100644 drivers/misc/amd-sbi/Makefile
rename drivers/{hwmon => misc/amd-sbi}/sbrmi.c (100%)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f91f713b0105..6ddc5f2b5338 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1887,16 +1887,6 @@ config SENSORS_SBTSI
This driver can also be built as a module. If so, the module will
be called sbtsi_temp.
-config SENSORS_SBRMI
- tristate "Emulated SB-RMI sensor"
- depends on I2C
- help
- If you say yes here you get support for emulated RMI
- sensors on AMD SoCs with APML interface connected to a BMC device.
-
- This driver can also be built as a module. If so, the module will
- be called sbrmi.
-
config SENSORS_SHT15
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6b37d61150ee..9973cfd2ef5b 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -648,4 +648,5 @@ source "drivers/misc/uacce/Kconfig"
source "drivers/misc/pvpanic/Kconfig"
source "drivers/misc/mchp_pci1xxxx/Kconfig"
source "drivers/misc/keba/Kconfig"
+source "drivers/misc/amd-sbi/Kconfig"
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d6c917229c45..3dc18bc69a53 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -74,3 +74,4 @@ lan966x-pci-objs := lan966x_pci.o
lan966x-pci-objs += lan966x_pci.dtbo.o
obj-$(CONFIG_MCHP_LAN966X_PCI) += lan966x-pci.o
obj-y += keba/
+obj-y += amd-sbi/
diff --git a/drivers/misc/amd-sbi/Kconfig b/drivers/misc/amd-sbi/Kconfig
new file mode 100644
index 000000000000..be2d9e495eb7
--- /dev/null
+++ b/drivers/misc/amd-sbi/Kconfig
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config AMD_SBRMI_I2C
+ tristate "AMD side band RMI support"
+ depends on I2C
+ help
+ Side band RMI over I2C support for AMD out of band management.
+
+ This driver can also be built as a module. If so, the module will
+ be called sbrmi-i2c.
diff --git a/drivers/misc/amd-sbi/Makefile b/drivers/misc/amd-sbi/Makefile
new file mode 100644
index 000000000000..304394bf5e59
--- /dev/null
+++ b/drivers/misc/amd-sbi/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_AMD_SBRMI_I2C) += sbrmi.o
diff --git a/drivers/hwmon/sbrmi.c b/drivers/misc/amd-sbi/sbrmi.c
similarity index 100%
rename from drivers/hwmon/sbrmi.c
rename to drivers/misc/amd-sbi/sbrmi.c
--
2.25.1
next prev parent reply other threads:[~2025-04-11 13:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-11 13:31 [PATCH v8 00/10] misc: Move AMD side band interface(SBI) functionality Akshay Gupta
2025-04-11 13:31 ` Akshay Gupta [this message]
2025-04-11 13:31 ` [PATCH v8 02/10] misc: amd-sbi: Move protocol functionality to core file Akshay Gupta
2025-04-11 13:31 ` [PATCH v8 03/10] misc: amd-sbi: Move hwmon device sensor as separate entity Akshay Gupta
2025-04-11 13:31 ` [PATCH v8 04/10] misc: amd-sbi: Use regmap subsystem Akshay Gupta
2025-04-11 13:31 ` [PATCH v8 05/10] misc: amd-sbi: Optimize the wait condition for mailbox command completion Akshay Gupta
2025-04-11 13:31 ` [PATCH v8 06/10] misc: amd-sbi: Add support for AMD_SBI IOCTL Akshay Gupta
2025-04-11 13:31 ` [PATCH v8 07/10] misc: amd-sbi: Add support for CPUID protocol Akshay Gupta
2025-04-11 13:31 ` [PATCH v8 08/10] misc: amd-sbi: Add support for read MCA register protocol Akshay Gupta
2025-04-11 13:31 ` [PATCH v8 09/10] misc: amd-sbi: Add support for register xfer Akshay Gupta
2025-04-14 5:55 ` kernel test robot
2025-04-11 13:31 ` [PATCH v8 10/10] misc: amd-sbi: Add document for AMD SB IOCTL description Akshay Gupta
2025-04-11 13:51 ` [PATCH v8 00/10] misc: Move AMD side band interface(SBI) functionality Arnd Bergmann
2025-04-15 9:35 ` Gupta, Akshay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250411133122.1806991-2-akshay.gupta@amd.com \
--to=akshay.gupta@amd.com \
--cc=anand.umarji@amd.com \
--cc=arnd@arndb.de \
--cc=gautham.shenoy@amd.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mario.limonciello@amd.com \
--cc=naveenkrishna.chatradhi@amd.com \
--cc=shyam-sundar.s-k@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox