From: Guenter Roeck <linux@roeck-us.net>
To: Hardware Monitoring <linux-hwmon@vger.kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 01/20] hwmon: (jc42) Rely on subsystem locking
Date: Tue, 14 Oct 2025 08:24:56 -0700 [thread overview]
Message-ID: <20251014152515.785203-2-linux@roeck-us.net> (raw)
In-Reply-To: <20251014152515.785203-1-linux@roeck-us.net>
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/jc42.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 06f0ab2f52fa..6549dc543781 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
-#include <linux/mutex.h>
#include <linux/regmap.h>
/* Addresses to scan */
@@ -179,7 +178,6 @@ static struct jc42_chips jc42_chips[] = {
/* Each client has this additional data */
struct jc42_data {
- struct mutex update_lock; /* protect register access */
struct regmap *regmap;
bool extended; /* true if extended range supported */
bool valid;
@@ -216,8 +214,6 @@ static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
unsigned int regval;
int ret, temp, hyst;
- mutex_lock(&data->update_lock);
-
switch (attr) {
case hwmon_temp_input:
ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
@@ -295,8 +291,6 @@ static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
break;
}
- mutex_unlock(&data->update_lock);
-
return ret;
}
@@ -308,8 +302,6 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
int diff, hyst;
int ret;
- mutex_lock(&data->update_lock);
-
switch (attr) {
case hwmon_temp_min:
ret = regmap_write(data->regmap, JC42_REG_TEMP_LOWER,
@@ -356,8 +348,6 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
break;
}
- mutex_unlock(&data->update_lock);
-
return ret;
}
@@ -498,7 +488,6 @@ static int jc42_probe(struct i2c_client *client)
return PTR_ERR(data->regmap);
i2c_set_clientdata(client, data);
- mutex_init(&data->update_lock);
ret = regmap_read(data->regmap, JC42_REG_CAP, &cap);
if (ret)
--
2.45.2
next prev parent reply other threads:[~2025-10-14 15:25 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-14 15:24 [PATCH 00/20] hwmon: Rely on subsystem locking [set 1] Guenter Roeck
2025-10-14 15:24 ` Guenter Roeck [this message]
2025-10-14 15:24 ` [PATCH 02/20] hwmon: (lm90) Rely on subsystem locking Guenter Roeck
2025-10-14 15:24 ` [PATCH 03/20] hwmon: (adm9240) " Guenter Roeck
2025-10-14 15:24 ` [PATCH 04/20] hwmon: (emc1403) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 05/20] hwmon: (tmp464) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 06/20] hwmon: (tmp421) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 07/20] hwmon: (tmp401) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 08/20] hwmon: (tmp108) Drop mutex.h include Guenter Roeck
2025-10-14 15:25 ` [PATCH 09/20] hwmon: (drivetemp) Rely on subsystem locking Guenter Roeck
2025-10-14 15:25 ` [PATCH 10/20] hwmon: (max6697) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 11/20] hwmon: (ltc4245) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 12/20] hwmon: (lm95245) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 13/20] hwmon: (tmp103) Drop unnecessary include files Guenter Roeck
2025-10-14 15:25 ` [PATCH 14/20] hwmon: (tmp102) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 15/20] hwmon: (max6639) Rely on subsystem locking Guenter Roeck
2025-10-14 15:25 ` [PATCH 16/20] hwmon: (max31827) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 17/20] hwmon: (nct7904) " Guenter Roeck
2025-10-14 15:25 ` [PATCH 18/20] hwmon: (nct7363) Drop unnecessary include files Guenter Roeck
2025-10-14 15:25 ` [PATCH 19/20] hwmon: (max6620) Rely on subsystem locking Guenter Roeck
2025-10-14 15:25 ` [PATCH 20/20] hwmon: (max31790) " Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251014152515.785203-2-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-hwmon@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox