From: Antheas Kapenekakis <lkml@antheas.dev>
To: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
"Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Derek John Clark" <derekjohn.clark@gmail.com>,
"Joaquín Ignacio Aramendía" <samsagax@gmail.com>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>,
"Antheas Kapenekakis" <lkml@antheas.dev>,
"Armin Wolf" <W_Armin@gmx.de>
Subject: [PATCH v6 6/6] platform/x86: ayaneo-ec: Add suspend hook
Date: Wed, 19 Nov 2025 18:45:05 +0100 [thread overview]
Message-ID: <20251119174505.597218-7-lkml@antheas.dev> (raw)
In-Reply-To: <20251119174505.597218-1-lkml@antheas.dev>
The Ayaneo EC resets after hibernation, losing the charge control state.
Add a small PM hook to restore this state on hibernation resume.
The fan speed is also lost during hibernation, but since hibernation
failures are common with this class of devices, setting a low fan speed
when the userspace program controlling the fan will potentially not
take over could cause the device to overheat, so it is not restored.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
---
drivers/platform/x86/ayaneo-ec.c | 85 +++++++++++++++++++++++++++++++-
1 file changed, 84 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/ayaneo-ec.c b/drivers/platform/x86/ayaneo-ec.c
index a6fe141f07be..41a24e091248 100644
--- a/drivers/platform/x86/ayaneo-ec.c
+++ b/drivers/platform/x86/ayaneo-ec.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/power_supply.h>
#include <linux/sysfs.h>
#include <acpi/battery.h>
@@ -52,6 +53,11 @@ struct ayaneo_ec_platform_data {
struct platform_device *pdev;
struct ayaneo_ec_quirk *quirks;
struct acpi_battery_hook battery_hook;
+
+ // Protects access to restore_pwm
+ struct mutex hwmon_lock;
+ bool restore_charge_limit;
+ bool restore_pwm;
};
static const struct ayaneo_ec_quirk quirk_fan = {
@@ -208,10 +214,16 @@ static int ayaneo_ec_read(struct device *dev, enum hwmon_sensor_types type,
static int ayaneo_ec_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
+ struct ayaneo_ec_platform_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ guard(mutex)(&data->hwmon_lock);
+
switch (type) {
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_enable:
+ data->restore_pwm = false;
switch (val) {
case 1:
return ec_write(AYANEO_PWM_ENABLE_REG,
@@ -225,6 +237,17 @@ static int ayaneo_ec_write(struct device *dev, enum hwmon_sensor_types type,
case hwmon_pwm_input:
if (val < 0 || val > 255)
return -EINVAL;
+ if (data->restore_pwm) {
+ /*
+ * Defer restoring PWM control to after
+ * userspace resumes successfully
+ */
+ ret = ec_write(AYANEO_PWM_ENABLE_REG,
+ AYANEO_PWM_MODE_MANUAL);
+ if (ret)
+ return ret;
+ data->restore_pwm = false;
+ }
return ec_write(AYANEO_PWM_REG, (val * 100) / 255);
default:
break;
@@ -454,11 +477,14 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
data->pdev = pdev;
data->quirks = dmi_entry->driver_data;
+ ret = devm_mutex_init(&pdev->dev, &data->hwmon_lock);
+ if (ret)
+ return ret;
platform_set_drvdata(pdev, data);
if (data->quirks->has_fan_control) {
hwdev = devm_hwmon_device_register_with_info(&pdev->dev,
- "ayaneo_ec", NULL, &ayaneo_ec_chip_info, NULL);
+ "ayaneo_ec", data, &ayaneo_ec_chip_info, NULL);
if (IS_ERR(hwdev))
return PTR_ERR(hwdev);
}
@@ -475,10 +501,67 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
return 0;
}
+static int ayaneo_freeze(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
+ int ret;
+ u8 tmp;
+
+ if (data->quirks->has_charge_control) {
+ ret = ec_read(AYANEO_CHARGE_REG, &tmp);
+ if (ret)
+ return ret;
+
+ data->restore_charge_limit = tmp == AYANEO_CHARGE_VAL_INHIBIT;
+ }
+
+ if (data->quirks->has_fan_control) {
+ ret = ec_read(AYANEO_PWM_ENABLE_REG, &tmp);
+ if (ret)
+ return ret;
+
+ data->restore_pwm = tmp == AYANEO_PWM_MODE_MANUAL;
+
+ /*
+ * Release the fan when entering hibernation to avoid
+ * overheating if hibernation fails and hangs.
+ */
+ if (data->restore_pwm) {
+ ret = ec_write(AYANEO_PWM_ENABLE_REG, AYANEO_PWM_MODE_AUTO);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int ayaneo_restore(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
+ int ret;
+
+ if (data->quirks->has_charge_control && data->restore_charge_limit) {
+ ret = ec_write(AYANEO_CHARGE_REG, AYANEO_CHARGE_VAL_INHIBIT);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops ayaneo_pm_ops = {
+ .freeze = ayaneo_freeze,
+ .restore = ayaneo_restore,
+};
+
static struct platform_driver ayaneo_platform_driver = {
.driver = {
.name = "ayaneo-ec",
.dev_groups = ayaneo_ec_groups,
+ .pm = pm_sleep_ptr(&ayaneo_pm_ops),
},
.probe = ayaneo_ec_probe,
};
--
2.52.0
next prev parent reply other threads:[~2025-11-19 17:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-19 17:44 [PATCH v6 0/6] platform/x86: ayaneo-ec: Add Ayaneo Embedded Controller platform driver Antheas Kapenekakis
2025-11-19 17:45 ` [PATCH v6 1/6] " Antheas Kapenekakis
2025-11-19 17:45 ` [PATCH v6 2/6] platform/x86: ayaneo-ec: Add hwmon support Antheas Kapenekakis
2025-11-19 17:45 ` [PATCH v6 3/6] platform/x86: ayaneo-ec: Add charge control support Antheas Kapenekakis
2025-11-19 17:45 ` [PATCH v6 4/6] platform/x86: ayaneo-ec: Add controller power and modules attributes Antheas Kapenekakis
2025-11-19 17:45 ` [PATCH v6 5/6] platform/x86: ayaneo-ec: Move Ayaneo devices from oxpec to ayaneo-ec Antheas Kapenekakis
2025-11-19 17:45 ` Antheas Kapenekakis [this message]
2025-11-21 17:00 ` [PATCH v6 0/6] platform/x86: ayaneo-ec: Add Ayaneo Embedded Controller platform driver Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251119174505.597218-7-lkml@antheas.dev \
--to=lkml@antheas.dev \
--cc=W_Armin@gmx.de \
--cc=derekjohn.clark@gmail.com \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=platform-driver-x86@vger.kernel.org \
--cc=samsagax@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox