[PATCH] hwmon: (w83791d) Convert macros to functions to avoid TOCTOU

[Gui-Dong Han <hanguidong02@gmail.com>]

The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this leads to
Time-of-Check to Time-of-Use (TOCTOU) race conditions, potentially
causing divide-by-zero errors.

Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.

Additionally, in store_fan_div, move the calculation of the minimum
limit inside the update lock. This ensures that the read-modify-write
sequence operates on consistent data.

Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.

Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 9873964d6eb2 ("[PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D") 
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
---
Based on the discussion in the link, I will submit a series of patches to
address TOCTOU issues in the hwmon subsystem by converting macros to
functions or adjusting locking where appropriate.
---
 drivers/hwmon/w83791d.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index ace854b370a0..996e36951f9d 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -218,9 +218,14 @@ static u8 fan_to_reg(long rpm, int div)
 	return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 }
 
-#define FAN_FROM_REG(val, div)	((val) == 0 ? -1 : \
-				((val) == 255 ? 0 : \
-					1350000 / ((val) * (div))))
+static int fan_from_reg(int val, int div)
+{
+	if (val == 0)
+		return -1;
+	if (val == 255)
+		return 0;
+	return 1350000 / (val * div);
+}
 
 /* for temp1 which is 8-bit resolution, LSB = 1 degree Celsius */
 #define TEMP1_FROM_REG(val)	((val) * 1000)
@@ -521,7 +526,7 @@ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
 	struct w83791d_data *data = w83791d_update_device(dev); \
 	int nr = sensor_attr->index; \
 	return sprintf(buf, "%d\n", \
-		FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \
+		fan_from_reg(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \
 }
 
 show_fan_reg(fan);
@@ -585,10 +590,10 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
 	if (err)
 		return err;
 
+	mutex_lock(&data->update_lock);
 	/* Save fan_min */
-	min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
+	min = fan_from_reg(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
 
-	mutex_lock(&data->update_lock);
 	data->fan_div[nr] = div_to_reg(nr, val);
 
 	switch (nr) {
-- 
2.43.0