[PATCH RFC 08/16] ARM: dts: aspeed: Use specified wp-inverted property for AST2600 EVB

[Andrew Jeffery <andrew@codeconstruct.com.au>]

While sdhci-pltfm supports sdhci,wp-inverted, it also supports
the un-prefixed and specified wp-inverted property. Switch the EVB
devicetree to use the specified property to remove warnings when
checking the DTB.

Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
---
 arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
index 3eba676e57f1..c51977dcb56b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -315,7 +315,7 @@ &sdhci0 {
 	bus-width = <4>;
 	max-frequency = <100000000>;
 	sdhci-caps-mask = <0x7 0x0>;
-	sdhci,wp-inverted;
+	wp-inverted;
 	vmmc-supply = <&vcc_sdhci0>;
 	vqmmc-supply = <&vccq_sdhci0>;
 	clk-phase-sd-hs = <7>, <200>;
@@ -326,7 +326,7 @@ &sdhci1 {
 	bus-width = <4>;
 	max-frequency = <100000000>;
 	sdhci-caps-mask = <0x7 0x0>;
-	sdhci,wp-inverted;
+	wp-inverted;
 	vmmc-supply = <&vcc_sdhci1>;
 	vqmmc-supply = <&vccq_sdhci1>;
 	clk-phase-sd-hs = <7>, <200>;

-- 
2.47.3