[PATCH v3 0/2] Add driver support for ESWIN EIC7700 PVT controller

[hehuan1@eswincomputing.com]

From: Huan He <hehuan1@eswincomputing.com>

Add support for the ESWIN EIC7700 PVT (Process, Voltage, Temperature)
sensor

Features:
The driver supports monitoring of process, voltage and temperature
parameters through the hardware monitoring subsystem. It provides an
access to the sampled Temperature and Voltage.

Test:
Tested this patch on the SiFive HiFive Premier P550 (which uses the ESWIN
EIC7700 SoC).

Updates:

  Changes in v3:
  - Update eswin,eic7700-pvt.yaml
    - Remove redundant label property description and use 'label: true' to
      reference the definition in hwmon-common.yaml
    - Replace 'additionalProperties: false' with
      'unevaluatedProperties: false'
    - Remove the description for '#thermal-sensor-cells'
  - Update eic7700-pvt.c and eic7700-pvt.h
    - Fix clock reference count imbalance with Runtime PM:
      Replace devm_clk_get_enabled() with devm_clk_get() and manually
      manage clock enable/disable to avoid double-disable in remove() when
      Runtime PM is active. Clock is now enabled only during probe for
      eic7700_pvt_check_pwr(), then disabled before enabling Runtime PM,
      which takes full control of the clock thereafter
    - Add detailed comment explaining the spurious interrupt risk in
      eic7700_pvt_check_pwr()
    - Replace wait_for_completion_interruptible() with
      wait_for_completion_timeout() to prevent infinite wait

  Changes in v2:
  - Update eswin,eic7700-pvt.yaml
    - Reference the hwmon-common.yaml file
    - Remove the clock-names and reset-names properties
    - Move additionalProperties: false after the required block
    - Remove one example node to avoid redundancy
  - Update eic7700-pvt.c and eic7700-pvt.h
    - Remove unused sensor macros (PVT_SENSOR_FIRST, PVT_SENSOR_LAST,
      PVT_SENSORS_NUM)
    - Drop the unnecessary hwmon-sysfs.h header
    - Replace dynamic sensor info allocation with a static array and unify
      sensor labels
    - Remove unused hwmon_temp_type attribute
    - Eliminate redundant validation checks
    - Remove mutex and related locking, relying on hwmon core
      serialization
    - Replace per-sensor caches and completions with a single data cache
      and completion object
    - Remove pvt->sensor tracking. ISR no longer depends on the currently
      selected sensor
    - Move devm_add_action() registration after init_completion() for
      safer cleanup, and update cleanup function (pvt_clear_data)
    - Replace devm_reset_control_get_optional_exclusive() with
      devm_reset_control_get_exclusive_deasserted()
    - Replace eic7700_pvt_remove() with eic7700_pvt_disable_pm_runtime()
      and move it after PM runtime enable to avoid resource leaks on probe
      failure and remove clock disable and reset assert from
      eic7700_pvt_disable_pm_runtime() as it is already handled by devm_*
      framework
    - Remove redundant clock presence check in runtime_resume

  - Link to v1: https://lore.kernel.org/all/20260109090718.442-1-hehuan1@eswincomputing.com/

Huan He (2):
  dt-bindings: hwmon: Add Eswin EIC7700 PVT sensor
  hwmon: Add Eswin EIC7700 PVT sensor driver

 .../bindings/hwmon/eswin,eic7700-pvt.yaml     |  65 ++
 drivers/hwmon/Kconfig                         |  12 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/eic7700-pvt.c                   | 634 ++++++++++++++++++
 drivers/hwmon/eic7700-pvt.h                   | 108 +++
 5 files changed, 820 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/eswin,eic7700-pvt.yaml
 create mode 100644 drivers/hwmon/eic7700-pvt.c
 create mode 100644 drivers/hwmon/eic7700-pvt.h

-- 
2.25.1