[PATCH v2 10/11] hwmon: (pmbus/ltc2978) Remove use of i2c_match_id()

[Andrew Davis <afd@ti.com>]

The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This can instead be done with
i2c_client_get_device_id(). For this driver functionality should
not change. Switch over to remove the last couple users of the
i2c_match_id() function from kernel.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/hwmon/pmbus/ltc2978.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index 8f5be520a15db..d69a5e675e80e 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -733,7 +733,7 @@ static int ltc2978_probe(struct i2c_client *client)
 		return chip_id;
 
 	data->id = chip_id;
-	id = i2c_match_id(ltc2978_id, client);
+	id = i2c_client_get_device_id(client);
 	if (data->id != id->driver_data)
 		dev_warn(&client->dev,
 			 "Device mismatch: Configured %s (%d), detected %d\n",
-- 
2.39.2