[PATCH v2 07/11] hwmon: (pmbus/q54sj108a2) Remove use of i2c_match_id()

[Andrew Davis <afd@ti.com>]

The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has another benefit:
 * It also checks for device match data, which means we do not have
   to manually check that first.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/hwmon/pmbus/q54sj108a2.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/hwmon/pmbus/q54sj108a2.c b/drivers/hwmon/pmbus/q54sj108a2.c
index fc030ca34480c..88c25290ffce1 100644
--- a/drivers/hwmon/pmbus/q54sj108a2.c
+++ b/drivers/hwmon/pmbus/q54sj108a2.c
@@ -291,10 +291,7 @@ static int q54sj108a2_probe(struct i2c_client *client)
 				     I2C_FUNC_SMBUS_BLOCK_DATA))
 		return -ENODEV;
 
-	if (client->dev.of_node)
-		chip_id = (enum chips)(unsigned long)of_device_get_match_data(dev);
-	else
-		chip_id = i2c_match_id(q54sj108a2_id, client)->driver_data;
+	chip_id = (enum chips)(uintptr_t)i2c_get_match_data(client);
 
 	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
 	if (ret < 0) {
-- 
2.39.2