[PATCH 2/2] hwmon: (pmbus/max20830) add driver for max20830

[Alexis Czezar Torreno <alexisczezar.torreno@analog.com>]

Add support for MAX20830 step-down DC-DC switching regulator with
PMBus interface. It allows monitoring of input/output voltage,
output current and temperature through the PMBus serial interface.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
 Documentation/hwmon/index.rst    |  1 +
 Documentation/hwmon/max20830.rst | 48 ++++++++++++++++++++++++++
 MAINTAINERS                      |  2 ++
 drivers/hwmon/pmbus/Kconfig      |  9 +++++
 drivers/hwmon/pmbus/Makefile     |  1 +
 drivers/hwmon/pmbus/max20830.c   | 74 ++++++++++++++++++++++++++++++++++++++++
 6 files changed, 135 insertions(+)

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 8b655e5d6b68b90c697a52c7bf526e81d370caf7..56f7eb761be76dd627a2f34135abad05203b0582 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -158,6 +158,7 @@ Hardware Monitoring Kernel Drivers
    max197
    max20730
    max20751
+   max20830
    max31722
    max31730
    max31760
diff --git a/Documentation/hwmon/max20830.rst b/Documentation/hwmon/max20830.rst
new file mode 100644
index 0000000000000000000000000000000000000000..b9dffb76059781932d383ed798cecff69e738873
--- /dev/null
+++ b/Documentation/hwmon/max20830.rst
@@ -0,0 +1,48 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver max20830
+======================
+
+Supported chips:
+
+  * Analog Devices MAX20830
+
+    Prefix: 'max20830'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20830.pdf
+
+Author:
+
+  - Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices MAX20830
+Step-Down Switching Regulator with PMBus Interface.
+
+The MAX20830 is a 2.7V to 16V, 30A fully integrated step-down DC-DC switching
+regulator. Through the PMBus interface, the device can monitor input/output
+voltages, output current and temperature.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+Sysfs entries
+-------------
+
+================= ========================================
+in1_label         "vin"
+in1_input         Measured input voltage
+in1_alarm         Input voltage alarm
+in2_label         "vout1"
+in2_input         Measured output voltage
+curr1_label       "iout1"
+curr1_input       Measured output current
+curr1_alarm       Output current alarm
+temp1_input       Measured temperature
+temp1_alarm       Chip temperature alarm
+================= ========================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 031c743e979521a92ed9ac67915c178ce31727bd..d6a6745e2dae29c3b8f80bbe61c54a2f5ecd9f47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15585,6 +15585,8 @@ L:	linux-hwmon@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
+F:	Documentation/hwmon/max20830.rst
+F:	drivers/hwmon/pmbus/max20830.c
 
 MAX2175 SDR TUNER DRIVER
 M:	Ramesh Shanmugasundaram <rashanmu@gmail.com>
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 8f4bff375ecbc355f5ed3400855c2852ec2aa5ef..987705bf45b75b7b91ccc469247909f3c3f53d77 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -365,6 +365,15 @@ config SENSORS_MAX20751
 	  This driver can also be built as a module. If so, the module will
 	  be called max20751.
 
+config SENSORS_MAX20830
+	tristate "Analog Devices MAX20830"
+	help
+	  If you say yes here you get hardware monitoring support for Analog
+	  Devices MAX20830.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max20830.
+
 config SENSORS_MAX31785
 	tristate "Maxim MAX31785 and compatibles"
 	help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 7129b62bc00f8a2e98de14004997752a856dfda2..bc52f930e0825a902a0dd1c9e2b44f2e8d577c35 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SENSORS_MAX16601)	+= max16601.o
 obj-$(CONFIG_SENSORS_MAX17616)	+= max17616.o
 obj-$(CONFIG_SENSORS_MAX20730)	+= max20730.o
 obj-$(CONFIG_SENSORS_MAX20751)	+= max20751.o
+obj-$(CONFIG_SENSORS_MAX20830)	+= max20830.o
 obj-$(CONFIG_SENSORS_MAX31785)	+= max31785.o
 obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
 obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
diff --git a/drivers/hwmon/pmbus/max20830.c b/drivers/hwmon/pmbus/max20830.c
new file mode 100644
index 0000000000000000000000000000000000000000..bcf60fd948e3437f47267747547142704ae96378
--- /dev/null
+++ b/drivers/hwmon/pmbus/max20830.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardware monitoring driver for Analog Devices MAX20830
+ *
+ * Copyright (C) 2026 Analog Devices, Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info max20830_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+		PMBUS_HAVE_TEMP |
+		PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int max20830_probe(struct i2c_client *client)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_i2c_block_data(client, PMBUS_IC_DEVICE_ID,
+					    I2C_SMBUS_BLOCK_MAX, buf);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to read IC_DEVICE_ID\n");
+
+	buf[ret] = '\0';
+	if (ret < 9 || strncmp(buf + 1, "MAX20830", 8))
+		return dev_err_probe(&client->dev, -ENODEV,
+				     "Unsupported device: '%s'\n", buf);
+
+	return pmbus_do_probe(client, &max20830_info);
+}
+
+static const struct i2c_device_id max20830_id[] = {
+	{"max20830"},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max20830_id);
+
+static const struct of_device_id max20830_of_match[] = {
+	{ .compatible = "adi,max20830" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max20830_of_match);
+
+static struct i2c_driver max20830_driver = {
+	.driver = {
+		.name = "max20830",
+		.of_match_table = max20830_of_match,
+	},
+	.probe = max20830_probe,
+	.id_table = max20830_id,
+};
+
+module_i2c_driver(max20830_driver);
+
+MODULE_AUTHOR("Alexis Czezar Torreno <alexisczezar.torreno@analog.com>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices MAX20830");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);

-- 
2.34.1