From: Ninad Naik <ninadnaik07@gmail.com>
To: linux@roeck-us.net
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
skhan@linuxfoundation.org, me@brighamcampbell.com,
linux-kernel-mentees@lists.linux.dev,
Ninad Naik <ninadnaik07@gmail.com>
Subject: [PATCH 1/3] hwmon: lm93: Add missing blank lines after declarations
Date: Thu, 7 May 2026 15:41:41 +0530 [thread overview]
Message-ID: <20260507101143.559475-2-ninadnaik07@gmail.com> (raw)
In-Reply-To: <20260507101143.559475-1-ninadnaik07@gmail.com>
Fix checkpatch.pl warning by adding blank lines after variable declaration.
No functional changes are made.
Signed-off-by: Ninad Naik <ninadnaik07@gmail.com>
---
drivers/hwmon/lm93.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index be4853fad80f..c15e2a02dd86 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -372,6 +372,7 @@ static u8 LM93_IN_TO_REG(int nr, unsigned val)
const long intercept = uv_min - slope * lm93_vin_reg_min[nr];
u8 result = ((uv - intercept + (slope/2)) / slope);
+
result = clamp_val(result,
lm93_vin_reg_min[nr], lm93_vin_reg_max[nr]);
return result;
@@ -383,6 +384,7 @@ static unsigned LM93_IN_REL_FROM_REG(u8 reg, int upper, int vid)
const long uv_offset = upper ? (((reg >> 4 & 0x0f) + 1) * 12500) :
(((reg >> 0 & 0x0f) + 1) * -25000);
const long uv_vid = vid * 1000;
+
return (uv_vid + uv_offset + 5000) / 10000;
}
@@ -397,6 +399,7 @@ static unsigned LM93_IN_REL_FROM_REG(u8 reg, int upper, int vid)
static u8 LM93_IN_REL_TO_REG(unsigned val, int upper, int vid)
{
long uv_offset = vid * 1000 - val * 10000;
+
if (upper) {
uv_offset = clamp_val(uv_offset, 12500, 200000);
return (u8)((uv_offset / 12500 - 1) << 4);
@@ -425,6 +428,7 @@ static int LM93_TEMP_FROM_REG(u8 reg)
static u8 LM93_TEMP_TO_REG(long temp)
{
int ntemp = clamp_val(temp, LM93_TEMP_MIN, LM93_TEMP_MAX);
+
ntemp += (ntemp < 0 ? -500 : 500);
return (u8)(ntemp / 1000);
}
@@ -582,6 +586,7 @@ static int LM93_PWM_FROM_REG(u8 reg, enum pwm_freq freq)
static u8 LM93_PWM_TO_REG(int pwm, enum pwm_freq freq)
{
int i;
+
for (i = 0; i < 13; i++)
if (pwm <= lm93_pwm_map[freq][i])
break;
@@ -632,6 +637,7 @@ static int LM93_PWM_FREQ_FROM_REG(u8 reg)
static u8 LM93_PWM_FREQ_TO_REG(int freq)
{
int i;
+
for (i = 7; i > 0; i--)
if (freq <= lm93_pwm_freq_map[i])
break;
@@ -657,6 +663,7 @@ static int LM93_SPINUP_TIME_FROM_REG(u8 reg)
static u8 LM93_SPINUP_TIME_TO_REG(int time)
{
int i;
+
for (i = 0; i < 7; i++)
if (time <= lm93_spinup_time_map[i])
break;
@@ -710,6 +717,7 @@ static int LM93_INTERVAL_FROM_REG(u8 reg)
static u8 LM93_INTERVAL_TO_REG(long interval)
{
int i;
+
for (i = 0; i < 9; i++)
if (interval <= lm93_interval_map[i])
break;
@@ -772,6 +780,7 @@ static unsigned LM93_GPI_FROM_REG(u8 reg)
static unsigned LM93_ALARMS_FROM_REG(struct block1_t b1)
{
unsigned result;
+
result = b1.host_status_2 & 0x3f;
if (vccp_limit_type[0])
@@ -1104,6 +1113,7 @@ static ssize_t in_show(struct device *dev, struct device_attribute *attr,
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_IN_FROM_REG(nr, data->block3[nr]));
}
@@ -1259,6 +1269,7 @@ static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_TEMP_FROM_REG(data->block2[nr]));
}
@@ -1271,6 +1282,7 @@ static ssize_t temp_min_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_TEMP_FROM_REG(data->temp_lim[nr].min));
}
@@ -1304,6 +1316,7 @@ static ssize_t temp_max_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_TEMP_FROM_REG(data->temp_lim[nr].max));
}
@@ -1337,6 +1350,7 @@ static ssize_t temp_auto_base_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_TEMP_FROM_REG(data->block10.base[nr]));
}
@@ -1370,6 +1384,7 @@ static ssize_t temp_auto_boost_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_TEMP_FROM_REG(data->boost[nr]));
}
@@ -1405,6 +1420,7 @@ static ssize_t temp_auto_boost_hyst_show(struct device *dev,
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
+
return sprintf(buf, "%d\n",
LM93_AUTO_BOOST_HYST_FROM_REGS(data, nr, mode));
}
@@ -1447,6 +1463,7 @@ static ssize_t temp_auto_offset_show(struct device *dev,
int ofs = s_attr->nr;
struct lm93_data *data = lm93_update_device(dev);
int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
+
return sprintf(buf, "%d\n",
LM93_TEMP_AUTO_OFFSET_FROM_REG(data->block10.offset[ofs],
nr, mode));
@@ -1525,6 +1542,7 @@ static ssize_t temp_auto_pwm_min_show(struct device *dev,
int nr = (to_sensor_dev_attr(attr))->index;
u8 reg, ctl4;
struct lm93_data *data = lm93_update_device(dev);
+
reg = data->auto_pwm_min_hyst[nr/2] >> 4 & 0x0f;
ctl4 = data->block9[nr][LM93_PWM_CTL4];
return sprintf(buf, "%d\n", LM93_PWM_FROM_REG(reg, (ctl4 & 0x07) ?
@@ -1570,6 +1588,7 @@ static ssize_t temp_auto_offset_hyst_show(struct device *dev,
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
int mode = LM93_TEMP_OFFSET_MODE_FROM_REG(data->sfc2, nr);
+
return sprintf(buf, "%d\n", LM93_TEMP_OFFSET_FROM_REG(
data->auto_pwm_min_hyst[nr / 2], mode));
}
@@ -1921,6 +1940,7 @@ static ssize_t pwm_auto_channels_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", data->block9[nr][LM93_PWM_CTL1]);
}
@@ -2000,6 +2020,7 @@ static ssize_t pwm_auto_spinup_time_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_SPINUP_TIME_FROM_REG(
data->block9[nr][LM93_PWM_CTL3]));
}
@@ -2035,6 +2056,7 @@ static ssize_t pwm_auto_prochot_ramp_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n",
LM93_RAMP_FROM_REG(data->pwm_ramp_ctl >> 4 & 0x0f));
}
@@ -2067,6 +2089,7 @@ static ssize_t pwm_auto_vrdhot_ramp_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n",
LM93_RAMP_FROM_REG(data->pwm_ramp_ctl & 0x0f));
}
@@ -2100,6 +2123,7 @@ static ssize_t vid_show(struct device *dev, struct device_attribute *attr,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_VID_FROM_REG(data->vid[nr]));
}
@@ -2111,6 +2135,7 @@ static ssize_t prochot_show(struct device *dev, struct device_attribute *attr,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", data->block4[nr].cur);
}
@@ -2122,6 +2147,7 @@ static ssize_t prochot_avg_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", data->block4[nr].avg);
}
@@ -2133,6 +2159,7 @@ static ssize_t prochot_max_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", data->prochot_max[nr]);
}
@@ -2168,6 +2195,7 @@ static ssize_t prochot_override_show(struct device *dev,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n",
(data->prochot_override & prochot_override_mask[nr]) ? 1 : 0);
}
@@ -2206,6 +2234,7 @@ static ssize_t prochot_interval_show(struct device *dev,
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
u8 tmp;
+
if (nr == 1)
tmp = (data->prochot_interval & 0xf0) >> 4;
else
@@ -2248,6 +2277,7 @@ static ssize_t prochot_override_duty_cycle_show(struct device *dev,
char *buf)
{
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", data->prochot_override & 0x0f);
}
@@ -2279,6 +2309,7 @@ static ssize_t prochot_short_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", (data->config & 0x10) ? 1 : 0);
}
@@ -2312,6 +2343,7 @@ static ssize_t vrdhot_show(struct device *dev, struct device_attribute *attr,
{
int nr = (to_sensor_dev_attr(attr))->index;
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n",
data->block1.host_status_1 & (1 << (nr + 4)) ? 1 : 0);
}
@@ -2323,6 +2355,7 @@ static ssize_t gpio_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_GPI_FROM_REG(data->gpi));
}
@@ -2332,6 +2365,7 @@ static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct lm93_data *data = lm93_update_device(dev);
+
return sprintf(buf, "%d\n", LM93_ALARMS_FROM_REG(data->block1));
}
--
2.54.0
next prev parent reply other threads:[~2026-05-07 10:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-07 10:11 [PATCH 0/3] hwmon: lm93: clean up coding style issues Ninad Naik
2026-05-07 10:11 ` Ninad Naik [this message]
2026-05-07 10:11 ` [PATCH 2/3] hwmon: lm93: Change unsigned to unsigned int for clarity Ninad Naik
2026-05-07 21:11 ` sashiko-bot
2026-05-07 10:11 ` [PATCH 3/3] hwmon: lm93: Remove else blocks after break or return for consistency Ninad Naik
2026-05-08 16:27 ` [PATCH 0/3] hwmon: lm93: clean up coding style issues Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260507101143.559475-2-ninadnaik07@gmail.com \
--to=ninadnaik07@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel-mentees@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=me@brighamcampbell.com \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox