From: Fred Chen <fredchen.openbmc@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Frank Li <Frank.Li@nxp.com>, Wensheng Wang <wenswang@yeah.net>,
Colin Huang <u8813345@gmail.com>,
Brian Chiang <chiang.brian@inventec.com>,
Eddie James <eajames@linux.ibm.com>,
Antoni Pokusinski <apokusinski01@gmail.com>,
Dixit Parmar <dixitparmar19@gmail.com>,
Thorsten Blum <thorsten.blum@linux.dev>,
Ashish Yadav <ashish.yadav@infineon.com>,
Alexis Czezar Torreno <alexisczezar.torreno@analog.com>,
Syed Arif <arif.syed@hpe.com>,
ChiShih Tsai <tomtsai764@gmail.com>,
Cosmo Chou <chou.cosmo@gmail.com>,
Vasileios Amoiridis <vasileios.amoiridis@cern.ch>,
Yuxi Wang <Yuxi.Wang@monolithicpower.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH 0/2] hwmon: Add support for Analog Devices MAX20912 and MAX20916
Date: Tue, 7 Jul 2026 20:26:36 +0800 [thread overview]
Message-ID: <20260707122701.751878-1-fredchen.openbmc@gmail.com> (raw)
Add PMBus hardware monitoring support for the Analog Devices MAX20912
and MAX20916 dual-output multiphase voltage regulators.
Both devices expose two independently regulated output voltage rails,
Rail A and Rail B, using the VR12 VID interface. Each rail reports input
current, output current, temperature, input power, and output power.
Input voltage is reported on Rail A only.
Fred Chen (2):
dt-bindings: trivial-devices: Add adi max20912 and max20916
hwmon: (pmbus) Add driver for Analog Devices MAX20912 and MAX20916
.../devicetree/bindings/trivial-devices.yaml | 4 +
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/max20912.rst | 156 ++++++++++++++++++
MAINTAINERS | 7 +
drivers/hwmon/pmbus/Kconfig | 9 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/max20912.c | 70 ++++++++
7 files changed, 248 insertions(+)
create mode 100644 Documentation/hwmon/max20912.rst
create mode 100644 drivers/hwmon/pmbus/max20912.c
--
2.52.0
next reply other threads:[~2026-07-07 12:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-07 12:26 Fred Chen [this message]
2026-07-07 12:26 ` [PATCH 1/2] dt-bindings: trivial-devices: Add adi max20912 and max20916 Fred Chen
2026-07-07 12:32 ` sashiko-bot
2026-07-07 12:26 ` [PATCH 2/2] hwmon: (pmbus) Add driver for Analog Devices MAX20912 and MAX20916 Fred Chen
2026-07-07 12:33 ` Krzysztof Kozlowski
2026-07-07 12:36 ` sashiko-bot
2026-07-07 13:52 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260707122701.751878-1-fredchen.openbmc@gmail.com \
--to=fredchen.openbmc@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=Yuxi.Wang@monolithicpower.com \
--cc=alexisczezar.torreno@analog.com \
--cc=apokusinski01@gmail.com \
--cc=arif.syed@hpe.com \
--cc=ashish.yadav@infineon.com \
--cc=chiang.brian@inventec.com \
--cc=chou.cosmo@gmail.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dixitparmar19@gmail.com \
--cc=eajames@linux.ibm.com \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=thorsten.blum@linux.dev \
--cc=tomtsai764@gmail.com \
--cc=u8813345@gmail.com \
--cc=vasileios.amoiridis@cern.ch \
--cc=wenswang@yeah.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox