Re: [PATCH v5 0/6] hwmon: Add support for SPD5118 compliant chips

[Guenter Roeck <linux@roeck-us.net>]

On 6/10/24 08:27, Thomas Weißschuh wrote:
> On 2024-06-10 07:40:57+0000, Guenter Roeck wrote:
>> Add support for SPD5118 (Jedec JESD300) compliant chips supporting
>> a temperature sensor and SPD NVRAM. Such devices are typically found on
>> DDR5 memory modules.
> 
> <snip>
> 
>> ----------------------------------------------------------------
>> Guenter Roeck (6):
>>        dt-bindings: trivial-devices: Add jedec,spd5118
>>        hwmon: Add support for SPD5118 compliant temperature sensors
>>        hwmon: (spd5118) Add suspend/resume support
>>        hwmon: (spd5118) Add support for reading SPD data
>>        i2c: smbus: Support DDR5 and LPDDR5 SPD EEPROMs
>>        hwmon: (spd5118) Add configuration option for auto-detection
>>
>>   .../devicetree/bindings/trivial-devices.yaml       |   2 +
>>   Documentation/hwmon/index.rst                      |   1 +
>>   Documentation/hwmon/spd5118.rst                    |  63 ++
>>   drivers/hwmon/Kconfig                              |  31 +
>>   drivers/hwmon/Makefile                             |   1 +
>>   drivers/hwmon/spd5118.c                            | 658 +++++++++++++++++++++
>>   drivers/i2c/i2c-smbus.c                            |   6 +-
>>   7 files changed, 761 insertions(+), 1 deletion(-)
>>   create mode 100644 Documentation/hwmon/spd5118.rst
>>   create mode 100644 drivers/hwmon/spd5118.c
> 
> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>

Thanks!

Guenter