From: Marcello Sylvester Bauer <sylv@sylv.io>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org,
Patrick Rudolph <patrick.rudolph@9elements.com>,
Jean Delvare <jdelvare@suse.com>
Subject: Re: [PATCH v4 4/4] hwmon: (max6639) Change from pdata to dt configuration
Date: Thu, 19 May 2022 12:31:47 +0200 [thread overview]
Message-ID: <79711b3cd598b3ac5e2c66e4146a0c2d1f116d31.camel@sylv.io> (raw)
In-Reply-To: <20220203191329.GA237056@roeck-us.net>
On Thu, 2022-02-03 at 11:13 -0800, Guenter Roeck wrote:
> On Thu, Jan 27, 2022 at 05:17:30PM +0100, Marcello Sylvester Bauer
> wrote:
> > max6639_platform_data is not used by any in-kernel driver and does
> > not
> > address the MAX6639 channels separately. Move to device tree
> > configuration with explicit properties to configure each channel.
> >
> > Non-DT platform can still use this module with its default
> > configuration.
> >
> > Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> > ---
> > drivers/hwmon/max6639.c | 162 +++++++++++++++++++---
> > ----
> > include/linux/platform_data/max6639.h | 15 ---
> > 2 files changed, 119 insertions(+), 58 deletions(-)
> > delete mode 100644 include/linux/platform_data/max6639.h
> >
> > diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
> > index 14bb7726f8d7..717bde3392bd 100644
> > --- a/drivers/hwmon/max6639.c
> > +++ b/drivers/hwmon/max6639.c
> > @@ -19,7 +19,6 @@
> > #include <linux/hwmon-sysfs.h>
> > #include <linux/err.h>
> > #include <linux/mutex.h>
> > -#include <linux/platform_data/max6639.h>
> >
> > /* Addresses to scan */
> > static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f,
> > I2C_CLIENT_END };
> > @@ -85,8 +84,9 @@ struct max6639_data {
> > u8 temp_ot[2]; /* OT Temperature, 0..255 C (-
> > >_emergency) */
> >
> > /* Register values initialized only once */
> > - u8 ppr; /* Pulses per rotation 0..3 for
> > 1..4 ppr */
> > - u8 rpm_range; /* Index in above rpm_ranges table
> > */
> > + u8 ppr[2]; /* Pulses per rotation 0..3 for
> > 1..4 ppr */
> > + u8 rpm_range[2]; /* Index in above rpm_ranges table
> > */
> > + u8 pwm_polarity[2]; /* Fans PWM polarity, 0..1 */
> >
> > /* Optional regulator for FAN supply */
> > struct regulator *reg;
> > @@ -319,7 +319,7 @@ static ssize_t fan_input_show(struct device
> > *dev,
> > return PTR_ERR(data);
> >
> > return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr-
> > >index],
> > - data->rpm_range));
> > + data->rpm_range[attr->index]));
> > }
> >
> > static ssize_t alarm_show(struct device *dev,
> > @@ -386,28 +386,26 @@ static struct attribute *max6639_attrs[] = {
> > ATTRIBUTE_GROUPS(max6639);
> >
> > /*
> > - * returns respective index in rpm_ranges table
> > - * 1 by default on invalid range
> > + * Get respective index in rpm_ranges table
> > */
> > -static int rpm_range_to_reg(int range)
> > +static int rpm_range_to_index(u8 *index, int range)
>
> That doesn't reauire an extra parameter; the return value can be used
> both
> as index and error return value.
makes sense. ack
>
> > {
> > int i;
> >
> > for (i = 0; i < ARRAY_SIZE(rpm_ranges); i++) {
> > - if (rpm_ranges[i] == range)
> > - return i;
> > + if (rpm_ranges[i] == range) {
>
> Keep
ack
> return i;
>
> > + *index = i;
> > + return 0;
> > + }
> > }
> >
> > - return 1; /* default: 4000 RPM */
> > + return -EINVAL;
> > }
> >
> > static int max6639_init_client(struct i2c_client *client,
> > struct max6639_data *data)
> > {
> > - struct max6639_platform_data *max6639_info =
> > - dev_get_platdata(&client->dev);
> > int i;
> > - int rpm_range = 1; /* default: 4000 RPM */
> > int err;
> >
> > /* Reset chip to default values, see below for GCONFIG
> > setup */
> > @@ -416,43 +414,25 @@ static int max6639_init_client(struct
> > i2c_client *client,
> > if (err)
> > goto exit;
> >
> > - /* Fans pulse per revolution is 2 by default */
> > - if (max6639_info && max6639_info->ppr > 0 &&
> > - max6639_info->ppr < 5)
> > - data->ppr = max6639_info->ppr;
> > - else
> > - data->ppr = 2;
> > - data->ppr -= 1;
> > -
> > - if (max6639_info)
> > - rpm_range = rpm_range_to_reg(max6639_info-
> > >rpm_range);
> > - data->rpm_range = rpm_range;
> > -
> > for (i = 0; i < 2; i++) {
> >
> > /* Set Fan pulse per revolution */
> > err = i2c_smbus_write_byte_data(client,
> > MAX6639_REG_FAN_PPR(i),
> > - data->ppr << 6);
> > + data->ppr[i] << 6);
> > if (err)
> > goto exit;
> >
> > /* Fans config PWM, RPM */
> > err = i2c_smbus_write_byte_data(client,
> > MAX6639_REG_FAN_CONFIG1(i),
> > - MAX6639_FAN_CONFIG1_PWM | rpm_range);
> > + MAX6639_FAN_CONFIG1_PWM | data-
> > >rpm_range[i]);
> > if (err)
> > goto exit;
> >
> > - /* Fans PWM polarity high by default */
> > - if (max6639_info && max6639_info->pwm_polarity ==
> > 0)
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_FAN_CONFIG2a(i), 0x00);
> > - else
> > - err = i2c_smbus_write_byte_data(client,
> > - MAX6639_REG_FAN_CONFIG2a(i), 0x02);
> > - if (err)
> > - goto exit;
> > + /* Fans PWM polarity */
> > + err = i2c_smbus_write_byte_data(client,
> > + MAX6639_REG_FAN_CONFIG2a(i), data-
> > >pwm_polarity[i] ? 0x00 : 0x02);
> >
> > /*
> > * /THERM full speed enable,
> > @@ -464,10 +444,6 @@ static int max6639_init_client(struct
> > i2c_client *client,
> > if (err)
> > goto exit;
> >
> > - /* Max. temp. 80C/90C/100C */
> > - data->temp_therm[i] = 80;
> > - data->temp_alert[i] = 90;
> > - data->temp_ot[i] = 100;
> > err = i2c_smbus_write_byte_data(client,
> > MAX6639_REG_THERM_LIMIT(i),
> > data->temp_therm[i]);
> > @@ -483,8 +459,6 @@ static int max6639_init_client(struct
> > i2c_client *client,
> > if (err)
> > goto exit;
> >
> > - /* PWM 120/120 (i.e. 100%) */
> > - data->pwm[i] = 120;
> > err = i2c_smbus_write_byte_data(client,
> > MAX6639_REG_TARGTDUTY(i), data-
> > >pwm[i]);
> > if (err)
> > @@ -524,12 +498,87 @@ static void max6639_regulator_disable(void
> > *data)
> > regulator_disable(data);
> > }
> >
> > +static int max6639_probe_child_from_dt(struct i2c_client *client,
> > + struct device_node *child,
> > + struct max6639_data *data)
> > +
> > +{
> > + struct device *dev = &client->dev;
> > + u32 i, val;
> > + int err;
> > +
> > + err = of_property_read_u32(child, "reg", &i);
> > + if (err) {
> > + dev_err(dev, "missing reg property of %pOFn\n",
> > child);
> > + return err;
> > + }
> > +
> > + if (i >= 2) {
> > + dev_err(dev, "invalid reg %d of %pOFn\n", i,
> > child);
> > + return -EINVAL;
> > + }
> > +
> > + err = of_property_read_u32(child, "pulses-per-revolution",
> > &val);
> > + if (!err) {
> > + if (val < 0 || val > 5) {
> > + dev_err(dev, "invalid pulses-per-revolution
> > %d of %pOFn\n", val, child);
> > + return -EINVAL;
> > + }
> > + data->ppr[i] = val;
> > + }
> > +
> > + err = of_property_read_u32(child, "rpm-max", &val);
> > + if (!err) {
> > + err = rpm_range_to_index(&data->rpm_range[i], val);
> > + if (err) {
> > + dev_err(dev, "invalid rpm-max %d of
> > %pOFn\n", val, child);
> > + return err;
> > + }
>
> err = rpm_range_to_index(val);
> if (err < 0) {
> dev_err(dev, "invalid rpm-max %d of %pOFn\n",
> val, child);
> return err;
> }
> data->rpm_range[i] = err;
thanks. ack
>
> > + }
> > +
> > + err = of_property_read_u32(child, "pwm-polarity", &val);
> > + if (!err) {
> > + if (val > 1) {
> > + dev_err(dev, "invalid pwm-polarity %d of
> > %pOFn\n", val, child);
> > + return -EINVAL;
> > + }
> > + data->pwm_polarity[i] = val;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int max6639_probe_from_dt(struct i2c_client *client, struct
> > max6639_data *data)
> > +{
> > + struct device *dev = &client->dev;
> > + const struct device_node *np = dev->of_node;
> > + struct device_node *child;
> > + int err;
> > +
> > + /* Compatible with non-DT platforms */
> > + if (!np)
> > + return 0;
> > +
> > + for_each_child_of_node(np, child) {
> > + if (strcmp(child->name, "channel"))
> > + continue;
> > +
> > + err = max6639_probe_child_from_dt(client, child,
> > data);
> > + if (err) {
> > + of_node_put(child);
> > + return err;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int max6639_probe(struct i2c_client *client)
> > {
> > struct device *dev = &client->dev;
> > struct max6639_data *data;
> > struct device *hwmon_dev;
> > - int err;
> > + int err, i;
> >
> > data = devm_kzalloc(dev, sizeof(struct max6639_data),
> > GFP_KERNEL);
> > if (!data)
> > @@ -560,6 +609,24 @@ static int max6639_probe(struct i2c_client
> > *client)
> >
> > mutex_init(&data->update_lock);
> >
> > + /* default values */
> > + for (i = 0; i < 2; i++) {
> > + /* 4000 RPM */
> > + data->rpm_range[i] = 1;
> > + data->ppr[i] = 2;
> > + data->pwm_polarity[i] = 1;
> > + /* Max. temp. 80C/90C/100C */
> > + data->temp_therm[i] = 80;
> > + data->temp_alert[i] = 90;
> > + data->temp_ot[i] = 100;
> > + /* PWM 120/120 (i.e. 100%) */
> > + data->pwm[i] = 120;
> > + }
> > +
> > + err = max6639_probe_from_dt(client, data);
> > + if (err)
> > + return err;
> > +
> > /* Initialize the max6639 chip */
> > err = max6639_init_client(client, data);
> > if (err < 0)
> > @@ -618,6 +685,14 @@ static const struct i2c_device_id max6639_id[]
> > = {
> >
> > MODULE_DEVICE_TABLE(i2c, max6639_id);
> >
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id maxim_of_platform_match[] = {
> > + {.compatible = "maxim,max6639"},
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, maxim_of_platform_match);
> > +#endif
> > +
> > static SIMPLE_DEV_PM_OPS(max6639_pm_ops, max6639_suspend,
> > max6639_resume);
> >
> > static struct i2c_driver max6639_driver = {
> > @@ -625,6 +700,7 @@ static struct i2c_driver max6639_driver = {
> > .driver = {
> > .name = "max6639",
> > .pm = &max6639_pm_ops,
> > + .of_match_table =
> > of_match_ptr(maxim_of_platform_match),
> > },
> > .probe_new = max6639_probe,
> > .id_table = max6639_id,
> > diff --git a/include/linux/platform_data/max6639.h
> > b/include/linux/platform_data/max6639.h
> > deleted file mode 100644
> > index 65bfdb4fdc15..000000000000
> > --- a/include/linux/platform_data/max6639.h
> > +++ /dev/null
> > @@ -1,15 +0,0 @@
> > -/* SPDX-License-Identifier: GPL-2.0 */
> > -#ifndef _LINUX_MAX6639_H
> > -#define _LINUX_MAX6639_H
> > -
> > -#include <linux/types.h>
> > -
> > -/* platform data for the MAX6639 temperature sensor and fan
> > control */
> > -
> > -struct max6639_platform_data {
> > - bool pwm_polarity; /* Polarity low (0) or high (1,
> > default) */
> > - int ppr; /* Pulses per rotation 1..4
> > (default == 2) */
> > - int rpm_range; /* 2000, 4000 (default), 8000 or
> > 16000 */
> > -};
> > -
> > -#endif /* _LINUX_MAX6639_H */
prev parent reply other threads:[~2022-05-19 10:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-27 16:17 [PATCH v4 0/4] Add max6639 regulator and devicetree support Marcello Sylvester Bauer
2022-01-27 16:17 ` [PATCH v4 1/4] hwmon: (max6639) Update Datasheet URL Marcello Sylvester Bauer
2022-02-03 19:02 ` Guenter Roeck
2022-01-27 16:17 ` [PATCH v4 2/4] hwmon: (max6639) Add regulator support Marcello Sylvester Bauer
2022-02-03 19:04 ` Guenter Roeck
2022-01-27 16:17 ` [PATCH v4 3/4] dt-bindings: hwmon: Add binding for max6639 Marcello Sylvester Bauer
2022-02-03 19:07 ` Guenter Roeck
2022-02-04 23:32 ` Rob Herring
2022-02-07 10:03 ` sylv
2022-02-07 23:17 ` Guenter Roeck
2022-01-27 16:17 ` [PATCH v4 4/4] hwmon: (max6639) Change from pdata to dt configuration Marcello Sylvester Bauer
2022-02-03 19:13 ` Guenter Roeck
2022-05-19 10:31 ` Marcello Sylvester Bauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=79711b3cd598b3ac5e2c66e4146a0c2d1f116d31.camel@sylv.io \
--to=sylv@sylv.io \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=patrick.rudolph@9elements.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox