Linux Hardware Monitor development
 help / color / mirror / Atom feed
From: Amna Waseem <Amna.Waseem@axis.com>
To: Guenter Roeck <linux@roeck-us.net>, Conor Dooley <conor@kernel.org>
Cc: Jean Delvare <jdelvare@suse.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@axis.com
Subject: Re: [PATCH v2 1/2] dt-bindings: hwmon: ti,ina2xx: Add ti,alert-polarity property
Date: Thu, 30 May 2024 10:02:40 +0200	[thread overview]
Message-ID: <8a41d875-8e6c-43da-90c7-0547648f214a@axis.com> (raw)
In-Reply-To: <f41480c8-f149-4826-aa28-549a504df181@roeck-us.net>

On 5/29/24 18:20, Guenter Roeck wrote:
> On 5/29/24 09:17, Conor Dooley wrote:
>> On Wed, May 29, 2024 at 11:47:44AM +0200, Amna Waseem wrote:
>>> Add a property to the binding to configure the Alert Polarity.
>>> Alert pin is asserted based on the value of Alert Polarity bit of
>>> Mask/Enable register. It is by default 0 which means Alert pin is
>>> configured to be active low open collector. Value of 1 maps to
>>> Inverted (active high open collector).
>>>
>>> Signed-off-by: Amna Waseem <Amna.Waseem@axis.com>
>>> ---
>>>   Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml | 9 +++++++++
>>>   1 file changed, 9 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml 
>>> b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
>>> index df86c2c92037..5a16d2d94587 100644
>>> --- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
>>> +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
>>> @@ -66,6 +66,14 @@ properties:
>>>       description: phandle to the regulator that provides the VS 
>>> supply typically
>>>         in range from 2.7 V to 5.5 V.
>>>   +  ti,alert-polarity:
>>> +    description: Alert polarity bit value of Mask/Enable register. 
>>> Alert pin is
>>> +      asserted based on the value of Alert polarity Bit. Default 
>>> value is Normal
>>> +      (0 which maps to active-low open collector). The other value 
>>> is Inverted
>>> +      (1 which maps to active-high open collector).
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    enum: [0, 1]
>>
>> There's no need for this to have a value, it's sufficient to be a flag
>> of "ti,alert-active-high". Present would mean active-high and absent
>> active-low. This has the added benefit the devicetree node being
>> understandable to a reader.
>>
>
> Agreed, makes sense. Even better, at the same time simplifies the code.
>
> Guenter
>
>
Agreed. Will do it in next patch

Amna


  reply	other threads:[~2024-05-30  8:02 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-29  9:47 [PATCH v2 0/2] hwmon: (ina2xx):Add Suppor for passing alert polarity from device tree to driver Amna Waseem
2024-05-29  9:47 ` [PATCH v2 1/2] dt-bindings: hwmon: ti,ina2xx: Add ti,alert-polarity property Amna Waseem
2024-05-29 16:17   ` Conor Dooley
2024-05-29 16:20     ` Guenter Roeck
2024-05-30  8:02       ` Amna Waseem [this message]
2024-05-29  9:47 ` [PATCH v2 2/2] hwmon: (ina2xx) Add device tree support to pass alert polarity Amna Waseem
2024-05-29 14:11   ` Guenter Roeck
2024-05-30  8:02     ` Amna Waseem

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8a41d875-8e6c-43da-90c7-0547648f214a@axis.com \
    --to=amna.waseem@axis.com \
    --cc=conor+dt@kernel.org \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=kernel@axis.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox