Re: [PATCH 4/4] hwmon: vcnl3020: add hwmon driver for intrusion sensor

[Ivan Mikhaylov <i.mikhaylov@yadro.com>]

On Fri, 2021-04-30 at 09:38 -0700, Guenter Roeck wrote:
> On Fri, Apr 30, 2021 at 06:24:19PM +0300, Ivan Mikhaylov wrote:
> > Intrusion status detection via Interrupt Status Register.
> > 
> > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
> 
> I think this should, if at all, be handled using the
> iio->hwmon bridge (or, in other words, require a solution
> which is not chip specific).

Thanks a lot for suggestion, it's actually looks what's needed here instead of
this driver. Anyways, there is no IIO_PROXIMITY support inside supported types
in iio_hwmon.c. Should I add additional case inside this driver for
IIO_PROXIMITY type?

> I am also not sure if "proximity" is really appropriate to use
> for intrusion detection in the sense of hardware monitoring.
> This would require a proximity sensor within a chassis, which
> would be both overkill and unlikely to happen in the real world.
> "Intrusion", in hardware monitoring context, means "someone
> opened the chassis", not "someone got [too] close".
> 

I'm not sure either but it exists :) And it's exactly for this purpose:
"someone opened the chassis", "how near/far is cover?".