Linux Hardware Monitor development
 help / color / mirror / Atom feed
 messages from 2026-05-07 09:31:33 to 2026-05-11 07:51:34 UTC [more...]

[PATCH RESEND v2 0/5] hwmon: (pmbus/adm1266) blackbox, FW rev, rtc_class, GPIO label
 2026-05-11  7:51 UTC  (6+ messages)
` [PATCH RESEND v2 1/5] hwmon: (pmbus/adm1266) add firmware_revision debugfs entry
` [PATCH RESEND v2 2/5] hwmon: (pmbus/adm1266) add clear_blackbox "
` [PATCH RESEND v2 3/5] hwmon: (pmbus/adm1266) add powerup_counter "
` [PATCH RESEND v2 4/5] hwmon: (pmbus/adm1266) replace probe-time RTC seed with rtc_class device
` [PATCH RESEND v2 5/5] hwmon: (pmbus/adm1266) include adapter number in GPIO line label

[PATCH v2 0/5] hwmon: (pmbus/adm1266) blackbox, FW rev, rtc_class, GPIO label
 2026-05-11  4:48 UTC  (6+ messages)
` [PATCH v2 1/5] hwmon: (pmbus/adm1266) add firmware_revision debugfs entry
` [PATCH v2 2/5] hwmon: (pmbus/adm1266) add clear_blackbox "
` [PATCH v2 3/5] hwmon: (pmbus/adm1266) add powerup_counter "
` [PATCH v2 4/5] hwmon: (pmbus/adm1266) replace probe-time RTC seed with rtc_class device
` [PATCH v2 5/5] hwmon: (pmbus/adm1266) include adapter number in GPIO line label

[PATCH 0/7] hwmon: (pmbus/adm1266) RTC fix, blackbox, FW rev, rtc_class
 2026-05-11  3:46 UTC  (19+ messages)
` [PATCH 1/7] hwmon: (pmbus/adm1266) use wall-clock seconds for SET_RTC
` [PATCH 2/7] hwmon: (pmbus/adm1266) write fractional-seconds field of SET_RTC
` [PATCH 3/7] hwmon: (pmbus/adm1266) add firmware_revision debugfs entry
` [PATCH 4/7] hwmon: (pmbus/adm1266) add clear_blackbox "
` [PATCH 5/7] hwmon: (pmbus/adm1266) add powerup_counter "
` [PATCH 6/7] hwmon: (pmbus/adm1266) register rtc_class device backed by SET_RTC
` [PATCH 7/7] hwmon: (pmbus/adm1266) include adapter number in GPIO line label

[PATCH v3] hwmon: (tmp102) Use device_property_read_string API
 2026-05-10 15:36 UTC  (2+ messages)

[PATCH v1 00/10] platform/x86: msi-wmi-platform: Add fan curves/platform profile/tdp/battery limiting
 2026-05-09 17:25 UTC  (3+ messages)

[PATCH v7 RESEND] hwmon: add driver for ARCTIC Fan Controller
 2026-05-09 15:43 UTC  (3+ messages)

[GIT PULL] hwmon fixes for v7.1-rc3
 2026-05-09 15:40 UTC  (2+ messages)

[PATCH v5 0/3] add support for Delta E50SN12051
 2026-05-09 15:40 UTC  (9+ messages)
` [PATCH v5 1/3] dt-bindings: trivial-devices: Add "
` [PATCH v5 2/3] Documentation/hwmon: add Delta E50SN12051 documentation
` [PATCH v5 3/3] hwmon: (pmbus) add support for Delta E50SN12051

[PATCH v2] hwmon: (tmp102) Use device_property_read_string API
 2026-05-09 14:09 UTC  (3+ messages)

[PATCH] hwmon: (tmp102) Change mode to read label property
 2026-05-09 11:39 UTC  (3+ messages)

[PATCH v4 0/2] AMD Promontory 21 xHCI temperature sensor support
 2026-05-09  6:54 UTC  (19+ messages)
` [PATCH v4 1/2] usb: xhci-pci: add AMD Promontory 21 PCI glue
` [PATCH v4 2/2] hwmon: add AMD Promontory 21 xHCI temperature sensor support

[PATCH v3 0/2] AMD Promontory 21 xHCI temperature hwmon support
 2026-05-08 16:56 UTC  (13+ messages)
` [PATCH v3 1/2] usb: xhci-pci: add generic auxiliary device interface
` [PATCH v3 2/2] hwmon: add AMD Promontory 21 xHCI temperature sensor support

[PATCH 0/3] hwmon: lm93: clean up coding style issues
 2026-05-08 16:27 UTC  (6+ messages)
` [PATCH 1/3] hwmon: lm93: Add missing blank lines after declarations
` [PATCH 2/3] hwmon: lm93: Change unsigned to unsigned int for clarity
` [PATCH 3/3] hwmon: lm93: Remove else blocks after break or return for consistency

[PATCH v4 0/3] add support for Delta E50SN12051
 2026-05-08  8:20 UTC  (4+ messages)
` [PATCH v4 1/3] dt-bindings: hwmon: pmbus: add Delta E50SN12051 binding

[PATCH v1 0/2] Add JHB100 Fan-Tach support
 2026-05-07 15:18 UTC  (5+ messages)
` [PATCH v1 1/2] dt-bindings: hwmon: Add starfive,jhb100-fan-tach

[PATCH] usb: xhci: add AMD PROM21 xHCI hwmon support for temperature monitoring
 2026-05-07 13:24 UTC  (7+ messages)
` [PATCH v2 0/2] AMD PROM21 xHCI temperature hwmon support
  ` [PATCH v2 2/2] hwmon: add initial support for AMD PROM21 xHCI temperature sensor


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox