Linux Hardware Monitor development
 help / color / mirror / Atom feed
From: tze.yee.ng@altera.com
To: Guenter Roeck <linux@roeck-us.net>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Dinh Nguyen <dinguyen@kernel.org>,
	Mahesh Rao <mahesh.rao@altera.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Shuah Khan <skhan@linuxfoundation.org>,
	linux-doc@vger.kernel.org
Subject: [PATCH 0/5] hwmon: add Altera Stratix 10 SoC FPGA hardware  monitor support
Date: Fri, 19 Jun 2026 02:38:51 -0700	[thread overview]
Message-ID: <cover.1781861409.git.tze.yee.ng@altera.com> (raw)

From: Tze Yee Ng <tze.yee.ng@altera.com>

This series adds hardware monitor support for Altera Stratix 10 SoC FPGA
devices. Temperature and voltage sensors are accessed through the 
Stratix 10 service layer and Secure Device Manager.

Patch 1 adds the device tree binding for the hwmon node and sensor layout.
Patch 2 extends the Stratix 10 service layer binding with an optional
hwmon child node. Patch 3 adds async HWMON read commands to the service
firmware driver. Patch 4 adds the hwmon driver, using the async service
interface when available and falling back to synchronous reads otherwise.
Patch 5 enables the hwmon node on the Stratix 10 SoCDK.

Tze Yee Ng (5):
  dt-bindings: hwmon: add Altera Stratix 10 hardware monitor binding
  dt-bindings: firmware: svc: add hwmon property
  firmware: stratix10-svc: add async HWMON read commands
  hwmon: add Stratix 10 SoC FPGA hardware monitor driver
  arm64: dts: socfpga: stratix10: add hwmon node

 .../firmware/intel,stratix10-svc.yaml         |   4 +
 .../bindings/hwmon/altr,stratix10-hwmon.yaml  | 164 +++++
 Documentation/hwmon/index.rst                 |   1 +
 Documentation/hwmon/stratix10-hwmon.rst       |  31 +
 MAINTAINERS                                   |   9 +
 .../boot/dts/altera/socfpga_stratix10.dtsi    |   5 +
 .../dts/altera/socfpga_stratix10_socdk.dts    |  33 +
 drivers/firmware/stratix10-svc.c              |  12 +
 drivers/hwmon/Kconfig                         |  10 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/stratix10-hwmon.c               | 575 ++++++++++++++++++
 include/linux/firmware/intel/stratix10-smc.h  |  38 ++
 12 files changed, 883 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/altr,stratix10-hwmon.yaml
 create mode 100644 Documentation/hwmon/stratix10-hwmon.rst
 create mode 100644 drivers/hwmon/stratix10-hwmon.c

-- 
2.43.7


             reply	other threads:[~2026-06-19  9:39 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-19  9:38 tze.yee.ng [this message]
2026-06-19  9:38 ` [PATCH 1/5] dt-bindings: hwmon: add Altera Stratix 10 hardware monitor binding tze.yee.ng
2026-06-19  9:46   ` sashiko-bot
2026-06-19  9:38 ` [PATCH 2/5] dt-bindings: firmware: svc: add hwmon property tze.yee.ng
2026-06-19  9:44   ` sashiko-bot
2026-06-19  9:38 ` [PATCH 3/5] firmware: stratix10-svc: add async HWMON read commands tze.yee.ng
2026-06-19  9:51   ` sashiko-bot
2026-06-19  9:38 ` [PATCH 4/5] hwmon: add Stratix 10 SoC FPGA hardware monitor driver tze.yee.ng
2026-06-19 11:55   ` sashiko-bot
2026-06-19  9:38 ` [PATCH 5/5] arm64: dts: socfpga: stratix10: add hwmon node tze.yee.ng
2026-06-19  9:49   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1781861409.git.tze.yee.ng@altera.com \
    --to=tze.yee.ng@altera.com \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mahesh.rao@altera.com \
    --cc=robh@kernel.org \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox