Re: [PATCH v3 2/2] hwmon: (fs1603) Add driver for TDK FS160x and FS1006 uPOL converters

[sashiko-bot@kernel.org]

> The TDK FS1603, FS1604, FS1606 and FS1006 are uPOL DC-DC converters with
> an integrated inductor. They report input voltage, output voltage, output
> current and temperature, plus over-voltage, over-current and
> over-temperature status, over a proprietary I2C register map. They are
> not PMBus devices, and their register numbers collide with PMBus command
> codes: 0x21 is a status byte here where PMBus defines VOUT_COMMAND.
> 
> The parts have no ID register, and the FS1606-0600 and FS1606-2500
> presets change how telemetry is encoded: the -2500 uses the 20mV steps
> of the higher voltage parts, and the -0600 needs a current correction
> derived from the IOUT_GAIN register and the output voltage. The model is
> therefore taken from the device name or compatible.
> 
> The over-voltage and over-temperature protection thresholds are
> reported as in1_crit and temp1_crit. The over-voltage threshold is a
> [ ... ]
> reads within four steps of the output keeps a ratio of one.
> 
> Co-developed-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
> Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
> Signed-off-by: Kevin Jia <kjia@nexthop.ai>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261030-fs1603-v3-0-6f8963a74def@nexthop.ai?part=2