From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>
Cc: Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 01/14] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config()
Date: Mon, 27 Jun 2022 18:04:27 +0200 [thread overview]
Message-ID: <20220627160440.31857-2-vkuznets@redhat.com> (raw)
In-Reply-To: <20220627160440.31857-1-vkuznets@redhat.com>
VM_ENTRY_IA32E_MODE control is toggled dynamically by vmx_set_efer()
and setup_vmcs_config() doesn't check its existence. On the contrary,
nested_vmx_setup_ctls_msrs() doesn set it on x86_64. Add the missing
check and filter the bit out in vmx_vmentry_ctrl().
No (real) functional change intended as all existing CPUs supporting
long mode and VMX are supposed to have it.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/kvm/vmx/vmx.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index c30115b9cb33..7d5c837e5a7c 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2610,6 +2610,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
_pin_based_exec_control &= ~PIN_BASED_POSTED_INTR;
min = VM_ENTRY_LOAD_DEBUG_CONTROLS;
+#ifdef CONFIG_X86_64
+ min |= VM_ENTRY_IA32E_MODE;
+#endif
opt = VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL |
VM_ENTRY_LOAD_IA32_PAT |
VM_ENTRY_LOAD_IA32_EFER |
@@ -4247,9 +4250,15 @@ static u32 vmx_vmentry_ctrl(void)
if (vmx_pt_mode_is_system())
vmentry_ctrl &= ~(VM_ENTRY_PT_CONCEAL_PIP |
VM_ENTRY_LOAD_IA32_RTIT_CTL);
- /* Loading of EFER and PERF_GLOBAL_CTRL are toggled dynamically */
- return vmentry_ctrl &
- ~(VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL | VM_ENTRY_LOAD_IA32_EFER);
+ /*
+ * Loading of EFER, VM_ENTRY_IA32E_MODE, and PERF_GLOBAL_CTRL
+ * are toggled dynamically.
+ */
+ vmentry_ctrl &= ~(VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL |
+ VM_ENTRY_LOAD_IA32_EFER |
+ VM_ENTRY_IA32E_MODE);
+
+ return vmentry_ctrl;
}
static u32 vmx_vmexit_ctrl(void)
--
2.35.3
next prev parent reply other threads:[~2022-06-27 16:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-27 16:04 [PATCH 00/14] KVM: nVMX: Use vmcs_config for setting up nested VMX MSRs Vitaly Kuznetsov
2022-06-27 16:04 ` Vitaly Kuznetsov [this message]
2022-06-27 16:04 ` [PATCH 02/14] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING in setup_vmcs_config() Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 03/14] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 04/14] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-06-27 21:36 ` Dong, Eddie
2022-06-28 1:38 ` Sean Christopherson
2022-06-29 20:55 ` Dong, Eddie
2022-06-30 8:14 ` Vitaly Kuznetsov
2022-06-28 12:02 ` Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 05/14] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 06/14] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 07/14] KVM: VMX: Add missing VMENTRY " Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 08/14] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 09/14] KVM: VMX: Clear controls obsoleted by EPT at runtime, not setup Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 10/14] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 11/14] KVM: VMX: Store required-1 VMX controls in vmcs_config Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 12/14] KVM: nVMX: Use sanitized required-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 13/14] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-06-27 16:04 ` [PATCH 14/14] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-06-27 17:50 ` [PATCH 00/14] KVM: nVMX: Use vmcs_config for setting up nested VMX MSRs Jim Mattson
2022-06-28 14:04 ` Vitaly Kuznetsov
2022-06-28 15:28 ` Jim Mattson
2022-06-28 16:01 ` Vitaly Kuznetsov
2022-06-28 17:11 ` Jim Mattson
2022-06-29 9:06 ` Vitaly Kuznetsov
2022-06-29 22:27 ` Jim Mattson
2022-07-06 22:30 ` Sean Christopherson
2022-06-28 9:08 ` Maxim Levitsky
2022-06-28 10:04 ` Vitaly Kuznetsov
2022-06-28 10:08 ` Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220627160440.31857-2-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=anrayabh@linux.microsoft.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).