From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>
Cc: Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 01/28] KVM: x86: hyper-v: Expose access to debug MSRs in the partition privilege flags
Date: Wed, 29 Jun 2022 17:05:58 +0200 [thread overview]
Message-ID: <20220629150625.238286-2-vkuznets@redhat.com> (raw)
In-Reply-To: <20220629150625.238286-1-vkuznets@redhat.com>
For some features, Hyper-V spec defines two separate CPUID bits: one
listing whether the feature is supported or not and another one showing
whether guest partition was granted access to the feature ("partition
privilege mask"). 'Debug MSRs available' is one of such features. Add
the missing 'access' bit.
Fixes: f97f5a56f597 ("x86/kvm/hyper-v: Add support for synthetic debugger interface")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/kvm/hyperv.c | 1 +
include/asm-generic/hyperv-tlfs.h | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index e2e95a6fccfd..e08189211d9a 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -2496,6 +2496,7 @@ int kvm_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
ent->eax |= HV_MSR_RESET_AVAILABLE;
ent->eax |= HV_MSR_REFERENCE_TSC_AVAILABLE;
ent->eax |= HV_ACCESS_FREQUENCY_MSRS;
+ ent->eax |= HV_ACCESS_DEBUG_MSRS;
ent->eax |= HV_ACCESS_REENLIGHTENMENT;
ent->ebx |= HV_POST_MESSAGES;
diff --git a/include/asm-generic/hyperv-tlfs.h b/include/asm-generic/hyperv-tlfs.h
index fdce7a4cfc6f..1d99dd296a76 100644
--- a/include/asm-generic/hyperv-tlfs.h
+++ b/include/asm-generic/hyperv-tlfs.h
@@ -70,6 +70,8 @@
#define HV_MSR_GUEST_IDLE_AVAILABLE BIT(10)
/* Partition local APIC and TSC frequency registers available */
#define HV_ACCESS_FREQUENCY_MSRS BIT(11)
+/* Debug MSRs available */
+#define HV_ACCESS_DEBUG_MSRS BIT(12)
/* AccessReenlightenmentControls privilege */
#define HV_ACCESS_REENLIGHTENMENT BIT(13)
/* AccessTscInvariantControls privilege */
--
2.35.3
next prev parent reply other threads:[~2022-06-29 15:06 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-29 15:05 [PATCH v2 00/28] KVM: VMX: Support TscScaling and EnclsExitingBitmap with eVMCS + use vmcs_config for L1 VMX MSRs Vitaly Kuznetsov
2022-06-29 15:05 ` Vitaly Kuznetsov [this message]
2022-06-29 15:05 ` [PATCH v2 02/28] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 03/28] x86/hyperv: Update " Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 04/28] KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 05/28] KVM: nVMX: Support several new fields in eVMCSv1 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 06/28] KVM: nVMX: Introduce KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-07-06 21:35 ` Sean Christopherson
2022-07-07 9:58 ` Vitaly Kuznetsov
2022-07-07 16:17 ` Sean Christopherson
2022-07-07 16:40 ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 07/28] KVM: selftests: Switch to KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 08/28] KVM: VMX: Support TSC scaling with enlightened VMCS Vitaly Kuznetsov
2022-07-07 10:01 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 09/28] KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 10/28] KVM: selftests: Switch to updated eVMCSv1 definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 11/28] KVM: selftests: Enable TSC scaling in evmcs selftest Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 12/28] KVM: VMX: Enable VM_{EXIT,ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL for KVM on Hyper-V Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 13/28] KVM: VMX: Get rid of eVMCS specific VMX controls sanitization Vitaly Kuznetsov
2022-07-06 22:27 ` Sean Christopherson
2022-07-07 10:03 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 14/28] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config() Vitaly Kuznetsov
2022-06-29 20:28 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 15/28] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING " Vitaly Kuznetsov
2022-07-01 3:58 ` Jim Mattson
2022-07-01 8:12 ` Vitaly Kuznetsov
2022-07-06 18:44 ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 16/28] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Vitaly Kuznetsov
2022-06-29 18:56 ` Jim Mattson
2022-06-30 7:32 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 17/28] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 18/28] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 4:14 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 19/28] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-07-01 16:02 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 20/28] KVM: VMX: Add missing VMENTRY " Vitaly Kuznetsov
2022-07-01 16:01 ` Jim Mattson
2022-07-07 10:41 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 21/28] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-07-01 16:05 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 22/28] KVM: VMX: Clear controls obsoleted by EPT at runtime, not setup Vitaly Kuznetsov
2022-07-01 16:11 ` Jim Mattson
2022-07-07 14:57 ` Vitaly Kuznetsov
2022-07-07 19:30 ` Sean Christopherson
2022-07-07 21:32 ` Jim Mattson
2022-07-07 21:39 ` Sean Christopherson
2022-07-07 23:12 ` Jim Mattson
2022-07-08 7:55 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 23/28] KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 16:26 ` Jim Mattson
2022-07-07 12:07 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 24/28] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-01 22:54 ` Jim Mattson
2022-07-07 12:30 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 25/28] KVM: VMX: Store required-1 VMX controls in vmcs_config Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 26/28] KVM: nVMX: Use sanitized required-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 27/28] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-06-29 18:33 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 28/28] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-06-29 18:37 ` Jim Mattson
2022-06-30 7:36 ` Vitaly Kuznetsov
2022-06-30 12:27 ` Jim Mattson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220629150625.238286-2-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=anrayabh@linux.microsoft.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).