From: Praveen K Paladugu <prapal@linux.microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
decui@microsoft.com, tglx@linutronix.de, mingo@redhat.com,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org,
bp@alien8.de, dave.hansen@linux.intel.com, x86@kernel.org,
hpa@zytor.com, arnd@arndb.de
Cc: anbelski@linux.microsoft.com, prapal@linux.microsoft.com,
easwar.hariharan@linux.microsoft.com,
nunodasneves@linux.microsoft.com,
skinsburskii@linux.microsoft.com
Subject: [PATCH v6 2/3] hyperv: Use reboot notifier to configure sleep state
Date: Wed, 26 Nov 2025 15:49:52 -0600 [thread overview]
Message-ID: <20251126215013.11549-3-prapal@linux.microsoft.com> (raw)
In-Reply-To: <20251126215013.11549-1-prapal@linux.microsoft.com>
Configure sleep state information in mshv hypervisor. This sleep state
information from ACPI will be used by hypervisor to poweroff the host.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-developed-by: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
---
arch/x86/hyperv/hv_init.c | 1 +
arch/x86/include/asm/mshyperv.h | 2 +
drivers/hv/mshv_common.c | 80 +++++++++++++++++++++++++++++++++
3 files changed, 83 insertions(+)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index e28737ec7054..daf97a984b78 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -555,6 +555,7 @@ void __init hyperv_init(void)
hv_remap_tsc_clocksource();
hv_root_crash_init();
+ hv_sleep_notifiers_register();
} else {
hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
wrmsrq(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 10037125099a..166053df0484 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -182,8 +182,10 @@ int hyperv_fill_flush_guest_mapping_list(
void hv_apic_init(void);
void __init hv_init_spinlocks(void);
bool hv_vcpu_is_preempted(int vcpu);
+void hv_sleep_notifiers_register(void);
#else
static inline void hv_apic_init(void) {}
+static inline void hv_sleep_notifiers_register(void) {};
#endif
struct irq_domain *hv_create_pci_msi_domain(void);
diff --git a/drivers/hv/mshv_common.c b/drivers/hv/mshv_common.c
index aa2be51979fd..f1d4e81107ee 100644
--- a/drivers/hv/mshv_common.c
+++ b/drivers/hv/mshv_common.c
@@ -14,6 +14,9 @@
#include <asm/mshyperv.h>
#include <linux/resume_user_mode.h>
#include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
#include "mshv.h"
@@ -138,3 +141,80 @@ int hv_call_get_partition_property(u64 partition_id,
return 0;
}
EXPORT_SYMBOL_GPL(hv_call_get_partition_property);
+
+#ifdef CONFIG_X86_64
+/*
+ * Corresponding sleep states have to be initialized in order for a subsequent
+ * HVCALL_ENTER_SLEEP_STATE call to succeed. Currently only S5 state as per
+ * ACPI 6.4 chapter 7.4.2 is relevant, while S1, S2 and S3 can be supported.
+ *
+ * In order to pass proper PM values to mshv, ACPI should be initialized and
+ * should support S5 sleep state when this method is invoked.
+ */
+static int hv_initialize_sleep_states(void)
+{
+ u64 status;
+ unsigned long flags;
+ struct hv_input_set_system_property *in;
+ acpi_status acpi_status;
+ u8 sleep_type_a, sleep_type_b;
+
+ if (!acpi_sleep_state_supported(ACPI_STATE_S5)) {
+ pr_err("%s: S5 sleep state not supported.\n", __func__);
+ return -ENODEV;
+ }
+
+ acpi_status = acpi_get_sleep_type_data(ACPI_STATE_S5, &sleep_type_a,
+ &sleep_type_b);
+ if (ACPI_FAILURE(acpi_status))
+ return -ENODEV;
+
+ local_irq_save(flags);
+ in = *this_cpu_ptr(hyperv_pcpu_input_arg);
+ memset(in, 0, sizeof(*in));
+
+ in->property_id = HV_SYSTEM_PROPERTY_SLEEP_STATE;
+ in->set_sleep_state_info.sleep_state = HV_SLEEP_STATE_S5;
+ in->set_sleep_state_info.pm1a_slp_typ = sleep_type_a;
+ in->set_sleep_state_info.pm1b_slp_typ = sleep_type_b;
+
+ status = hv_do_hypercall(HVCALL_SET_SYSTEM_PROPERTY, in, NULL);
+ local_irq_restore(flags);
+
+ if (!hv_result_success(status)) {
+ hv_status_err(status, "\n");
+ return hv_result_to_errno(status);
+ }
+
+ return 0;
+}
+
+/*
+ * This notifier initializes sleep states in mshv hypervisor which will be
+ * used during power off.
+ */
+static int hv_reboot_notifier_handler(struct notifier_block *this,
+ unsigned long code, void *another)
+{
+ int ret = 0;
+
+ if (code == SYS_HALT || code == SYS_POWER_OFF)
+ ret = hv_initialize_sleep_states();
+
+ return ret ? NOTIFY_DONE : NOTIFY_OK;
+}
+
+static struct notifier_block hv_reboot_notifier = {
+ .notifier_call = hv_reboot_notifier_handler,
+};
+
+void hv_sleep_notifiers_register(void)
+{
+ int ret;
+
+ ret = register_reboot_notifier(&hv_reboot_notifier);
+ if (ret)
+ pr_err("%s: cannot register reboot notifier %d\n", __func__,
+ ret);
+}
+#endif
--
2.51.0
next prev parent reply other threads:[~2025-11-26 21:50 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-26 21:49 [PATCH v6 0/3] Add support for clean shutdown with MSHV Praveen K Paladugu
2025-11-26 21:49 ` [PATCH v6 1/3] hyperv: Add definitions for MSHV sleep state configuration Praveen K Paladugu
2025-12-01 17:00 ` Stanislav Kinsburskii
2025-11-26 21:49 ` Praveen K Paladugu [this message]
2025-12-01 17:02 ` [PATCH v6 2/3] hyperv: Use reboot notifier to configure sleep state Stanislav Kinsburskii
2025-12-03 17:13 ` Ingo Molnar
2025-12-03 23:02 ` Nuno Das Neves
2025-11-26 21:49 ` [PATCH v6 3/3] hyperv: Cleanly shutdown root partition with MSHV Praveen K Paladugu
2025-12-01 17:05 ` Stanislav Kinsburskii
2025-12-05 19:59 ` Praveen K Paladugu
2025-12-03 23:00 ` Nuno Das Neves
2025-11-29 6:48 ` [PATCH v6 0/3] Add support for clean shutdown " Michael Kelley
2025-12-05 19:58 ` Praveen K Paladugu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251126215013.11549-3-prapal@linux.microsoft.com \
--to=prapal@linux.microsoft.com \
--cc=anbelski@linux.microsoft.com \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=decui@microsoft.com \
--cc=easwar.hariharan@linux.microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=hpa@zytor.com \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=nunodasneves@linux.microsoft.com \
--cc=skinsburskii@linux.microsoft.com \
--cc=tglx@linutronix.de \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).