linux-hyperv.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Praveen K Paladugu <prapal@linux.microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
	decui@microsoft.com, tglx@linutronix.de, mingo@redhat.com,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org,
	bp@alien8.de, dave.hansen@linux.intel.com, x86@kernel.org,
	hpa@zytor.com, arnd@arndb.de
Cc: anbelski@linux.microsoft.com, prapal@linux.microsoft.com,
	easwar.hariharan@linux.microsoft.com,
	nunodasneves@linux.microsoft.com,
	skinsburskii@linux.microsoft.com
Subject: [PATCH v7 3/4] hyperv: Use reboot notifier to configure sleep state
Date: Fri,  5 Dec 2025 14:17:07 -0600	[thread overview]
Message-ID: <20251205201721.7253-4-prapal@linux.microsoft.com> (raw)
In-Reply-To: <20251205201721.7253-1-prapal@linux.microsoft.com>

Configure sleep state information from ACPI in MSHV hypervisor using
a reboot notifier. This data allows the hypervisor to correctly power
off the host during shutdown.

Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-developed-by: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Reviewed-by: Stansialv Kinsburskii <skinsburskii@linux.miscrosoft.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
---
 arch/x86/hyperv/hv_init.c       |  1 +
 arch/x86/include/asm/mshyperv.h |  1 +
 drivers/hv/mshv_common.c        | 78 +++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index e28737ec7054..daf97a984b78 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -555,6 +555,7 @@ void __init hyperv_init(void)
 
 		hv_remap_tsc_clocksource();
 		hv_root_crash_init();
+		hv_sleep_notifiers_register();
 	} else {
 		hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
 		wrmsrq(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 10037125099a..62a89debfbce 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -177,6 +177,7 @@ int hyperv_flush_guest_mapping_range(u64 as,
 int hyperv_fill_flush_guest_mapping_list(
 		struct hv_guest_mapping_flush_list *flush,
 		u64 start_gfn, u64 end_gfn);
+void hv_sleep_notifiers_register(void);
 
 #ifdef CONFIG_X86_64
 void hv_apic_init(void);
diff --git a/drivers/hv/mshv_common.c b/drivers/hv/mshv_common.c
index aa2be51979fd..ee733ba1575e 100644
--- a/drivers/hv/mshv_common.c
+++ b/drivers/hv/mshv_common.c
@@ -14,6 +14,9 @@
 #include <asm/mshyperv.h>
 #include <linux/resume_user_mode.h>
 #include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
 
 #include "mshv.h"
 
@@ -138,3 +141,78 @@ int hv_call_get_partition_property(u64 partition_id,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(hv_call_get_partition_property);
+
+/*
+ * Corresponding sleep states have to be initialized in order for a subsequent
+ * HVCALL_ENTER_SLEEP_STATE call to succeed. Currently only S5 state as per
+ * ACPI 6.4 chapter 7.4.2 is relevant, while S1, S2 and S3 can be supported.
+ *
+ * In order to pass proper PM values to mshv, ACPI should be initialized and
+ * should support S5 sleep state when this method is invoked.
+ */
+static int hv_initialize_sleep_states(void)
+{
+	u64 status;
+	unsigned long flags;
+	struct hv_input_set_system_property *in;
+	acpi_status acpi_status;
+	u8 sleep_type_a, sleep_type_b;
+
+	if (!acpi_sleep_state_supported(ACPI_STATE_S5)) {
+		pr_err("%s: S5 sleep state not supported.\n", __func__);
+		return -ENODEV;
+	}
+
+	acpi_status = acpi_get_sleep_type_data(ACPI_STATE_S5, &sleep_type_a,
+					       &sleep_type_b);
+	if (ACPI_FAILURE(acpi_status))
+		return -ENODEV;
+
+	local_irq_save(flags);
+	in = *this_cpu_ptr(hyperv_pcpu_input_arg);
+	memset(in, 0, sizeof(*in));
+
+	in->property_id = HV_SYSTEM_PROPERTY_SLEEP_STATE;
+	in->set_sleep_state_info.sleep_state = HV_SLEEP_STATE_S5;
+	in->set_sleep_state_info.pm1a_slp_typ = sleep_type_a;
+	in->set_sleep_state_info.pm1b_slp_typ = sleep_type_b;
+
+	status = hv_do_hypercall(HVCALL_SET_SYSTEM_PROPERTY, in, NULL);
+	local_irq_restore(flags);
+
+	if (!hv_result_success(status)) {
+		hv_status_err(status, "\n");
+		return hv_result_to_errno(status);
+	}
+
+	return 0;
+}
+
+/*
+ * This notifier initializes sleep states in mshv hypervisor which will be
+ * used during power off.
+ */
+static int hv_reboot_notifier_handler(struct notifier_block *this,
+				      unsigned long code, void *another)
+{
+	int ret = 0;
+
+	if (code == SYS_HALT || code == SYS_POWER_OFF)
+		ret = hv_initialize_sleep_states();
+
+	return ret ? NOTIFY_DONE : NOTIFY_OK;
+}
+
+static struct notifier_block hv_reboot_notifier = {
+	.notifier_call = hv_reboot_notifier_handler,
+};
+
+void hv_sleep_notifiers_register(void)
+{
+	int ret;
+
+	ret = register_reboot_notifier(&hv_reboot_notifier);
+	if (ret)
+		pr_err("%s: cannot register reboot notifier %d\n", __func__,
+		       ret);
+}
-- 
2.51.0


  parent reply	other threads:[~2025-12-05 20:17 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-05 20:17 [PATCH v7 0/4] Add support for clean shutdown with MSHV Praveen K Paladugu
2025-12-05 20:17 ` [PATCH v7 1/4] fixup! Drivers: hv: Introduce mshv_vtl driver Praveen K Paladugu
2025-12-05 23:06   ` Wei Liu
2025-12-05 23:08     ` Wei Liu
2025-12-05 23:11       ` Wei Liu
2025-12-05 20:17 ` [PATCH v7 2/4] hyperv: Add definitions for MSHV sleep state configuration Praveen K Paladugu
2025-12-05 20:17 ` Praveen K Paladugu [this message]
2025-12-05 20:17 ` [PATCH v7 4/4] hyperv: Cleanly shutdown root partition with MSHV Praveen K Paladugu
2025-12-05 23:26 ` [PATCH v7 0/4] Add support for clean shutdown " Wei Liu
2025-12-10  8:14 ` Nathan Chancellor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251205201721.7253-4-prapal@linux.microsoft.com \
    --to=prapal@linux.microsoft.com \
    --cc=anbelski@linux.microsoft.com \
    --cc=arnd@arndb.de \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=decui@microsoft.com \
    --cc=easwar.hariharan@linux.microsoft.com \
    --cc=haiyangz@microsoft.com \
    --cc=hpa@zytor.com \
    --cc=kys@microsoft.com \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=nunodasneves@linux.microsoft.com \
    --cc=skinsburskii@linux.microsoft.com \
    --cc=tglx@linutronix.de \
    --cc=wei.liu@kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).