From: Anirudh Rayabharam <anirudh@anirudhrb.com>
To: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
decui@microsoft.com, longli@microsoft.com,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mshv: Simplify GPA map/unmap hypercall helpers
Date: Thu, 30 Apr 2026 09:57:29 +0000 [thread overview]
Message-ID: <20260430-augmented-versed-goat-7ca9c1@anirudhrb> (raw)
In-Reply-To: <afIgeaLSiCG4f8lW@skinsburskii.localdomain>
On Wed, Apr 29, 2026 at 08:15:05AM -0700, Stanislav Kinsburskii wrote:
> On Wed, Apr 29, 2026 at 11:02:37AM +0000, Anirudh Rayabharam wrote:
> > On Tue, Apr 28, 2026 at 11:21:12PM +0000, Stanislav Kinsburskii wrote:
> > > Clean up hv_do_map_gpa_hcall() and hv_call_unmap_gpa_pages() after the
> > > preceding bug-fix patches:
> > >
> > > Move "done += completed" before the status checks so that pages mapped
> > > by a partially-successful batch are included in the error cleanup unmap.
> > > Previously these mappings were leaked on failure.
> > >
> > > While here, improve type safety and readability:
> > > - Change "int done" to "u64 done" to match the u64 page_count it is
> > > compared against, avoiding signed/unsigned comparison hazards.
> > > - Use u64 for loop iteration and batch size variables consistently.
> > > - Add proper braces to the for-loop body in hv_do_map_gpa_hcall().
> > > - Remove unnecessary "ret" variable from hv_call_unmap_gpa_pages().
> > > - Simplify the error-path unmap to use "done << large_shift" directly
> > > instead of mutating done in place.
> > >
> > > Fixes: 621191d709b14 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
> > > Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
> > > ---
> > > drivers/hv/mshv_root_hv_call.c | 55 +++++++++++++++-------------------------
> > > 1 file changed, 20 insertions(+), 35 deletions(-)
> > >
> > > diff --git a/drivers/hv/mshv_root_hv_call.c b/drivers/hv/mshv_root_hv_call.c
> > > index e5992c324904a..f5f205a397834 100644
> > > --- a/drivers/hv/mshv_root_hv_call.c
> > > +++ b/drivers/hv/mshv_root_hv_call.c
> > > @@ -195,8 +195,8 @@ static int hv_do_map_gpa_hcall(u64 partition_id, u64 gfn, u64 page_struct_count,
> > > struct hv_input_map_gpa_pages *input_page;
> > > u64 status, *pfnlist;
> > > unsigned long irq_flags, large_shift = 0;
> > > - int ret = 0, done = 0;
> > > - u64 page_count = page_struct_count;
> > > + u64 done = 0, page_count = page_struct_count;
> > > + int ret = 0;
> > >
> > > if (page_count == 0 || (pages && mmio_spa))
> > > return -EINVAL;
> > > @@ -213,8 +213,8 @@ static int hv_do_map_gpa_hcall(u64 partition_id, u64 gfn, u64 page_struct_count,
> > > }
> > >
> > > while (done < page_count) {
> > > - ulong i, completed, remain = page_count - done;
> > > - int rep_count = min(remain, HV_MAP_GPA_BATCH_SIZE);
> > > + u64 i, completed, remain = page_count - done;
> > > + u64 rep_count = min(remain, (u64)HV_MAP_GPA_BATCH_SIZE);
> > >
> > > local_irq_save(irq_flags);
> > > input_page = *this_cpu_ptr(hyperv_pcpu_input_arg);
> > > @@ -224,23 +224,13 @@ static int hv_do_map_gpa_hcall(u64 partition_id, u64 gfn, u64 page_struct_count,
> > > input_page->map_flags = flags;
> > > pfnlist = input_page->source_gpa_page_list;
> > >
> > > - for (i = 0; i < rep_count; i++)
> > > - if (flags & HV_MAP_GPA_NO_ACCESS) {
> > > + for (i = 0; i < rep_count; i++) {
> > > + if (flags & HV_MAP_GPA_NO_ACCESS)
> > > pfnlist[i] = 0;
> > > - } else if (pages) {
> > > - u64 index = (done + i) << large_shift;
> > > -
> > > - if (index >= page_struct_count) {
> > > - ret = -EINVAL;
> > > - break;
> > > - }
> > > - pfnlist[i] = page_to_pfn(pages[index]);
> > > - } else {
> > > + else if (pages)
> > > + pfnlist[i] = page_to_pfn(pages[(done + i) << large_shift]);
> > > + else
> > > pfnlist[i] = mmio_spa + done + i;
> > > - }
> > > - if (ret) {
> > > - local_irq_restore(irq_flags);
> > > - break;
> > > }
> > >
> > > status = hv_do_rep_hypercall(HVCALL_MAP_GPA_PAGES, rep_count, 0,
> > > @@ -248,29 +238,26 @@ static int hv_do_map_gpa_hcall(u64 partition_id, u64 gfn, u64 page_struct_count,
> > > local_irq_restore(irq_flags);
> > >
> > > completed = hv_repcomp(status);
> > > + done += completed;
> > >
> > > if (hv_result_needs_memory(status)) {
> > > ret = hv_call_deposit_pages(NUMA_NO_NODE, partition_id,
> > > HV_MAP_GPA_DEPOSIT_PAGES);
> > > if (ret)
> > > break;
> > > -
> > > } else if (!hv_result_success(status)) {
> > > ret = hv_result_to_errno(status);
> > > break;
> > > }
> > > -
> > > - done += completed;
> > > }
> > >
> > > if (ret && done) {
> > > u32 unmap_flags = 0;
> > >
> > > - if (flags & HV_MAP_GPA_LARGE_PAGE) {
> > > + if (flags & HV_MAP_GPA_LARGE_PAGE)
> > > unmap_flags |= HV_UNMAP_GPA_LARGE_PAGE;
> > > - done <<= large_shift;
> > > - }
> > > - hv_call_unmap_gpa_pages(partition_id, gfn, done, unmap_flags);
> > > + hv_call_unmap_gpa_pages(partition_id, gfn,
> > > + done << large_shift, unmap_flags);
> >
> > How does this work? Earlier we were doing "done << large_shift" only if
> > HV_MAP_GPA_LARGE_PAGE is set but now we always do it.
> >
>
> It works becuase large_shift in initialized to 0 when
> HV_MAP_GPA_LARGE_PAGE is not set.
Oh I see.
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
prev parent reply other threads:[~2026-04-30 9:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 23:21 [PATCH] mshv: Simplify GPA map/unmap hypercall helpers Stanislav Kinsburskii
2026-04-29 11:02 ` Anirudh Rayabharam
2026-04-29 15:15 ` Stanislav Kinsburskii
2026-04-30 9:57 ` Anirudh Rayabharam [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260430-augmented-versed-goat-7ca9c1@anirudhrb \
--to=anirudh@anirudhrb.com \
--cc=decui@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=longli@microsoft.com \
--cc=skinsburskii@linux.microsoft.com \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox